Reply
 
Thread Tools Search this Thread
 
Old 12 December 2013, 07:35   #21
Member
 
boristhebold's Avatar
 
Country: UK - England
Length: 7m +
Join Date: Aug 2009
Posts: 1,619
The correct length of chain and rope is very important, factor in carrying more rope than you think you would need.

Plus remember an anchor, chain and rope is also a crucial safety device, if you break down somewhere and you dont have enougth anchor chain and rope to hold you in place your going to drift, and you might drift somewhere nasty. Better to carry too much and not need it then too little and need it.

A good example of where you can see what happens when people dont carry enougth or dont have the right chain to rope ratio would be at the bournemouth air show, where the zone is to watch from the water it is rather amusing watching many boats try and anchor and give up as it can be choppy and they just cant get a decent hold as they only have 1 metre of chain or no chain and just rope.
__________________
boristhebold is offline   Reply With Quote
Old 12 December 2013, 07:55   #22
Administrator
 
John Kennett's Avatar
 
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,106
On the other hand it is possible to over think things. Much as I like to have the proper kit for a job, the OP's actual requirements could reasonably be met with a housebrick on a piece of string!
__________________
John Kennett is offline   Reply With Quote
Old 12 December 2013, 08:45   #23
AJ.
RIBnet supporter
 
AJ.'s Avatar
 
Country: UK - England
Town: Warwickshire
Boat name: Impulse
Make: Ribcraft
Length: 5m +
Engine: Suzuki 140
Join Date: Sep 2011
Posts: 1,020
Quote:
Originally Posted by boristhebold View Post

A good example of where you can see what happens when people dont carry enougth or dont have the right chain to rope ratio would be at the bournemouth air show, where the zone is to watch from the water it is rather amusing watching many boats try and anchor and give up as it can be choppy and they just cant get a decent hold as they only have 1 metre of chain or no chain and just rope.
Brings back memories of last year and a gin palace who was more bothered about their hang on the side BBQ than his neighbouring boats (me being one of them) it almost hit a few of us despite people shouting at him! He must of re-laid his anchor a dozen times sure his sausages burnt too..... he he
__________________
AJ. is offline   Reply With Quote
Old 12 December 2013, 08:54   #24
Member
 
chris.moody's Avatar
 
Country: UK - England
Town: Daventry & Beaulieu
Boat name: Tigga2
Make: Ribcraft 4.8
Length: 4m +
Engine: Honda BF50
MMSI: 235900806
Join Date: Jun 2011
Posts: 984
RIBase
I recently purchased 8m of 6mm chain spliced to 30m of warp. I cannot remember the exact cost but it was not expensive (around £30 is the figure I seem to remember).

Using this I can anchor in up to 2m of water and be on all chain, or if I deploy the lot it will hold me off a lee shore in 7m to 10m of water.

£30 well spent in my opinion.

--
Tigga - Avon SR4 Rescue with 40hp Yamaha 2 stroke
__________________
--
Chris Moody
Rib Tigga2 a Ribcraft 4.8 with a Honda BF50
chris.moody is offline   Reply With Quote
Old 12 December 2013, 09:00   #25
Member
 
chris.moody's Avatar
 
Country: UK - England
Town: Daventry & Beaulieu
Boat name: Tigga2
Make: Ribcraft 4.8
Length: 4m +
Engine: Honda BF50
MMSI: 235900806
Join Date: Jun 2011
Posts: 984
RIBase
Quote:
Originally Posted by chris.moody View Post
I recently purchased 8m of 6mm chain spliced to 30m of warp. I cannot remember the exact cost but it was not expensive (around £30 is the figure I seem to remember).

Using this I can anchor in up to 2m of water and be on all chain, or if I deploy the lot it will hold me off a lee shore in 7m to 10m of water.

£30 well spent in my opinion.

--
Tigga - Avon SR4 Rescue with 40hp Yamaha 2 stroke
Just checked, it cost £37 delivered.

--
Tigga - Avon SR4 Rescue with 40hp Yamaha 2 stroke
__________________
--
Chris Moody
Rib Tigga2 a Ribcraft 4.8 with a Honda BF50
chris.moody is offline   Reply With Quote
Old 12 December 2013, 12:30   #26
Member
 
steco1958's Avatar
 
Country: UK - England
Town: West Bromwich
Boat name: Ellie V
Make: Excel Voyager 520
Length: 5m +
Engine: Evinrude 75 HP
MMSI: 235 908 287
Join Date: May 2012
Posts: 689
If you do not have a specific locker then either a crate, or one of those flexible feed buckets you can get from B&Q
__________________
steco1958 is offline   Reply With Quote
Old 12 December 2013, 20:08   #27
Member
 
Country: UK - Wales
Town: west wales
Make: humber destroyer 5m
Length: 5m +
Engine: 90 yamaha
Join Date: Apr 2010
Posts: 202
I'd go with a bruce
not the best to stow but boy do they hold
a boat length (minimum ) of chain and five times (again minimum) of warp of the maximum depth on the chart of the area where you are going
And don't forget to add the height of the tide onto the charted depth
(And then I'd double it.
But that's just me.)
Just remember keep it all correctly stowed, untangled, tied to the boat and ready to go so that if your engine stops you can stay where you are while you try and fix it !
And if you have to call for help you will still be where you said you were when they get there!.
__________________
bosun is offline   Reply With Quote
Old 13 December 2013, 06:18   #28
Member
 
HughN's Avatar
 
Country: UK - England
Town: Littlehampton, W Sx
Length: no boat
MMSI: 235101591
Join Date: Jan 2012
Posts: 732
Quote:
Originally Posted by bosun View Post
...tied to the boat...
By mentioning that you are making me twitch at a memory of seeing a bitter end snaking off into the depths.
__________________
"Can ye model it? For if ye can, ye understand it, and if ye canna, ye dinna!" - Lord kelvin
HughN is offline   Reply With Quote
Old 15 December 2013, 09:13   #29
Member
 
Country: UK - Wales
Town: west wales
Make: humber destroyer 5m
Length: 5m +
Engine: 90 yamaha
Join Date: Apr 2010
Posts: 202
I once sold a little fishing boat and the last bit haggling was that he would have it if I threw in an anchor etc.
So I put an anchor ,a chain and a length of warp in the boat ,plus a couple of shackles expecting that the new owner would have a sort out of his new boat before going out for the first time (like we all would)
Next time I saw him ( we worked together) turns out he went straight home got his tackle and launched it, straight out to sea, stopped engine and threw the anchor over the side never to be seen again.
At least he still had the warp and chain though !
__________________
bosun is offline   Reply With Quote
Old 15 December 2013, 10:11   #30
Member
 
Timw44's Avatar
 
Country: UK - England
Town: Somerset
Boat name: Nimrod
Make: Ribcraft
Length: 5m +
Engine: Suzuki 200
Join Date: Feb 2010
Posts: 39
He probably thought it was one of those new fangled ropeless anchors...
__________________
Timw44 is offline   Reply With Quote
Old 15 December 2013, 11:51   #31
Member
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,405
Quote:
Originally Posted by Alex Head View Post
I am trying to figure out what type and weight of anchor to purchase for my Zodiac 420 Yachtline.

Folding grapnel and mushroom styles look appropriate and do not have sharp edges that could damage tubes. What weight should I consider? Looking for mostly lunch anchor use, not storm use.

Thank you for ANY advice!
Quote:
Originally Posted by John Kennett View Post
On the other hand it is possible to over think things. Much as I like to have the proper kit for a job, the OP's actual requirements could reasonably be met with a housebrick on a piece of string!
I agree with JK, sometimes it pays to keep things simple, I don't go out in bad weather, not up to it at the moment, but do want a good anchor for The Menai, so I use a Bruce along with a Liros leaded rope anchor line, not the cheapest option but does save pulling chain in across the tubes and has worked well for us the last few seasons, worth a look
__________________
Chris Caton is offline   Reply With Quote
Old 15 December 2013, 15:28   #32
Member
 
Country: UK - Wales
Town: west wales
Make: humber destroyer 5m
Length: 5m +
Engine: 90 yamaha
Join Date: Apr 2010
Posts: 202
Anchoring App !
__________________
bosun is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 14:57.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.