lifeline D ring

Daniel · 31 March 2009, 10:06

where can i get replacment stainless D - rings like this from? (i dont need the rubber bit)

JSP · 31 March 2009, 10:09

http://www.rib-shop.com/prodtype.asp...ageHistory=cat
On page 2

Nasher · 31 March 2009, 10:26

What size are they?

I have some D-rings in the garage and you'd be welcome to one if they are the right size.

Nasher

Daniel · 31 March 2009, 10:35

thanks... you don't happen to have 7 do you !!!

Nasher · 31 March 2009, 11:55

Quote:

Originally Posted by Daniel

thanks... you don't happen to have 7 do you !!!

Ah, no, just 1 or 2.

Nasher

Daniel · 01 April 2009, 10:09

nasher, faced with spending about £50 or buying you a pint for one... i think i might make do with one!

It's about 5mm diamater stainless and about 50mm long on the flat side and 35-40mm in the other direction if you happen to have anything!!

Nasher · 01 April 2009, 12:37

I'll have a look tonight.

Nasher

Daniel · 01 April 2009, 14:13

superstar

Nasher · 01 April 2009, 20:11

Quote:

Originally Posted by Daniel

It's about 5mm diamater stainless and about 50mm long on the flat side and 35-40mm in the other direction if you happen to have anything!!

Daniel

The one I've found is a little bigger.
7mm diameter bar x 55mm along the flat internal x 44mm across the 'D' Internal.

If its any good PM me an address and I'll get it posted out to you.

Nasher.

paul tilley · 02 April 2009, 09:07

ive got about 80 of them but its a bit hard cutting them ,opening them up and closing them onto your rubber mountings

Daniel · 14 April 2009, 11:44

nasher, thanks for this it's done the trick. as paul says a pain to fit, however.

i reminded my self how to eye splice, and we're all up and running with new lifelines now.

PS: beers on me if our paths ever cross

Nasher · 14 April 2009, 12:13

No worries, I'm glad it could be of some use rather than sat on the shelf in my garage.

Nasher.