Kraken Ribs - New brand

[GeoffW]

Originally Posted by krakenRibs

Pics from today at the factory...

I like the A frame visually, sets it apart from the pack. I saw some big Tornado ribs in Stockholm this year , no A frame , just a post with a radar and aerial. Looked good too.

Need to differentiate profiles, otherwise like cars , all hatchbacks look much the same !!

[krakenRibs]

Hi all, thanks for your comments. We really do appreciate your feedback.

We are going to be completing trials this weekend and I'll post videos on our Facebook page.

If you would like to see the boat in action then please like our page.

https://www.facebook.com/KrakenRibs/

Thanks,
Gaz

[jeffstevens763@g]

Gaz stick it on here to complete the thread if possible please prospective buyers will find it useful

[krakenRibs]

Originally Posted by jeffstevens763@g

Gaz stick it on here to complete the thread if possible please prospective buyers will find it useful

Ok will give it a go!

[krakenRibs]

Hope you enjoy the video, our journey so far...please forgive the video editing ☺

[jambo]

Won't load up

[krakenRibs]

Try again and refresh the thread. Worked for me after a couple of trys ☺

[Pikey Dave]

Won't work for me either.

[69cmw]

I got it working on my laptop but not my phone [emoji848]

[jambo]

Originally Posted by Pikey Dave

Won't work for me either.

I had to refresh a couple of times Dave but got it working

[MatFromPoland]

Originally Posted by jambo

I had to refresh a couple of times Dave but got it working

+1 the same a few time refresh (each time play after refresh)

But it is movie about building boat not how she performs on the Sea.

What is cockpit width ? I wonder if double console fit and 2 jockey seats.

Good luck !

[phoenixpete]

I think the boat looks great! The A- Frame is different but looks like it will be easier to keep clean than stainless due to it's shape. And I like the look of it I like the storage compartments just in front of the engine, are the fuel tanks in there or anything else?
Will be interesting to see a 7mt or bigger one.

[krakenRibs]

Originally Posted by phoenixpete

I think the boat looks great! The A- Frame is different but looks like it will be easier to keep clean than stainless due to it's shape. And I like the look of it I like the storage compartments just in front of the engine, are the fuel tanks in there or anything else?
Will be interesting to see a 7mt or bigger one.

Thanks for the feedback, the fuel tank is in the head of the console and the back storage compartments have the battery and wiring channel exit/entry point. There is also lots of storage space in here.

Thanks,
Gaz

[phoenixpete]

That’s a nice idea putting the battery in there,with fuel up front the weight distribution should be good. Did you previously work at Humber?

[diver 1]

May I ask why the transom cut out is so low?

There must be some logic in this as other manufacturers do this too..

Thanks

[69cmw]

Originally Posted by diver 1

May I ask why the transom cut out is so low?



There must be some logic in this as other manufacturers do this too..



Thanks

It looks like it's a long shaft engine, so I presume it's cut to suit that shaft size [emoji848]

[69cmw]

My mates Tornado is much the same [emoji106]

[krakenRibs]

No we are not from Humber. My dad was the owner of Tornado ��

[ShinyShoe]

Is the transom cut low, or are the sides made up higher to stop spray coming in...?

(Schrodinger's Cat)

[phoenixpete]

Originally Posted by krakenRibs

No we are not from Humber. My dad was the owner of Tornado ��

Ok. Just thought being in Hull maybe a connection.