Flip Camera - Page 2

RRIBS · 02 July 2010, 08:32

Thought your filming was really good, nice and clear. Well edited and good choice of music too. Looking to add the same, considering arear view as well, so could possibly split screen. Gret job, thanks.

Brian · 02 July 2010, 16:58

Dave P.,
Certainly, it will be my pleasure.
I will tell you about the mount when I post the picture. OK Tomorrow??

Dave P · 02 July 2010, 18:54

Yes thats fine, whenever you can, no rush just interested to see how and where its mounted, to give you such great forward views.
Dave.

jambo · 02 July 2010, 20:50

Quote:

Originally Posted by Dave P

Yes thats fine, whenever you can, no rush just interested to see how and where its mounted, to give you such great forward views.
Dave.

AS a Flip owner I am interested too!

J

Brian · 03 July 2010, 11:02

OK, here is the answer to your questions.
Pic 1
Drill a small hole through the horizontal plate on the A-frame. If you haven't got a horizontal plate, but do have a vertical plate, drill through that. Then adjust the lens so that it takes pictures from the correct angle. See the website for this rather clever bit of technology.
Pic 2
Put a small engineering bolt/screw through the hole from the underside. This is not supplied. Making sure the bolt/screw fits into the bottom of the camera, of course.
Pic 3
Fit on rubberised pad by making a hole in it. This is one of 2/3 diferent sized pads supplied.
Pic 4
Camera then screwed down (not too tight!!)-facing forward.
Pic 5
Ditto- facing sideways

Brian · 03 July 2010, 11:23

Dave P.
The website: Drift Innovation X170 Action Camera
gives a photo of the whole range of mounting options supplied with the camera. Helmet mounting, handlebar mounting etc. I suggest you look at the photo of all the supplied options first.

A thought. If you have an A-frame without any flat vertical or horizontal surfaces and you have an A-frame with 1" or less diameter, you could probably fit a combination of the handlebar mounts and get a steady picture. The "film" does seem to be amazingly steady when displayed on your computer screen. Dont worry if your A-frame is not truly vertical either as the mounting option lets you adjust for non-vertical mounting.

I do not recommend you use any of the velcro strapping as the vibration of your boat would soon unseat it.

colblinky · 03 July 2010, 15:22

Ive been looking myself if you want a good waterproof cam corder that can be handheld this cant be beaten on price or quality capable of 5mb stills as well as being full 1080p it is also fully waterproof immersion to 3m the ZX1 is not waterproof this can also be mounted to your a frame as it has a standard tripod screw with it to be used with a bar clamp http://www.fastfilms.co.uk/fixed-camera-mounts.php cost 30 quid

Hightower · 03 July 2010, 16:51

thought this might interest some of you: http://www.hotukdeals.com/item/70868...lip-ultra-64-9

C2 RIBS · 05 July 2010, 07:17

Quote:

Originally Posted by longjohn

I wanted something similar a while back and and narrowed it down to the
Panasonic DMC FT2 or the Kodak Zx1
Both waterproof so ideal for a rib.
I ended up getting the Panasonic as it was a little more versatile (and more expensive) - very happy with it - takes great HD videos and even better stills.

http://www.ukdigital.co.uk/panasonic...ft2-camera.htm
http://shop.kodak.co.uk/store/ekcons...ctID.147426200

Kodak phone at a good price?
http://www.amazon.co.uk/dp/B001SN72T...outThisProduct