Reply
 
Thread Tools Search this Thread
 
Old 29 March 2010, 13:09   #31
Member
 
Country: UK - England
Town: wolverhampton
Boat name: bumblebee
Make: osprey vipermax
Length: 6m +
Engine: 150 fsi mercury
Join Date: May 2008
Posts: 94
Send a message via MSN to spittle123
antifoul

Quote:
Originally Posted by matt h View Post
-


yep!!
have you tried some g6 cutting paste with a mop brings it up a treat
__________________

__________________
spittle123 is offline   Reply With Quote
Old 06 April 2010, 05:15   #32
Member
 
Country: UK - England
Town: PORTSMOUTH
Make: Avon 5.4
Length: 5m +
Engine: Yamaha 60FE -
Join Date: Sep 2003
Posts: 1,838
right I bought this antifoul stuff called interstrip from international, the supposedly good stuff, what the hell am I doing wrong?!?

I read the instructions, leave on 10minutes and use wooden scraper may need a couple of liberal applications, fine no problem, tried a couple of times, had petrol and plenty of rags to remove residue,

I took hardly anything off, I most dissapointed and left what looks like a really sticky primer and next to impossbile to shift - the crappy dilinet stuff did a better job?! (the oranage sections) admittedly that was left on 12 hours and kind off furred up so to speak

shall I just use a metal scraper? darker area on hull is what it left, I've got a buffing type drill is there a rough attachment I can get for it does anyone know?
Attached Thumbnails
Click image for larger version

Name:	DSC01533.jpg
Views:	110
Size:	82.5 KB
ID:	50259   Click image for larger version

Name:	drillage.JPG
Views:	93
Size:	13.0 KB
ID:	50260  
__________________

__________________
------------------------------
http://www.ollysrib.741.com
ollyit is offline   Reply With Quote
Old 06 April 2010, 08:05   #33
Member
 
Country: UK - Wales
Town: Here
Boat name: doggypaddle
Make: Avon 5.4 Searider
Length: 5m +
Engine: yamaha 80
Join Date: Jul 2007
Posts: 1,107
I found the international AF useless too, i used Dilunet covered in clingfilm to stop it drying out.
like yours, fetched all the af off but not the primer, that was elbow grease and 1200grit wet or dry.
thats why one side of my boat is grey, the other red....got tennis elbow half way through
in hindsight getting it blasted might of been easier.
i even tried nitromoors on a small area, that softened the polyester gel coat more than the paint
__________________
I am usually not as green as i am cabbage looking.
doggypaddle is offline   Reply With Quote
Old 06 April 2010, 14:27   #34
Member
 
Country: UK - England
Town: sheffield
Boat name: black pearl
Make: doral,avon searider
Length: 9m +
Engine: 350 mag
Join Date: Feb 2010
Posts: 26
Use a stanley blade scraper then power sand going down in grades, I assume your not looking for a glass finish as the hull will have to be keyed to take the new antifoul.
__________________
doralmark is offline   Reply With Quote
Old 21 September 2010, 11:31   #35
Member
 
Country: UK - England
Town: Royal Wootton Bassett
Length: 8m +
Engine: 250
Join Date: Jul 2008
Posts: 8,020
Hi, When the antifoul has been removed how do you finish the hull, I have quite a few scrapes & bumps in mine so Iíll have to do some gelcoat repairs first. The boat will be on a trailer so there is no need for antifoul although it will need a coat of something? Is flowcoat the right stuff?
__________________

__________________
whisper is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 10:13.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.