Names on Tubes

[CJWilson]

We want to enable sponsors to advertise on the tubes of our
new RIB.

The best way to make up their names and logos
would seem to be to take two pieces of material with the name
cut out in one and glue the other behind it.

RIB manufacturers use this technique with their names.


Who do you know who will do this for us? (Preferably in the UK)

[Garygee]

Give Eurocraft in Bamber Bridge near to preston a try on 1772 622856 or http://sparc.airtime.co.uk/eurocraft/

They do lots of Hyperlon stuff and I have found them very good

Regards Gary

[Storm]

There is now a flexible paint thet does not look like it has been made up using flower and water. This is the same paint that is used on the side of Zapcats to advertise there sponsers. Have a look on www.pristinemarine.co.uk under Zapcats or www.zapcat-racing.com.

[Cookee]

As another alternative we use stickers that actually stay on! The beauty of all this is that they can be taken from photos or artwork so anything is possible - email simon@bananasharkracing.com for more info