Reply
 
Thread Tools Search this Thread
 
Old 28 March 2014, 14:47   #41
Member
 
neil.mccrirrick's Avatar
 
Country: UK - England
Town: Oldham
Boat name: Nemanda
Make: Aluminium
Length: 6m +
Engine: 140hp Tohatsu
MMSI: 235065639
Join Date: Jan 2008
Posts: 869
Sun pad tomorrow and then try and work out what happened with the engine. I've had the plugs out top two well black bottom one not so bad on next to the bottom better than the top two

It's either not enough air or too much oil I guess. Air filter cover is off but as there are no filters it's not that. I'm going to run it up tomorrow on muffs without the cover on the air filter

Hopefully something will be obvious or I guess it's a carb strip doh
__________________

__________________
If you don't like my opinion, I have others.
neil.mccrirrick is offline   Reply With Quote
Old 28 March 2014, 14:59   #42
RIBnet supporter
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 90Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 3,984
Quote:
Originally Posted by neil.mccrirrick View Post
Wheel bearings done. The other side had two flat spots loads of grease. I guess taking the front bearing out and greasing isn't necessarily enough. The whole lot need replacing but how frequently? I reckon doing it annually now. It's a messy job but a couple of hours and it's done
I do my bearings twice a year and take the brake cables off once a year
__________________
mick is offline   Reply With Quote
Old 28 March 2014, 15:02   #43
RIBnet supporter
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,199
sealed for life bearings, if very lucky get two seasons out of them, and that's just from the yard to the slip n back
__________________
Member of S.A.B.S. (Wirral Division)
Chris Caton is offline   Reply With Quote
Old 28 March 2014, 15:07   #44
Member
 
Country: UK - England
Town: Cheltenham/Cardiff
Boat name: KIMAR
Make: Ribcraft
Length: 5m +
Join Date: Sep 2012
Posts: 20
AA confirmed trailer covered if it breaks down up to 3500kg and max 2.3m width
__________________
Martyn57 is offline   Reply With Quote
Old 28 March 2014, 16:17   #45
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,013
Yep, they don't like salt.

Out trailer is dipped twice a year and towed once. in 5 yrs the brake drums completely collapsed this yr. must be a better system it design surely.
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 28 March 2014, 16:34   #46
RIBnet supporter
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,199
Quote:
Originally Posted by neil.mccrirrick View Post
Wheel bearings done. The other side had two flat spots loads of grease. I guess taking the front bearing out and greasing isn't necessarily enough. The whole lot need replacing but how frequently? I reckon doing it annually now. It's a messy job but a couple of hours and it's done
think I'd be stripping them down completely at the start of each season Neil, for the cost of a set of bearings it's not worth the risk, and it's much easier to do on your drive than on the hard shoulder
__________________
Member of S.A.B.S. (Wirral Division)
Chris Caton is offline   Reply With Quote
Old 28 March 2014, 16:35   #47
SPR
Trade member
 
SPR's Avatar
 
Country: UK - Scotland
Town: Central Belt of Scotland
Boat name: Puddleduck III
Make: Bombard
Length: 5m +
Engine: 50 HP
Join Date: Mar 2009
Posts: 2,066
Quote:
Originally Posted by Chris Caton View Post
think I'd be stripping them down completely at the start of each season Neil, for the cost of a set of bearings it's not worth the risk, and it's much easier to do on your drive than on the hard shoulder
+1 for this
__________________
SPRmarine / SPRtraining
RYA Training Courses & Safety Equipment Sales
SPR is offline   Reply With Quote
Old 28 March 2014, 16:37   #48
Member
 
neil.mccrirrick's Avatar
 
Country: UK - England
Town: Oldham
Boat name: Nemanda
Make: Aluminium
Length: 6m +
Engine: 140hp Tohatsu
MMSI: 235065639
Join Date: Jan 2008
Posts: 869
I agree. I reckon I've just got away with it over the years. I usually take the front bearing off, inspect for damage and re pack with grease. Not any more after seeing the shape of the rear bearing I've just taken out.

That's a full strip once a year for me and a check at six months

Sent from my iPad using Rib.net
__________________
If you don't like my opinion, I have others.
neil.mccrirrick is offline   Reply With Quote
Old 28 March 2014, 16:49   #49
RIBnet supporter
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,199
the 1st boat trailer I had didn't have any seals in the back of the bearing, which meant the bearings needed much more regular greasing and checking, I had that trailer for 20 years and only changed the bearings once, when I bought it, after that it just regular maintenance and lasted for years. these sealed for life bearings are crap, can't service them n lucky to get a full season out of them with regular towing, not my cup of tea
__________________
Member of S.A.B.S. (Wirral Division)
Chris Caton is offline   Reply With Quote
Old 28 March 2014, 16:58   #50
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,013
Obviously not serviced HIS bearings.
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	78
Size:	131.1 KB
ID:	92754  
__________________

__________________
HUMBER P4VWL is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 13:48.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.