Reply
 
Thread Tools Search this Thread
 
Old 02 December 2006, 20:34   #1
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
New MAIB Safety Digest - including RIB incident

http://www.maib.gov.uk/cms_resources...re%20craft.pdf

Last "article" includes the findings of the RIB accident originally reported on RIBnet here http://rib.net/forum/showthread.php?t=14245

All the usual stuff about drinking and boating, understanding the handling characteristics. However their are also comments on the suitability of the life jackets worn (both were wearing PFDs).

The driver WAS wearing the kill cord - but the MAIB imply that as it was attached round his WRIST it got tangled and so failed to operate.
__________________
Poly is offline   Reply With Quote
Old 02 December 2006, 22:03   #2
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Always useful reading - learn by the mistakes of others.

They weren't both wearing PFDs - the poor bloke who died was wearing a 150N lifejacket - but a manually inflated one. For some reason he didn't inflate it even though he was alive for a while. the person who survived WAS wearing a PFD so you could say a PFD is better than a manual 150N jacket!!!

As to the kill cord it could just as easily got stuck around something if clipped on elsewhere.

They mention drink as a factor but I am not so sure. He was 2x the road limit for driving but that didn't seem to be a factor. This was a tragic ACCIDENT and I don't think any amount of hindsight could have prevented it.
__________________
codprawn is offline   Reply With Quote
Old 02 December 2006, 23:05   #3
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by codprawn View Post
They weren't both wearing PFDs - the poor bloke who died was wearing a 150N lifejacket - but a manually inflated one. For some reason he didn't inflate it even though he was alive for a while. the person who survived WAS wearing a PFD so you could say a PFD is better than a manual 150N jacket!!!
I was using PFD in the generic sense of "personal flotation device" as they would (I believe) in the US (and I think elsewhere too) - which covers both bouyancy aids and life jackets. Appologies if I confused you.

Quote:
As to the kill cord it could just as easily got stuck around something if clipped on elsewhere.
I'm not convinced of that. I do think it is more likely to get tangled round the wrist. But I think the point is - if it is securely attached to leg or PFD then it is much less likely to come off during "ejection" than if it only has to slip off the wrist.

Quote:
They mention drink as a factor but I am not so sure. He was 2x the road limit for driving but that didn't seem to be a factor.
They certainly didn't dwell on it the way they have in other reports. But they do suggest it may have contributed to the initial event in the chain. It may also have contributed to the driver not inflating his life jacket and/or his ability to survive whilst awaiting rescue.

Quote:
This was a tragic ACCIDENT and I don't think any amount of hindsight could have prevented it.
I agree it was an accident but I think there are lessons to be learnt and declaring something as simply an accident suggests the outcome cannot be avoided in the future - which contradicts your opening statement:
Quote:
Always useful reading - learn by the mistakes of others.
__________________
Poly is offline   Reply With Quote
Old 02 December 2006, 23:23   #4
Member
 
Country: Other
Town: Oakley
Boat name: Zerstörer
Make: Ribcraft
Length: 5m +
Engine: Suzuki DF 140
MMSI: 235050131
Join Date: Jun 2003
Posts: 3,931
I have read the report and take issue with the statement that it was a nice spring day. I was out on a RIB that day in the West Solent during lunch time. Having launched in Southampton I went to the Needles, visited yarmouth briefly and returned to Southampton. In my view it wasn't a very nice day at all. Okay it wasn't raining but it was breezy and it was cold. Off the Needles there was a big swell, with large rollers coming in. Bad enough for me to not hang around in them. I did hear of this report later on when I got home and I immediately thought that if the guys were in the drink for more than 10 minutes without a drysuit they would probably die.

Without seeing the proper report which is usually very detailed it would be unfair to pass judgement on anything that happened that day. This report is almost like a poster. Usually the reports are very detailed and it seems this one is missing much of the finer print.
__________________
https://www.xfire.com/download/
Biggles is offline   Reply With Quote
Old 02 December 2006, 23:36   #5
Member
 
Richard B's Avatar
 
Country: UK - England
Town: Devon
Boat name: White Ice
Make: Ranieri
Length: 5m +
Engine: Suzuki 115hp
Join Date: Jul 2002
Posts: 5,015
Quote:
Originally Posted by codprawn View Post
As to the kill cord it could just as easily got stuck around something if clipped on elsewhere.
My own experience moves me to disagree with you here - I've tried various points for attaching the killcord and found that the wrist was the worst, the lifejacket the most secure but most difficult to attach and detach, and around the knee to be the best as it has never snagged on anything for me.[/I]

Quote:
Originally Posted by codprawn View Post
They mention drink as a factor but I am not so sure. He was 2x the road limit for driving but that didn't seem to be a factor.
I think that you'll find that you're contradicting medical fact here - IIRC you are more at risk of hypothermia if you have been drinking. Where's that Manning bloke when you need him?
Richard B is offline   Reply With Quote
Old 03 December 2006, 00:12   #6
Member
 
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
Quote:
Originally Posted by Richard B View Post
.... Where's that Manning bloke when you need him?

Probably down the pub
__________________
Downhilldai is offline   Reply With Quote
Old 03 December 2006, 00:14   #7
Member
 
Richard B's Avatar
 
Country: UK - England
Town: Devon
Boat name: White Ice
Make: Ranieri
Length: 5m +
Engine: Suzuki 115hp
Join Date: Jul 2002
Posts: 5,015
Quote:
Originally Posted by Downhilldai View Post
Probably down the pub
In that case I hope he's got his drysuit and lifejacket with him, it's stormy out there tonight!
Richard B is offline   Reply With Quote
Old 03 December 2006, 00:21   #8
Member
 
Country: UK - Wales
Town: West Wales
Make: Vipermax 5.8, SR4.7
Length: 5m +
Engine: 150 Opti, F50EFi
Join Date: Sep 2005
Posts: 6,299
He'll only be wet on the inside
__________________
Downhilldai is offline   Reply With Quote
Old 03 December 2006, 00:34   #9
Member
 
Country: Other
Town: Oakley
Boat name: Zerstörer
Make: Ribcraft
Length: 5m +
Engine: Suzuki DF 140
MMSI: 235050131
Join Date: Jun 2003
Posts: 3,931
As with all reports its always good to be wise after the event. sorry to hear someone died, but if we worried about every risk we took wouldn't life be boring.
Whats worrying is the fact that the killcord didn't work, which left the two guys without a means of getting out of the water, because the boat carried on its merry way, and subsequently one of the poor guys froze to death.
Irrelevant of alchohol issues or lifejacket issues to me the kill cord working properly might have saved them.
Thats the issue that should be looked at more in my mind, and its probably one that should be thought about more by all us RIBSTERs than anything else.
Being in a high speed boat in rough seas is fun but when you fall out of it some means of getting back in is required. I have often mulled over this because I have personal experience of struggling to get back in to a RIB. Firstly I think we need to make sure the killcord is going to work. Then we need a means of getting back on the stationary boat. I don't think swimming is one of those options unless its dead calm. My answer would be to have an extending line on our lifejacket that we could pull on to get ourselves back to the boat. And by extending line I mean one that is perhaps 50 meters long and not one that the yachties use. It might not be feasable most of the time but if your going to have some fun in big waves then I think it should be considered part of your safety equipment along with a lifejacket and for us RIBSTERs a drysuit.
__________________
https://www.xfire.com/download/
Biggles is offline   Reply With Quote
Old 03 December 2006, 01:23   #10
Member
 
Country: Canada
Town: British Columbia
Make: Gemini
Length: 4m +
Engine: 40hp 2 str
Join Date: Oct 2003
Posts: 2,151
Quote:
Originally Posted by Richard B View Post
- IIRC you are more at risk of hypothermia if you have been drinking.

Absolutely correct. Alcohol will cause the blood vessels at the extemities to dilate which will take blood away from the body core. You will 'feel' warmer, however body core temperature will drop much more quickly.
__________________
prairie tuber is offline   Reply With Quote
Old 03 December 2006, 01:40   #11
Member
 
Country: UK - Wales
Town: swansea
Boat name: Too Blue
Make: BLANK
Length: 8m +
Engine: Suzuki DT225
Join Date: Mar 2004
Posts: 12,791
Quote:
Originally Posted by Biggles View Post
Being in a high speed boat in rough seas is fun but when you fall out of it some means of getting back in is required. I have often mulled over this because I have personal experience of struggling to get back in to a RIB. Firstly I think we need to make sure the killcord is going to work. Then we need a means of getting back on the stationary boat. I don't think swimming is one of those options unless its dead calm. My answer would be to have an extending line on our lifejacket that we could pull on to get ourselves back to the boat. And by extending line I mean one that is perhaps 50 meters long and not one that the yachties use. It might not be feasable most of the time but if your going to have some fun in big waves then I think it should be considered part of your safety equipment along with a lifejacket and for us RIBSTERs a drysuit.
This has I think been talked about before. I would be worried about getting tangled up in the line but the chances of swimming back to the boat in a strong wind are pretty remote.
__________________
codprawn is offline   Reply With Quote
Old 03 December 2006, 06:19   #12
Administrator
 
John Kennett's Avatar
 
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,106
Quote:
Originally Posted by Richard B View Post
My own experience moves me to disagree with you here - I've tried various points for attaching the killcord and found that the wrist was the worst, the lifejacket the most secure but most difficult to attach and detach, and around the knee to be the best as it has never snagged on anything for me.
I agree. I don't consider the wrist to be a suitable place for attaching a kill cord for two reasons: it tends to snag on the steering wheel, and it's likely to come off when you need it most.

Clipping onto the lifejacket is secure, but I've found that it still tends to get in the way. Round the knee keeps it secure and out of the way - that's my choice every time.

John
__________________
John Kennett is offline   Reply With Quote
Old 03 December 2006, 07:49   #13
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,053
RIBase
Quote:
Originally Posted by Biggles View Post
As with all reports its always good to be wise after the event. sorry to hear someone died, but if we worried about every risk we took wouldn't life be boring.
Yep. TThere but for the grace of god go most of us.
Quote:
Originally Posted by Biggles View Post
Whats worrying is the fact that the killcord didn't work, which left the two guys without a means of getting out of the water, because the boat carried on its merry way, and subsequently one of the poor guys froze to death.
Irrelevant of alchohol issues or lifejacket issues to me the kill cord working properly might have saved them.
I'd go along with that-particularly as they had apparently just made a sharp turn. The boat can't have been travelling particularly fast at the point of ejection.
Quote:
Originally Posted by Biggles View Post
Thats the issue that should be looked at more in my mind, and its probably one that should be thought about more by all us RIBSTERs than anything else.
Being in a high speed boat in rough seas is fun but when you fall out of it some means of getting back in is required. I have often mulled over this because I have personal experience of struggling to get back in to a RIB. Firstly I think we need to make sure the killcord is going to work.
Yes. May I suggest btw if you're wearing slippery clothes (membrane drysuit,oilskins etc that possibly the leg/knee isn't the best place to have it attached unless it's held there in some way.I've had mine slip down on several occasions and it could easily have slipped off my foot if I went overboard at that moment. Maybe the crotchstrap of a lifejacket or a dedicated loop for the cord attached to the knee of the clothing? It'd only be a few minutes job to do with some drysuit glue.
Quote:
Originally Posted by Biggles View Post
Then we need a means of getting back on the stationary boat. I don't think swimming is one of those options unless its dead calm. My answer would be to have an extending line on our lifejacket that we could pull on to get ourselves back to the boat. And by extending line I mean one that is perhaps 50 meters long and not one that the yachties use. It might not be feasable most of the time but if your going to have some fun in big waves then I think it should be considered part of your safety equipment along with a lifejacket and for us RIBSTERs a drysuit.
I'm going to disagree with that particular method-simply because as you hit the water there's no garuantee which way you'll land, whether you'll tumble or skip across the surface if at a particularly high speed etc. It's bloody hard to untangle yourself from a rope while in the water (done it and it was NOT a fun incident ) and IMO it'd be even harder if the rope was tensioned.

You're right-the boat isn't going to make more than 50 metres with no power immediately after MOB though.
I DO however have an idea. What about a simple form of line-thrower (spring loaded perhaps?) that would throw a floating line 50 or so metres directly astern-or maybe aimable-controlled by a waterproof car alarm type keyfob with a dsc type cover over the buttons? Something like this Restech pneumatic line thrower with a remote button-or even a cord like a killcord which would be attached to the person nearest the unit.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 03 December 2006, 07:59   #14
Member
 
Ian M's Avatar
 
Country: UK - England
Town: New Milton
Boat name: Jianna
Make: Osprey
Length: 6m +
Engine: 200 E-TEC
MMSI: 235076954
Join Date: Sep 2004
Posts: 1,940
Quote:
Originally Posted by Nos4r2 View Post
Yep. TThere but for the grace of god go most of us.

I'd go along with that-particularly as they had apparently just made a sharp turn. The boat can't have been travelling particularly fast at the point of ejection.

Yes. May I suggest btw if you're wearing slippery clothes (membrane drysuit,oilskins etc that possibly the leg/knee isn't the best place to have it attached unless it's held there in some way.I've had mine slip down on several occasions and it could easily have slipped off my foot if I went overboard at that moment. Maybe the crotchstrap of a lifejacket or a dedicated loop for the cord attached to the knee of the clothing? It'd only be a few minutes job to do with some drysuit glue.


I'm going to disagree with that particular method-simply because as you hit the water there's no garuantee which way you'll land, whether you'll tumble or skip across the surface if at a particularly high speed etc. It's bloody hard to untangle yourself from a rope while in the water (done it and it was NOT a fun incident ) and IMO it'd be even harder if the rope was tensioned.

You're right-the boat isn't going to make more than 50 metres with no power immediately after MOB though.
I DO however have an idea. What about a simple form of line-thrower (spring loaded perhaps?) that would throw a floating line 50 or so metres directly astern-or maybe aimable-controlled by a waterproof car alarm type keyfob with a dsc type cover over the buttons? Something like this Restech pneumatic line thrower with a remote button-or even a cord like a killcord which would be attached to the person nearest the unit.
Er, I'm hanving enough trouble with consoles, without having to think about mounting a turret on top
__________________
Ian

Dust creation specialist
Ian M is offline   Reply With Quote
Old 03 December 2006, 08:02   #15
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,053
RIBase
Quote:
Originally Posted by Ian M View Post
Er, I'm hanving enough trouble with consoles, without having to think about mounting a turret on top

You couldn't do that-Someone come along and shoot you 8 times in the head

It'd be a simple enough job to attach a line-thrower directly to the a-frame pointing astern though.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 03 December 2006, 09:41   #16
Member
 
Country: UK - Wales
Town: Milford Haven
Boat name: Various
Make: Commercial
Length: 10m +
Engine: Screw / Voith / Jets
Join Date: Sep 2002
Posts: 792
Send a message via MSN to Alex Brown
That's quite a large unit for line throwing

We carry these on the tug at work which are quite a bit smaller - http://www.pwss.com/products/product...137&ProdID=206

-Alex
__________________
Flickr Photos
Youtube Videos
Alex Brown is offline   Reply With Quote
Old 03 December 2006, 09:59   #17
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,053
RIBase
Quote:
Originally Posted by Alex Brown View Post
That's quite a large unit for line throwing

We carry these on the tug at work which are quite a bit smaller - http://www.pwss.com/products/product...137&ProdID=206

-Alex
Are they refillable or one use only? I've never used one.The reason I highlighted the other one is it just needs to be charged with air-ie a lot cheaper.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 03 December 2006, 10:05   #18
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by Biggles View Post
Without seeing the proper report which is usually very detailed it would be unfair to pass judgement on anything that happened that day. This report is almost like a poster. Usually the reports are very detailed and it seems this one is missing much of the finer print.
I agree with that - but on this occassion I think this might be all we are going to get. It is no longer mentioned under the "current investigations" section. Not all incidents result in a detailed investigation/report.
__________________
Poly is offline   Reply With Quote
Old 03 December 2006, 10:21   #19
Member
 
Country: UK - England
Length: 6m +
Join Date: Sep 2004
Posts: 1,850
Quote:
Originally Posted by Richard B View Post
I think that you'll find that you're contradicting medical fact here - IIRC you are more at risk of hypothermia if you have been drinking. Where's that Manning bloke when you need him?
Actually, the man you need right now is Doug Stormforce. This came up in conversation last week while I was on one of his sailing yachts - he'd just been to a lecture with the UK's leading cold water expert Mike Tipton, (if any of you have done a First Aid Course or Sea Survival Course and seen the video Cold Water Casualty - that was Mike Tipton) who stated (and I'm sure Doug will correct me if I'm wrong) that alcohol had no effect on how likely you are to suffer hypothermia.
__________________
Jimbo is offline   Reply With Quote
Old 03 December 2006, 14:32   #20
Member
 
Country: Canada
Town: British Columbia
Make: Gemini
Length: 4m +
Engine: 40hp 2 str
Join Date: Oct 2003
Posts: 2,151
A fellow I know from grad school has become one of the worlds best known researchers on hypothermia. He has done extensive cold water immersion studies, more often than not using himself as a lab rat (he did this on Letterman once). Here is a link to 3 'in field' videos he has made with regard to cold water immersion survival. Some very useful info here.

http://www.yukonman.com/cold_water.asp
__________________
prairie tuber is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 05:02.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.