Originally Posted by Downhilldai
They're nicely rounded, so less likely to cause injury, if someone walks on them barefoot.
As the flange on your console appears to be internal, you should be ok to use hex bolts.
Oh I see. Yes all the work will be internal, and the hex bolts are a little bit nicer to work with if I ever need to remove the console.
I'll go with the Sikaflex 292 and the nuts and bolts. That's got to hold it down. The fibreglass to finish I'll pass on for the moment, perhaps do it somewhere down the line when next I have to take it to a shop for work.
Thanks once more.