Thread Tools Search this Thread
Old 10 April 2010, 07:07   #1
Country: USA
Town: Oregon
Boat name: scuba-doo
Make: Avon 5.4SR
Length: 5m +
Engine: 90hp yami 2str
MMSI: 338086604
Join Date: Oct 2008
Posts: 111
filling screw holes

I moved the consol and seat on my 5.4 SR and was wondering the best way to fill the old holes. With it being fiberglass I should not have a problem with dry rot from the bottom side even with the wet hull correct? Just fill with 3m 4200 from the topside and shove some down with a toothpick and then fill to the top then sand smooth after drying?

thanks stan

no excuses is offline   Reply With Quote
Old 12 April 2010, 01:16   #2
Country: USA
Town: Oakland CA
Length: 3m +
Join Date: Feb 2005
Posts: 6,618
If you can get to the underside, masking tape the bottom, then fill the holes with epoxy. sand or grind flush when cured.

jyasaki is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 22:17.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.