Reply
 
Thread Tools Search this Thread
 
Old 30 November 2007, 20:01   #1
Member
 
Country: USA
Town: Negaunee, Michigan
Make: Avon SR6
Length: 6m +
Engine: 150hp Evinrude
Join Date: Oct 2007
Posts: 63
Keel Guard ??????

I purchased my first RIB and did not even get a chance to put it in the water before winter set in. So I am already planning upgrades and have a question. What is everyones opinion on "Keel Guards"?http://www.boatersworld.com/product/366975365msk.htm I see several suppliers are marketing them for RIBS.

Are they worth it?

Jeff
__________________
TB Minnow is offline   Reply With Quote
Old 30 November 2007, 21:30   #2
Member
 
Country: USA
Town: Oakland CA
Length: 3m +
Join Date: Feb 2005
Posts: 6,653
Well, I don't have one. Then again, I have an aluminum hull.

If you run in water where depth may be an issue, I'd say go for it. Likewise if you're going to be beaching your boat regularly.

If you routinely stay in reasonably deep water, and don't beach, I wouldn't bother.

This is just my opinion, though.

BTW, it's time to update your profile. The Achilles was your prior boat, I assume (they don't, as far as I know, have any RIB's.)

Good luck;

jky
__________________
jyasaki is offline   Reply With Quote
Old 01 December 2007, 05:38   #3
Member
 
Country: Other
Boat name: "can"
Make: Joker Boat
Length: 4m +
Engine: 40hp e-tec
Join Date: Feb 2007
Posts: 88
I think there are some issues with Keel guards if the rolers of your trailer are putting direct preassure on it. It is written somewhere on their website i guess.
__________________
memo is offline   Reply With Quote
Old 01 December 2007, 13:04   #4
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Fitted it to my last boat as I did a lot of beaching & it worked a treat!
Roller on my trailer did make a small depression in it, but gave no problem, just pick a worm day as it is a pig to work with cold!
__________________
Nick Hearne is offline   Reply With Quote
Old 01 December 2007, 22:58   #5
Member
 
Country: USA
Town: Negaunee, Michigan
Make: Avon SR6
Length: 6m +
Engine: 150hp Evinrude
Join Date: Oct 2007
Posts: 63
Achilles does make a RIB. I have the HB140.

I think I will put a guard on my boat for the same reasons Nick pointed out. I do plan on doing some beaching while exploring the islands in my area. I will be sure to watch the roller situation though.

Thanks all!!
__________________
TB Minnow is offline   Reply With Quote
Old 01 December 2007, 23:08   #6
Member
 
Country: UK - England
Town: Gloucestershire
Boat name: Osprey
Make: Osprey Vipermax
Length: 5m +
Engine: E-tec 300 G2
MMSI: TBC
Join Date: Dec 2006
Posts: 4,020
Ive got one and its mainly proved its worth when I have had a couple of dodgy trailer experiences whislt trying to get the boat on the trailer in a strong tide.

Good for peace of mind although a bit pricey for what it is.
__________________
Chris is offline   Reply With Quote
Old 02 December 2007, 09:25   #7
Member
 
Country: UK - England
Town: lincoln
Boat name: blazer
Make: BWM
Length: 6m +
Engine: YAMAHA 115hp
MMSI: 235059902
Join Date: Oct 2007
Posts: 115
Does anyone have any pictures of one fitted and what do you attach it with?
__________________
shirehorse is offline   Reply With Quote
Old 02 December 2007, 13:00   #8
Member
 
Country: UK - England
Town: Colchester/Clevedon
Boat name: Barracuda
Make: Porters
Length: 5m +
Engine: Tohatsu 50hp
Join Date: Oct 2006
Posts: 249
Quote:
Originally Posted by shirehorse View Post
Does anyone have any pictures of one fitted and what do you attach it with?

Here's the marketing site, which has pics. It comes with a 3M adhesive backing:

http://www.keelguard.com/keelguard.html

I like the look of the SkegPro and Scuffbuster as well.
__________________
GuyP is offline   Reply With Quote
Old 02 December 2007, 13:40   #9
Member
 
Country: USA
Town: Chicago
Make: Hurricane
Length: 4m +
Engine: 50hp Yami
Join Date: Apr 2006
Posts: 74
Try doing a search on keelguard here on RIBnet.
__________________
Bryan
BBirnie is offline   Reply With Quote
Old 02 December 2007, 18:09   #10
Member
 
Country: UK - England
Town: lincoln
Boat name: blazer
Make: BWM
Length: 6m +
Engine: YAMAHA 115hp
MMSI: 235059902
Join Date: Oct 2007
Posts: 115
Do they effect handling or cause drag?
__________________
shirehorse is offline   Reply With Quote
Old 03 December 2007, 09:36   #11
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Quote:
Originally Posted by shirehorse View Post
Do they effect handling or cause drag?
No to handling You may loose a knot or two!
__________________
Nick Hearne is offline   Reply With Quote
Old 03 December 2007, 15:03   #12
Member
 
Country: UK - England
Town: lincoln
Boat name: blazer
Make: BWM
Length: 6m +
Engine: YAMAHA 115hp
MMSI: 235059902
Join Date: Oct 2007
Posts: 115
They sound like avery good idea to me just wondering why you see so few about or have i just not noticed.
__________________
shirehorse is offline   Reply With Quote
Old 04 December 2007, 12:13   #13
CJL
Member
 
CJL's Avatar
 
Country: UK - England
Town: London/Oxford
Make: Ribcrafts
Length: 5m +
Engine: 150hp/2x115hp
MMSI: 235090215
Join Date: Oct 2002
Posts: 2,240
RIBase
Send a message via Skype™ to CJL
These are brilliant and I can't recommend them enough!

When I fitted mine there was no noticable drop in performance and the trailer does not damage the strip at all.

Mine ran down from the bow to halfway down the keel leaving the planning pad free.

Chris
Attached Thumbnails
Click image for larger version

Name:	ne3 on slip.jpg
Views:	261
Size:	76.9 KB
ID:	31622   Click image for larger version

Name:	P9050012.jpg
Views:	263
Size:	98.3 KB
ID:	31623  
__________________
www.northernexposurerescue.org.uk - A registered charity supporting sports and community events across England and Wales
Also why not check out the Ribcraft Owners Group?
CJL is offline   Reply With Quote
Old 07 December 2007, 18:24   #14
Member
 
Country: UK - Wales
Town: Cardiff
Make: Humber Destroyer 5.5
Length: 5m +
Engine: 90hp OB
Join Date: Apr 2002
Posts: 499
I've had one on mine for the last 3 years and I think it has been beneficial as I occasionally beach.

Earlier this year it started to separate from the hull but only in a small area. A quick note to the UK distributor with a couple of photos and with no hassle they honored their lifetime guarantee and a new one arrived in the post.

I know really it shouldn't have started to come off - but service was fantastic.

Mike
__________________
www.marine-rescue.co.uk
Mike B is offline   Reply With Quote
Old 07 December 2007, 21:30   #15
Member
 
Country: UK - Scotland
Make: Ribcraft 4.8
Length: 4m +
Engine: Yamaha 60hp
Join Date: May 2007
Posts: 79
We have full keel shield on our boat. It's pretty tough. No visible distortion from rollers. It's very good for the odd beaching, particularly if the transom is touching the bottom, and the wave action could lift it if you're unlucky, causing the weight of the engine to damage the keel. As far as speed loss, couldn't comment....nothing to compare it with.
Attached Thumbnails
Click image for larger version

Name:	079 - Copy.JPG
Views:	224
Size:	230.9 KB
ID:	31704  
__________________
Amber1 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 00:26.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.