Reply
 
Thread Tools Search this Thread
 
Old 11 April 2009, 07:12   #1
Member
 
Country: UK - England
Boat name: Chubby Rain 2
Make: Valiant
Length: 4m +
Engine: Evinrude 70 (RNLI)
Join Date: Feb 2008
Posts: 107
Quick VHF question

When I call a marina on channel 16 I should ask them to switch to another channel

MInd has gone blank today but would that other channel be a choice of the ship to ship channels 6,8,72,77

or any of the intership channels
__________________
Jon H
Landlocked in Northampton
Jon H is offline   Reply With Quote
Old 11 April 2009, 07:51   #2
Member
 
Country: UK - England
Town: portsmouth
Boat name: patch
Make: avon sr5.4/4m
Length: 5m +
Engine: mercury 90/honda 30
Join Date: Oct 2008
Posts: 291
hi jon do you mean call up a marina (as in a place to berth) on channel 16 because if you do you might get in a bit of trouble !!!!
__________________
tim2658 is offline   Reply With Quote
Old 11 April 2009, 08:35   #3
Member
 
Country: UK - England
Town: Gosport
Boat name: Gee-Gee-Jay
Make: Avon Searider
Length: 4m +
Engine: 40hp Yamaha
MMSI: 235050323
Join Date: May 2006
Posts: 21
Jon,

All marinas should be called on their working channel which is as published in Almanacs, noted on your chart(?) or is available here for UK Marinas. Channel 80 is often used but check the detail for your Marina of choice.

http://www.rib.net/forum/showthread.php?t=4150

Channel 16 should be reserved for Distress, Safety and Calling only.

Regards

Andy
__________________
AndyP is offline   Reply With Quote
Old 11 April 2009, 08:38   #4
Member
 
Country: UK - England
Town: NW& wherever the boat is!
Boat name: depends on m'mood!
Make: Humbers/15-24m cats
Length: 6m +
Engine: etec130/big volvos
MMSI: many and various
Join Date: Nov 2001
Posts: 1,816
1) call a marina on its working channel-see almanac.

2) should you call any shore station on ch16 (eg coastguard) they are always the controlling station and as such they will choose the working channel and start the comms when on that channel.

3) who did your radio course !!!!!!!!!!!!
__________________
Dave M
www.wavelengthtraining.co.uk
wavelength is offline   Reply With Quote
Old 11 April 2009, 10:34   #5
Member
 
SeaSkills's Avatar
 
Country: UK - Scotland
Town: Oban (mostly)
Make: Ribcraft, Humber,BWM
Length: 5m +
Engine: Outboards
Join Date: Jan 2008
Posts: 632
Send a message via Skype™ to SeaSkills
Quote:
Originally Posted by Jon H View Post
When I call a marina on channel 16 I should ask them to switch to another channel

MInd has gone blank today but would that other channel be a choice of the ship to ship channels 6,8,72,77

or any of the intership channels
If we're honest, I guess we all get blanks from time to time, Jon. Well done for asking for a reminder rather than risk getting it wrong.

As others have said, most marinas are on Ch 80. If you don't have an almanac to refer to and there is a particular marina that you'd like to check a working chanel for - just pm me
__________________
SEASKILLS TRAINING
Web; www.seaskills.co.uk
Email; info@seaskills.co.uk
Tel; 07525 012 013
SeaSkills is offline   Reply With Quote
Old 11 April 2009, 20:16   #6
Member
 
Country: Other
Town: San Carlos, Mexico
Boat name: INDE
Make: LOMAC 730
Length: 7m +
Engine: 200 Merc.
MMSI: Please press 1
Join Date: May 2006
Posts: 1,688
Send a message via Skype™ to Limey Linda
[QUOTE=wavelength;290257]
2) should you call any shore station on ch16 (eg coastguard) they are always the controlling station and as such they will choose the working channel and start the comms when on that channel.

I believe this to be correct. 16 is ALSO a call up/general use channel so you will not get in trouble for using it properly to call a marina.

See:http://www.ofcom.org.uk/static/archi...info/ra273.htm

__________________
Running around like a head with it's chicken cut off.
Limey Linda is offline   Reply With Quote
Old 11 April 2009, 23:14   #7
Member
 
TonyC's Avatar
 
Country: UK - Wales
Make: XS // Delta
Length: 6m +
Engine: 60hp // 2x90hp
Join Date: Feb 2007
Posts: 213
Quote:
Originally Posted by Limey Linda View Post
I believe this to be correct. 16 is ALSO a call up/general use channel so you will not get in trouble for using it properly to call a marina.
but would a marina be monitoring 16?
__________________
TonyC is offline   Reply With Quote
Old 12 April 2009, 00:16   #8
Member
 
m chappelow's Avatar
 
Country: UK - England
Town: yorkshire
Boat name: little vicky
Make: avon ex RNLI
Length: 3m +
Engine: tohatsu
Join Date: Mar 2008
Posts: 2,310
i was under the impression that marinas [excluding coastguard ,harbour pilot control ]could only use ch 80 as that is the only channel that they are licenced for ,being shore based as they are not tecnicaly afloat,a few years ago our club was going to get a vhf installed but we could not get a licence for it as we were not a marina and we were not allowed to use any other channels ,
__________________
m chappelow is offline   Reply With Quote
Old 12 April 2009, 04:47   #9
Member
 
SeaSkills's Avatar
 
Country: UK - Scotland
Town: Oban (mostly)
Make: Ribcraft, Humber,BWM
Length: 5m +
Engine: Outboards
Join Date: Jan 2008
Posts: 632
Send a message via Skype™ to SeaSkills
It depends on what licence they have bought from Ofcom. There are 3 Coast Radio Station (CSR) options. Most marinas go for the cheaper option, which is a CSR (Marina) licence. This allows them to use Chs 80, M, and M2 but does not include Ch16, so there is little point trying to call a marina with this type of restricted licence on Ch16 as even if they are listening on a scanner they are not able to reply - at least within the terms of their licence.

Some marinas have chosen to go for the slightly more expensive CSR (International) licence which allows them to use many more channels - including Ch16. They will have a nominated working channel which it would be preferable to call them on, but they might respond on Ch16 and move you to their working channel. The CSR (International) licence also includes Ch80

The third option is a CSR (UK) licence which provides a coast station with a private channel for their own use.
__________________
SEASKILLS TRAINING
Web; www.seaskills.co.uk
Email; info@seaskills.co.uk
Tel; 07525 012 013
SeaSkills is offline   Reply With Quote
Old 13 April 2009, 15:28   #10
JSP
Member
 
Country: UK - England
Town: Southport
Boat name: Qudos
Make: 5.4 Searider
Length: 5m +
Engine: Yam 115 V4
MMSI: 235068784
Join Date: Sep 2008
Posts: 3,930
Quote:
Originally Posted by m chappelow View Post
i was under the impression that marinas [excluding coastguard ,harbour pilot control ]could only use ch 80 as that is the only channel that they are licenced for ,being shore based as they are not tecnicaly afloat,a few years ago our club was going to get a vhf installed but we could not get a licence for it as we were not a marina and we were not allowed to use any other channels ,
I know Fleetwood Dock uses ch12
__________________
JSP is offline   Reply With Quote
Old 14 April 2009, 08:35   #11
Member
 
Country: UK - England
Town: Margate / Ramsgate
Boat name: Bumbl
Make: Scorpion
Length: 8m +
Engine: Yanmar diesel
Join Date: Feb 2002
Posts: 2,837
I would like to add that most HARBOURS will have a different channel to the MARINA and it's important to distinguish the difference and in many circumstances necessary to use both when entering a "new" port and then seeking a berth.

EG:
Dover port control CH 12
Dover Marina: 80

Ramsgate port control: CH 14
Ramsgate Marina: 80
__________________
Daniel is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 10:28.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.