Go Back   RIBnet Forums > RIB talk > RIBs & ribbing
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 18 December 2007, 13:44   #41
Member
 
Cookee's Avatar
 
Country: UK - England
Town: Salcombe, Devon, UK
Boat name: BananaShark
Make: BananaShark
Length: 10m +
Engine: 2xYanmar 260 diesels
Join Date: Mar 2003
Posts: 4,225
Quote:
Originally Posted by philb View Post
Out of interest and not wishing to be rude, what sort of budget do you guys give yourself to fund this type of event, over and above your boat, I ask this from the Jo Blogs angle funding himself and not you lucky chaps that can run it along side your boating related business:-) thanks in advance, Phil
I think every boat will be different depending on how much they want to put in - fuel is going to be prepaid, but you can work out how much that will be depending the fuel consumption - entry is £10 per horsepower. You'll need safety equipment, both for the crew and the boat (helmets and race lifejackets can be quite costly depending on where you get them from) - up to date flares etc and the list is quite long! Preparation for the boat can be considerable - you'll need to expect the boat to be able to cope with force 6 -7 easily, and the cost of this will be up to how well the boat is prepared already.

For the actual event you will ideally need a ground crew to follow you around with a trailer - if they are in a motor home then that will reduce the costs quite a lot, but you might have to hire one? If you have Mercury power Barrus are bringing a big spares truck, so you don't need to carry to many spares yourselves which helps.

If you or anyone needs any help with finding stuff let me have a list and I'll try and point you in the right direction!

I'm afraid the short answer is - it depends!
__________________
Cookee
Originally Posted by Zippy
When a boat looks that good who needs tubes!!!
Cookee is offline   Reply With Quote
Old 18 December 2007, 14:23   #42
Member
 
Country: UK - England
Make: extreme 24
Length: 7m +
Engine: merc 6.2 320hp
Join Date: Jul 2004
Posts: 709
well in 1984 they reckoned the big class 1 boats to be spending 10 grand a day,from memory,and i think first prize was 20 grand
__________________
Carl is offline   Reply With Quote
Old 18 December 2007, 15:40   #43
Member
 
Country: UK - England
Town: watford
Boat name: The Bandit &
Make: Hunton Rib
Length: 10m +
Engine: 2 x 8.1 Mercruisers
Join Date: Feb 2007
Posts: 166
Our estimated costs for the event not including the boat is £25-£30 K
We have 3 seats in the boat and 4 crew who will rotate. There is a fair chance that one or more may end up with a back problem. These costs are being split and none of us have boat related businesses.
We see this as the greatest experience that we could have on water.
__________________
the bandit is offline   Reply With Quote
Old 18 December 2007, 16:05   #44
Member
 
Cookee's Avatar
 
Country: UK - England
Town: Salcombe, Devon, UK
Boat name: BananaShark
Make: BananaShark
Length: 10m +
Engine: 2xYanmar 260 diesels
Join Date: Mar 2003
Posts: 4,225
Quote:
Originally Posted by the bandit View Post
Our estimated costs for the event not including the boat is £25-£30 K
We have 3 seats in the boat and 4 crew who will rotate. There is a fair chance that one or more may end up with a back problem. These costs are being split and none of us have boat related businesses.
We see this as the greatest experience that we could have on water.

If it isn't prying too much it would be helpful to know what is included in that - entry, fuel, any support crew other than the fourth crew member? Are you taking any spares and a trailer around with you? (bearing in mind your history! )
__________________
Cookee
Originally Posted by Zippy
When a boat looks that good who needs tubes!!!
Cookee is offline   Reply With Quote
Old 18 December 2007, 16:28   #45
Member
 
Country: UK - England
Town: West Sussex
Boat name: Grey Ghost
Make: Scorpion
Length: 10m +
Join Date: May 2007
Posts: 92
would this be a fair breakdown:
4k Fuel
2.5k Acc/Food etc
3k Ent Fees, 300 engine
1k Courses in my case I/crew would need to do to comply
2k Pers Safety kit, Helmets etc
5k Boat mods, again to comply with race rules
Allow 15K ish, plus lots of beer tokens and a willing mate to drive the Landy and Trailer around the course

value your comments

any sign of Suzuki providing support ?
__________________
philb is offline   Reply With Quote
Old 18 December 2007, 16:43   #46
Member
 
Cookee's Avatar
 
Country: UK - England
Town: Salcombe, Devon, UK
Boat name: BananaShark
Make: BananaShark
Length: 10m +
Engine: 2xYanmar 260 diesels
Join Date: Mar 2003
Posts: 4,225
Quote:
Originally Posted by philb View Post
would this be a fair breakdown:
4k Fuel
2.5k Acc/Food etc
3k Ent Fees, 300 engine
1k Courses in my case I/crew would need to do to comply
2k Pers Safety kit, Helmets etc
5k Boat mods, again to comply with race rules
Allow 15K ish, plus lots of beer tokens and a willing mate to drive the Landy and Trailer around the course

value your comments

any sign of Suzuki providing support ?

Yes I think those are fair - one of the big hidden expenses are the courses - you'll need Day Skipper, sea survival (everyone), VHF (one per boat), and need to do a verbal test with the RYA to get a license if you haven't got one already or meet any of the exemptions. Little things like charts for the GPS can be expensive as well as paper charts. The landy needs to be packed with every concievable spare part! The full license is £200, but you can get a one leg not in charge of the vessel license for only £60

Suzuki haven't announced anything, but it would be worth asking the local dealer if you have a relationship with him if he would lend you some spares on sale or return in return for a sticker on the boat?

What do you intend doing to the boat as preperation?
__________________
Cookee
Originally Posted by Zippy
When a boat looks that good who needs tubes!!!
Cookee is offline   Reply With Quote
Old 18 December 2007, 17:55   #47
Member
 
Country: UK - England
Town: watford
Boat name: The Bandit &
Make: Hunton Rib
Length: 10m +
Engine: 2 x 8.1 Mercruisers
Join Date: Feb 2007
Posts: 166
[
Quote:
QUOTE=Cookee;231248] If it isn't prying too much it would be helpful to know what is included in that - entry, fuel, any support crew other than the fourth crew member? Are you taking any spares and a trailer around with you? (bearing in mind your history! )
[/QUOTE]

Our rough breakdown

£8500 Entry
£7000 fuel
£3500 Hotels for crew
£1200 fuel for American RV and support vehicle
£2000 Food
£1000 Licence
£1000 clothing
£5000 Misc.

RV being used as hospitality and support crew accommodation
__________________
the bandit is offline   Reply With Quote
Old 19 December 2007, 11:21   #48
Member
 
Country: UK - England
Town: Great Horwood
Length: no boat
Join Date: May 2006
Posts: 16
Send a message via Skype™ to ciao!
Quote:
Originally Posted by the bandit View Post
Our rough breakdown

£8500 Entry
£7000 fuel
£3500 Hotels for crew
£1200 fuel for American RV and support vehicle
£2000 Food
£1000 Licence
£1000 clothing
£5000 Misc.

RV being used as hospitality and support crew accommodation
I'm guessing Barry, but that £5000 Misc. is beer?
__________________
ciao! is offline   Reply With Quote
Old 19 December 2007, 15:55   #49
Member
 
Country: UK - England
Town: watford
Boat name: The Bandit &
Make: Hunton Rib
Length: 10m +
Engine: 2 x 8.1 Mercruisers
Join Date: Feb 2007
Posts: 166
Quote:
Quote:
Originally Posted by ciao! View Post
Our rough breakdown

I'm guessing Barry, but that £5000 Misc. is beer?
and wine
__________________
the bandit is offline   Reply With Quote
Old 21 December 2007, 13:01   #50
Member
 
Country: France
Town: Nantes
Boat name: A l'Attaque
Make: Sea-Way
Length: 6m +
Engine: Not here yet
Join Date: Aug 2007
Posts: 455
Quote:
Originally Posted by ciao! View Post
I'm guessing Barry, but that £5000 Misc. is beer?
I thought the beer was the £7000 fuel ?
__________________
Pablo is offline   Reply With Quote
Old 24 December 2007, 19:18   #51
Member
 
Country: Other
Town: East Coast
Make: Chaudron 33
Length: 6m +
Engine: Black uns
MMSI: dunno wot this iz
Join Date: Jul 2007
Posts: 161
http://www.boatmad.com/forum/showthread.php?t=6959
Plenty to read about the race here.
gaZ
__________________
blinddog is offline   Reply With Quote
Old 09 January 2008, 08:35   #52
Administrator
 
John Kennett's Avatar
 
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,106
Mike Lloyd has confirmed that there are still a few places for anyone who wants to make a late entry.

The recent rule change has reduced the minimum boat length for RIBs, making it a bit more accessible.

All the details are on the RB8 web site www.roundbritainrace.co.uk

John
__________________
John Kennett is offline   Reply With Quote
Old 26 January 2008, 08:39   #53
Member
 
Country: UK - England
Town: london
Boat name: psychoactive
Make: ocean
Length: 8m +
Engine: yamaha 240 inboard
Join Date: Jul 2006
Posts: 11
Round Britain

Hi, P1 have managed to move the Tunisian Race to the Beginning of July so the British P1 teams can do RB 8 !!!
__________________
the shrink is offline   Reply With Quote
Old 26 January 2008, 16:52   #54
Administrator
 
John Kennett's Avatar
 
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,106
Looks like you're going to have a busy few weeks. Is getting the boat to the right place at the right time going to be a problem?

John
__________________
John Kennett is offline   Reply With Quote
Old 29 January 2008, 21:23   #55
Member
 
Country: UK - England
Town: Andover
Boat name: Vampire
Make: RIBCRAFT
Length: 7m +
Engine: Suzuki 300
Join Date: Oct 2006
Posts: 58
Our RB08 Website

If anyone is interested here is our RB08 website. We have two RIBs running in the RB4 class.


http://www.pulsardirect.co.uk/pulsarracing/

Huge amount to do including building one of the RIBs! Help / advice always welcome from my fellow RIBNetters.

Also on the scrounge to borrow 4 Nauta Flexible fuel tanks.

Cheers

Greg

www.marinematch.co.uk
enquiries@marinematch.co.uk
__________________
2012Marine is offline   Reply With Quote
Old 30 January 2008, 11:02   #56
Member
 
Cookee's Avatar
 
Country: UK - England
Town: Salcombe, Devon, UK
Boat name: BananaShark
Make: BananaShark
Length: 10m +
Engine: 2xYanmar 260 diesels
Join Date: Mar 2003
Posts: 4,225
Quote:
Originally Posted by 2012Marine View Post
If anyone is interested here is our RB08 website. We have two RIBs running in the RB4 class.


http://www.pulsardirect.co.uk/pulsarracing/

Huge amount to do including building one of the RIBs! Help / advice always welcome from my fellow RIBNetters.

Also on the scrounge to borrow 4 Nauta Flexible fuel tanks.

Cheers

Greg

www.marinematch.co.uk
enquiries@marinematch.co.uk

You asked for advice .............. I would take off the A frame, radar etc, move the throttle so that it can be operated from the left seat, (try throttling and holding on all day with one hand and then imagine you have to do it for 9 more days!), and get some lateral support for those seats, it will take a large amount of energy to stay in the boat when it's going downwind and trying to throw you out every time the bow bites! Double nut and bolt the engine brackets and reinforce the seat and console mountings.

That's all I can see for now!
__________________
Cookee
Originally Posted by Zippy
When a boat looks that good who needs tubes!!!
Cookee is offline   Reply With Quote
Old 25 February 2008, 11:59   #57
Member
 
Country: UK - Scotland
Town: Uphall
Boat name: Iona
Make: Zodiac
Length: 5m +
Engine: Optimax 115
MMSI: 235053483
Join Date: Sep 2006
Posts: 105
Just offered my services for marshall/safety boat duty see you in Edinburgh!
__________________
three-rex is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 18:44.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.