Reply
 
Thread Tools Search this Thread
 
Old 04 September 2010, 14:59   #1
Member
 
Country: UK - England
Length: 3m +
Join Date: Aug 2010
Posts: 31
patching pvc

hi,im in the middle of repairing my 3metre valiant rib,ive patched one small hole with no problems,the problem ive got is the other repair is in a bit of an awkward position(underneath and near the transom),ive tried to apply patch with tube deflated and ended up with a crease under the patch so ive had to start again,can i apply the new patch with the tube semi inflated so i can eliminate the crease,then once the patch is in place deflate the tube and apply pressure to the patch.
thanks in advance
Andy
__________________

__________________
soley1 is offline   Reply With Quote
Old 04 September 2010, 16:48   #2
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 4,962
A couple of things for you to try, use super glue to tack the edges together to keep them aligned while you make the proper repair or stitch the edges if necessary to align them.
__________________
JW.
jwalker is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 10:35.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.