Thread Tools Search this Thread
Old 14 April 2014, 15:31   #11
hamster's Avatar
Country: UK - England
Length: 4m +
Join Date: Aug 2006
Posts: 196
If you can get at it from the flooding hole on the transom, drill a 12mm hole, let the water drain out then fill the hole with gelcoat or epoxy filler.

Freelance skipper, RYA Powerboat Trainer and Advanced Examiner
hamster is offline   Reply With Quote
Old 14 April 2014, 16:27   #12
popeyethesailor's Avatar
Country: UK - England
Town: St Neots ( Cambs)
Boat name: Red Oktober
Make: Avon SR4
Length: 4m +
Engine: 40hp
Join Date: Aug 2013
Posts: 116
Click image for larger version

Name:	ImageUploadedByRIB Net1397510464.852718.jpg
Views:	87
Size:	26.0 KB
ID:	93378

It's not too bad in there problem is drying out the ply that is sandwiched
Between two layers of fibreglass
I guess it will never dry out!
I come across the same problem at work bloody water will get in the tiniest of gaps!!

popeyethesailor is offline   Reply With Quote
Old 15 April 2014, 08:05   #13
Country: Finland
Town: Helsinki
Boat name: SR 5.4
Make: Avon
Length: 4m +
Engine: Toh1 3,5 Yam 90/2S
Join Date: Oct 2009
Posts: 896
Plywood might dry through its own layers so if the wet area is not huge, you might get away by drilling some 100 mm holes through the GRP of the deck sandwich, only exposing plywood, not trough the plywood. Giving additional heat the wood will dry faster, but time it will take anyway. By using a 100 mm plywood pattern, one can remove the small guide drill avoiding not to drill through the deck.

fun on a boat is inversely proportional to size...sort of anyway
C-NUMB is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:37.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.