Go Back   RIBnet Forums > RIB talk > RIBs & ribbing
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 05 December 2007, 15:54   #1
Member
 
Country: Ireland
Town: Castlebar
Boat name: Clewless
Make: Valiant DR 490
Length: 4m +
Engine: 60 hp ETEC
MMSI: Awaitng one
Join Date: Oct 2007
Posts: 1,339
RIBase
Purchae of a Valiant DR 450 ???

I am considering purchasing a Valiant DR 450 for use with my Tiller steer 40 hp outboard. I was originally thinking of going down the SIB route but I believe that a SIB would be Too wet and bouncy for the family.

I am wondering if there is any one out there with a DR 450. If so how do they like it ?
Has any one a similar sized rig with a Tiller steer?
Does the Dr 450 give a confortable and dry ride?



The rib would be used for some diving and snorkling and beach work
__________________
two stroke mick is offline   Reply With Quote
Old 05 December 2007, 16:44   #2
Member
 
Country: UK - England
Town: Midlands
Make: Nautique
Length: 6m +
Engine: PCM 5.7l
Join Date: Oct 2003
Posts: 1,082
We had a v-490, was a good boat. Sold it after 3 years for the same as we paid for it.
__________________
simmons0 is offline   Reply With Quote
Old 05 December 2007, 17:42   #3
Member
 
Tim M's Avatar
 
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
This is one used for a while by the RNLI. I would image it would be fine with a tiller steer:
Attached Thumbnails
Click image for larger version

Name:	VALIANT_D.JPG
Views:	797
Size:	67.2 KB
ID:	31662  
__________________
Tim M is offline   Reply With Quote
Old 05 December 2007, 17:53   #4
RAD
Member
 
Country: UK - England
Town: Essex
Boat name: Club Boat
Length: no boat
Engine: Yam 40hp
Join Date: Dec 2006
Posts: 288
We were going to go down this route. Got to the point we considered ordering until a search found Humber had an offer on at the time.

So I think a 4.5mtr with tiller still will be fine, as long as you have the muscle to pull the starter cord!!
__________________
RAD is offline   Reply With Quote
Old 05 December 2007, 19:39   #5
Member
 
Country: Ireland
Town: Castlebar
Boat name: Clewless
Make: Valiant DR 490
Length: 4m +
Engine: 60 hp ETEC
MMSI: Awaitng one
Join Date: Oct 2007
Posts: 1,339
RIBase
Tim M have you any other photos of the DR450 by the RNLI
__________________
two stroke mick is offline   Reply With Quote
Old 06 December 2007, 00:19   #6
Member
 
Country: UK - England
Town: cornwall
Boat name: nothing
Make: rib eye 430
Length: 4m +
Engine: tatsu 50
MMSI: 666
Join Date: Mar 2006
Posts: 1,914
The 490 was a very dry ride for its size . 450 tiller steer sounds like fun to me . The valiants are good value for money boats IMO , someone will probably slag off pvc tubes in a minute but they are fine , mine was 7 years old and the tubes were like new not even faded . If the RNLI are happy to use them then
__________________
ian parkes is offline   Reply With Quote
Old 06 December 2007, 07:43   #7
Member
 
Country: Ireland
Town: Castlebar
Boat name: Clewless
Make: Valiant DR 490
Length: 4m +
Engine: 60 hp ETEC
MMSI: Awaitng one
Join Date: Oct 2007
Posts: 1,339
RIBase
Do you think that I would require a type of damper system for the tiller steer outboard (40hp)? If so are they standard or do they just fit the engines used on the Zap Cats
__________________
two stroke mick is offline   Reply With Quote
Old 06 December 2007, 08:31   #8
Member
 
Tim M's Avatar
 
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
Quote:
Originally Posted by two stroke mick View Post
Tim M have you any other photos of the DR450 by the RNLI
Just one more. It was used about 4 years ago at the South Broads station in Norfolk as an alternative to using a d-class. They preferred the Valiant but it created more wash than the D-class I believe, hence they got rid of it.
Attached Thumbnails
Click image for larger version

Name:	Vally2.jpg
Views:	585
Size:	48.2 KB
ID:	31668  
__________________
Tim M is offline   Reply With Quote
Old 06 December 2007, 11:26   #9
Member
 
Country: Ireland
Town: Castlebar
Boat name: Clewless
Make: Valiant DR 490
Length: 4m +
Engine: 60 hp ETEC
MMSI: Awaitng one
Join Date: Oct 2007
Posts: 1,339
RIBase
Tim M

Why would the wash generated by the DR 450 be a problem for the RNLI. Thanks for the photos. I notice that they fitted a proper drainage trunk onto the boat..

Two stroke
__________________
two stroke mick is offline   Reply With Quote
Old 06 December 2007, 11:31   #10
Member
 
Tim M's Avatar
 
Country: France
Town: Côte d'Azur
Boat name: Beaver Patrol
Make: Avon Searider SR4
Length: 4m +
Join Date: Jan 2004
Posts: 5,934
This was the South Broads station, which serves the Broads - inland waterways consisting of large lakes with interconnecting rivers some of which are quite narrow. Wash is seen as a big issue on the Broads, more so than speed, as it causes bank erosion which results in silting up of the bottom. The Broads Authority invest millions every year in dredging the Broads trying to keep them clear, hence the RNLI wanted to find the most suitable craft for that location. They also tried one of those A class (it is A class isn't it??) that they normally use on beaches. In the end, as I said they went back to using a D class. They also have one of those tiny ones thats normally a tender to all weather boats, which they use in areas where there is hardly any depth. They normally keep that boat on the back of a truck, which can be driven anywhere in the broads and the boat launched in the event of an emergency. Pretty cool stuff
__________________
Tim M is offline   Reply With Quote
Old 07 December 2007, 00:03   #11
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by ian parkes View Post
someone will probably slag off pvc tubes in a minute but they are fine ,
I think that is because valiant use Polyurethane (PU) rather than poly vinyl chloride (pvc). generally considered much better (although some folks would still argue not as good as hypalon)
__________________
Poly is offline   Reply With Quote
Old 07 December 2007, 02:36   #12
Member
 
Country: Canada
Town: British Columbia
Make: Gemini
Length: 4m +
Engine: 40hp 2 str
Join Date: Oct 2003
Posts: 2,151
Quote:
Originally Posted by Polwart View Post
I think that is because valiant use Polyurethane (PU) rather than poly vinyl chloride (pvc). generally considered much better (although some folks would still argue not as good as hypalon)
That looks to be correct with their DR series boats, according to their website. Seems like a pretty good boat.
__________________
prairie tuber is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 16:21.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.