Picture one shows the underside of my upper console with the flanges that I will bolt it down with in position on their temporary brackets. You might notice the bare earth and threadbare grass behind the console. That is where my hull etc used to live
No, my boat has not been stolen
, but has gone back to Eurocraft for some additional work that I have requested. The best guess is that it will be away for two more weeks. So I am continuing to work on the console and battery holders to get them ready for when the hull comes back.
I am now putting the permanent 'flange' mountings into the upper console. The second picture shows the two front outer mounting brackets 'in the buff', having just been epoxied together. The third picture shows the brackets after having been rubbed down ready for fixing into the console. When this is done they will be clad with fibreglass and gelcoat/flowcoat. They can be seen in position in picture four.
So In the meantime I will be working on the console upper section and the battery holders - hopefully completing them for when I get the hull back; we shall see
And that's it, that is where I am currently at; no boat, and still quite a bit to do. But, I'm getting there