Cheers guys for the feedback.
Basically I'm looking for a wee bit more room than my 3.5m Honwave.
Still want to be able to dry launch and recover it from a trailer and want to be able to pull it out of the water (on launch wheels) when beach hopping.
Therefore i couldn't go much heavier than the Honwave.
Both these Ribs are more or less the same weight as my Honwave.
I initially thought of going down the polyethylene boat route but decided against it as I would need to get a long shaft engine and they are wet launch only from a trailer IMO.
I wanted a bit more speed for pulling the kids on rings than my Honwave could offer with a 20hp Tohatsu 4 stroke.
Didn't want to go much bigger or heavier than a 20hp engine due to upgrade cost and weight.
So it basically boiled down to wanting something a wee bit bigger, no heavier than my Honwave, better performing with the same sized engine.
A tall ask I though - but I think both these boats will fulfill my requirements without spending a fortune.
I can use my S/S Tohatsu 20hp 4 stroke on tiller
Shiny shoe - I'm going to have another look at the X Pro as I made a boo boo when I looked at it first time around.
Looked at the weight of one with a console and a few other add ons.