Reply
 
Thread Tools Search this Thread
 
Old 13 May 2012, 18:05   #11
red
Member
 
Country: UK - England
Town: Alton
Boat name: Seascaper
Make: Zodiac Hurricane, Ca
Length: 6m +
Engine: Diesel 170hp
Join Date: Mar 2007
Posts: 29
Quote:
Originally Posted by eyespy999
Hi there

I am new to boating, recently bought a rib which is 2.7m with a 6hp short shaft 2 stroke fitted with dolefins.

It goes quite well on the plane with just me in it but with two and even three passengers it just chugs along trying to plane.

The rib is rated to a 10hp but was wondering if a slightly bigger engine or a change of prop will do the trick?

Any advice appreciated.

Thanks
I had a similar problem with three up in a small rigid hull inflatable. I fitted a fin to the front of the boat and the extra lift got it to plane quite easily, it acts like a hydrofoil. The only problem was steerage as extra leverage was required because the boat had more straight line momentum. I corrected this by adding a tiller extension to the outboard engine's handle. The fin was bought online from a chandlers in USA - something like East Marine....
__________________

__________________
red is offline   Reply With Quote
Old 14 May 2012, 08:03   #12
Member
 
Country: UK - England
Length: under 3m
Join Date: May 2012
Posts: 48
Thanks all

I have just taken the dolefins off so I am going to give that a go some time this week if the sun comes out!

I have a short shaft engine, should I stick with that size if I was to change or would a standard do the trick? I see from the photo added Brig is almost identical to mine with a 9.8 tohatsu, the shaft looks longer though. Glad I found this website!

Cheers
__________________

__________________
eyespy999 is offline   Reply With Quote
Old 14 May 2012, 10:46   #13
Member
 
Country: UK - England
Town: Sussex
Boat name: Bombard, Y-162
Make: Aerotec 380, Y-Class
Length: 3m +
Engine: Mercury Mariner 15hp
Join Date: Jul 2010
Posts: 2,692
As Fenlander says really, to do the maths:

Circa 2m SIB + 9.8 2 stroke + 2 adults (not fatties) + 2 small kids (not fatties) = plane*

*with careful weight distribution.

Note: use fatty adults or kids or substitute 2 kids for one more adult = chug city. Ideally a lower powered 3m SIB is better with one adult + 1 kid (unless you are happy river-pootling)...

Solution = 3.5m or larger SIB + 15 to 25 hp
__________________
Max... is offline   Reply With Quote
Old 16 May 2012, 12:02   #14
Member
 
Landlockedpirate's Avatar
 
Country: UK - England
Town: St Helens
Boat name: Wine Down
Make: Maxum
Length: 8m +
Engine: Inboard
Join Date: Apr 2012
Posts: 934
Quote:
Originally Posted by eyespy999 View Post
Thanks all



I have a short shaft engine, should I stick with that size if I was to change or would a standard do the trick? I see from the photo added Brig is almost identical to mine with a 9.8 tohatsu, the shaft looks longer though. Glad I found this website!

Cheers
Short Shaft and Standard are the same size (15"), the other sizes are Long (20") and Ultralong (25").

If your boat is designed for a standard/short shaft you must stay with that size.
__________________
Landlockedpirate is offline   Reply With Quote
Old 17 May 2012, 13:35   #15
Member
 
Country: UK - England
Town: Blakeney
Boat name: Lindy
Make: Avon
Length: 3m +
Engine: Tohatsu 9.8
Join Date: Dec 2008
Posts: 98
It's the old Archimedes thing. An 8ft 6 boat with 3 adults in will sit lower in the water than a 10ft 6 boat. The engine will have to work harder to lift the smaller boat the extra distance to get it up on the plane. Because it sits lower, it will push a bigger wall of water in front at displacement speeds than the longer boat. It's got to climb over this wall to get on the plane. I've got boats of both sizes, and with the same size (9.8) engine, the bigger one is always "on the the step" earlier and with less trauma than the littly.
__________________
raymillard is offline   Reply With Quote
Old 18 May 2012, 05:45   #16
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,013
I'm guessing a 2.5m grp hulled Avon with a 4hp won't plane with one adult and a two yr old then?

Would it with a 6.6hp long shaft 4stroke?
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 18 May 2012, 06:33   #17
Member
 
Oscarguitar's Avatar
 
Country: UK - England
Town: Poole
Boat name: Half Cut
Make: Cobra 8.6
Length: 8m +
Engine: Verado 275
MMSI: 235104619
Join Date: Jun 2011
Posts: 378
I had a 2.4m Avon rib with a (fairly knackered) 5hp Yamaha 2 stroke. I could get that to plane with one if not both my sons in when they were about 6 and 8. I would think that a 4hp might just manage to get a 2.5 m up on the plane with a light load.

That 2.4m was probably the most abused boat and engine I have ever owned. My eldest asked if he could take it out on his own at about the age of 6/7. I said he could, if he could start it, thinking no chance. Big mistake, he managed to start it after 2 or 3 attempts and I dont think the throttle came off the stops for the next 3 years and the hull was mostly airborne, how was I to know he would top out at 6'4", 16st of solid muscle and have trials for the GB rowing squad! (I'm 5'10" and built like a stick!)
__________________
Oscarguitar is offline   Reply With Quote
Old 18 May 2012, 07:15   #18
Member
 
HUMBER P4VWL's Avatar
 
Country: UK - Wales
Town: N Wales Chester
Boat name: Mr Smith
Make: Humber
Length: 6m +
Join Date: Feb 2009
Posts: 5,013
Quote:
Originally Posted by Oscarguitar
I had a 2.4m Avon rib with a (fairly knackered) 5hp Yamaha 2 stroke. I could get that to plane with one if not both my sons in when they were about 6 and 8. I would think that a 4hp might just manage to get a 2.5 m up on the plane with a light load.

That 2.4m was probably the most abused boat and engine I have ever owned. My eldest asked if he could take it out on his own at about the age of 6/7. I said he could, if he could start it, thinking no chance. Big mistake, he managed to start it after 2 or 3 attempts and I dont think the throttle came off the stops for the next 3 years and the hull was mostly airborne, how was I to know he would top out at 6'4", 16st of solid muscle and have trials for the GB rowing squad! (I'm 5'10" and built like a stick!)
Was yours a hard hull?

Sounds great! I'm 5"6 14 stone, wife is 5"4 and 8 stone, daughter is negligible.

Just buying a 2.5m Avon rib (1995) and may buy a Johnson 4hp 2stroke with it. Think I'll river trial it and see if it pushes it.

Though I have access to use a 6.6hp long shaft 4stroke. May be too heavy, rated to 5hp. Ooh what to do.
__________________
HUMBER P4VWL is offline   Reply With Quote
Old 18 May 2012, 08:48   #19
Member
 
Oscarguitar's Avatar
 
Country: UK - England
Town: Poole
Boat name: Half Cut
Make: Cobra 8.6
Length: 8m +
Engine: Verado 275
MMSI: 235104619
Join Date: Jun 2011
Posts: 378
Actually ours might have been a 2.5m now I think about it. It was a proper Rib, GRP, shallow v hull and solid transom that I used as a tender to the boat I had then. Great little rib but I needed something bigger as my lads got older and didnt want to come with their parents any more in the big boat! aAn 4m Avon with a 40hp on (had two, first one was stolen while being serviced by LS Marine??) soon sorted that out!

I don't think Avon sold that many 2.5s, I never saw another one. If you can get a 5hp you will have a cracking set up, the 4hp might just be a bit underpowered for the 3 of you. (maybe give the 6.6 a go, but the long shaft will be literally a "real drag" and could negate the effect of the extra couple of horses, should be entertaining finding out though!)

It's often said that you have the most fun in the smallest boats, and we had a great time in ours.
__________________
Oscarguitar is offline   Reply With Quote
Old 18 May 2012, 11:01   #20
Member
 
Country: UK - England
Town: Devon
Make: Lomac
Length: 5m +
Engine: Honda 50
Join Date: Apr 2012
Posts: 31
You have to consider that a 2.7m boat is really a tender, irrespective of design category, and is not intended to be used as a planing sports boat.

Also, many 6hp's are single cyl, and do not have the torque required to get on the plane quickly.

The displacement or effective weight in the water of this boat would cause too much drag to plane efficiently, irresepctive of engine size.

If you can get a SIB or RIB above about 3.2m, with at least a 9.9, go for it! Otherwise, boating isn't going to be much fun for more than 1 person.

As suggested, the idea of shifting weight and using a tiller extension is much more effective that Doel fins, and will reduce drag if you are not in a position to change.
__________________

__________________
Redrock is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:29.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.