New Scorpion Launched - Page 2

howe · 11 April 2008, 14:09

This is the first that I have heard of it. Although looking at the shipping forecast, it might help on our run down to Plymouth tomorrow from the Solent. Gavin

www.rib-racers.com

Cookee · 14 April 2008, 11:19

What happened?

Did you go - it was a bit lively out there!

philb · 15 April 2008, 13:44

cookee, change of plan, we went east in search of a good cup of coffee, check out his blog
have to say that 300xs sounds great on and out of the water

howe · 17 April 2008, 15:48

Might aim to come West on the weekend after next. Plan would be to leave the Solent on Saturday morning and return fairly early on Sunday. Will let you know closer to the time. We certainly deserve some better weather!

Gavin
www.rib-racers.com

Cookee · 18 April 2008, 15:02

Quote:

Originally Posted by howe

Might aim to come West on the weekend after next. Plan would be to leave the Solent on Saturday morning and return fairly early on Sunday. Will let you know closer to the time. We certainly deserve some better weather!

Gavin
www.rib-racers.com

26 - 27 is the Plymouth boat show although I wouldn't travel too far to see it!

Looking forward to seeing the beast!

gtflash · 20 April 2008, 21:14

today i saw a gorgeous rib past calshot with a rooster to be very proud of! looked to be scorpion and was an inboard.... looked alot faster than it seemed to be running but my god what a rooster!!!!!

howe · 20 April 2008, 22:16

We were in Lymington this afternoon at 4pm and a large diesel Scorpion came back for lifting out. She looked about 9 metres with a hard nose. I think this may have been your boat. Gavin

www.rib-racers.com

gtflash · 21 April 2008, 21:23

Quote:

Originally Posted by howe

We were in Lymington this afternoon at 4pm and a large diesel Scorpion came back for lifting out. She looked about 9 metres with a hard nose. I think this may have been your boat. Gavin

www.rib-racers.com

sounds a bout right, def hard nose or anchor locker raised! whitish in colour! i want a rooster lol

iandl · 18 May 2008, 08:14

Quote:

Originally Posted by howe

After what seems like a long wait given that we ordered it in September, we took delivery of our new 8.5 metre Scorpion yesterday. Weather couldn't have been worse, but boat seems fine and we are now spending some time getting to know the boat and running the engine in - a Mercury 300XS. We are doing the Round Britain Race in June so the expensive Ullman seats might be necessary! Our site for the race is www.rib-racers.com

Gavin

Gavin as a matter of interest are the Ullman seats padded or are they neoprene over a grp shell ...cheers

Ian

howe · 18 May 2008, 15:10

Ian, The Ullman seats are padded but quite firm. Not sure what's under the open weave stretch fabric seat covers. Mine (like most Ullmans) are the jockey seats which need to hold their shape - Ullman regular type seats may be different.
All things are relative but the luxury comes from them taking the impact through the suspension rather than from the softness of the seat itself. You also need to sit back into them as I know of someone who did hurt themselves by perching in the front of the seat which is relatively unsprung. Greg Marsden is demonstrating them at 2012 Marine and is also doing the Round Britain Race.
We have fitted toe straps which I would judge as essential as the seats have no side support for good ergonomic reasons - you just need to keep a firm footing!

Gavin.

www.rib-racers.com

iandl · 18 May 2008, 15:49

Quote:

Originally Posted by howe

Ian, The Ullman seats are padded but quite firm. Not sure what's under the open weave stretch fabric seat covers. Mine (like most Ullmans) are the jockey seats which need to hold their shape - Ullman regular type seats may be different.
All things are relative but the luxury comes from them taking the impact through the suspension rather than from the softness of the seat itself. You also need to sit back into them as I know of someone who did hurt themselves by perching in the front of the seat which is relatively unsprung. Greg Marsden is demonstrating them at 2012 Marine and is also doing the Round Britain Race.
We have fitted toe straps which I would judge as essential as the seats have no side support for good ergonomic reasons - you just need to keep a firm footing!

Gavin.

www.rib-racers.com

Thanks Gavin ......I am making something very similar ......I like the ullman seat shape but not the back support.....would you recommend side supports? something along the lines what you see on scorpion jockeys

looking forward to seeing your boat in Inverness during RB in june

cheers

Ian

howe · 18 May 2008, 18:52

I think the Ullman people would argue that you need to be able to move sideways (and stay vertical) as the boat isn't always going straight up and down. People who are more used to seats and bolsters often don't like this approach.

When I used to drive our previous Scorpion with the curved backrests, I would sometimes get a dig in the ribs when we landed at an angle. Personally, I'm not sure that a combination of a moving seat and a fixed bolster is the way to go. I know some who are trying this approach for the Round Britain Race.

Several have commented on the lack of side support and we feel okay using foot straps. The area when we need to be carefully is if we dig into the back of a wave and then turn. It might to be easy to slide forwards off the seat.

Anyway by the end of June I might have an answer! See you in Inverness. Gavin

www.rib-racers.com