Reply
 
Thread Tools Search this Thread
 
Old 08 August 2018, 05:42   #61
Member
 
Country: Finland
Town: Helsinki
Boat name: SR 5.4
Make: Avon
Length: 4m +
Engine: Toh1 3,5 Yam 90/2S
Join Date: Oct 2009
Posts: 908
He wants 3500 for the hull, the problem is the potential amount of work. The strakes on the tubes alone need plenty of work, transom was maybe not weak yet but had water damages as had already some variations in thickness(easy to spot when comparing to the aluminium profile on top on transom). Yes all doable, but outdoor would take forever with the spare time i have for now. Maybe not a bad deal for the right buyer with plenty of time.
__________________

__________________
fun on a boat is inversely proportional to size...sort of anyway
C-NUMB is offline   Reply With Quote
Old 08 August 2018, 06:56   #62
Member
 
Country: Finland
Town: Helsinki
Boat name: Harmaakarhu
Make: Avon SR6
Length: 6m +
Engine: Yamaha F150
Join Date: Feb 2009
Posts: 75
Luckily there is no wood in the transom. It's all foam and fiberglass. But 3.5k€ is abit too much for the hull in that mystery condition. If there would be room to bargain the whole thing a bit down and then sell the engines it might be a deal.
__________________

__________________
Stresspill is offline   Reply With Quote
Old 08 August 2018, 07:29   #63
Member
 
Country: Finland
Town: Helsinki
Boat name: SR 5.4
Make: Avon
Length: 4m +
Engine: Toh1 3,5 Yam 90/2S
Join Date: Oct 2009
Posts: 908
That's good information thanks, maybe there was only some minor delamination on the transom then.

Have You had Yours weighed? Just realized my trailer is only good for 840 kg on top of its own weight(axle is 1300 kg though). Little tight i guess....
__________________
fun on a boat is inversely proportional to size...sort of anyway
C-NUMB is offline   Reply With Quote
Old 08 August 2018, 07:40   #64
Member
 
Country: Finland
Town: Helsinki
Boat name: Harmaakarhu
Make: Avon SR6
Length: 6m +
Engine: Yamaha F150
Join Date: Feb 2009
Posts: 75
No I haven't weighted it but I recon that mine is also on the borderline when it comes to trailer capacity. I believe that it's about 950kg. And I have a trailer that has max capacity of 1000kg
__________________
Stresspill is offline   Reply With Quote
Old 31 May 2019, 07:57   #65
Member
 
Country: Finland
Town: Helsinki
Boat name: Harmaakarhu
Make: Avon SR6
Length: 6m +
Engine: Yamaha F150
Join Date: Feb 2009
Posts: 75
Bow locker progress

Finally I have started the bow locker project. Also add a carpet to the floor, I found it from dumpster so quite a bargain and not concerned about the longevity. Some photos attached from the progress so far.
Attached Thumbnails
Click image for larger version

Name:	20190520_184248.jpg
Views:	102
Size:	274.2 KB
ID:	129556   Click image for larger version

Name:	20190530_112634.jpg
Views:	105
Size:	67.2 KB
ID:	129557   Click image for larger version

Name:	20190530_120102.jpg
Views:	100
Size:	135.2 KB
ID:	129558   Click image for larger version

Name:	20190530_130809.jpg
Views:	101
Size:	109.5 KB
ID:	129559   Click image for larger version

Name:	20190530_135106.jpg
Views:	104
Size:	140.0 KB
ID:	129560  

__________________
Stresspill is offline   Reply With Quote
Old 31 May 2019, 08:02   #66
Member
 
Country: Finland
Town: Helsinki
Boat name: Harmaakarhu
Make: Avon SR6
Length: 6m +
Engine: Yamaha F150
Join Date: Feb 2009
Posts: 75
More pics

Laminated 2-3 coats with 450g. chopped strand and polyester resin. Will continue with pvc-foam core and biaxial 444g. cloth. And going to switch to epoxy for the inner layer and the front side of the box. I had to use polyester due to temperature reasons when laminating outdoors.
Attached Thumbnails
Click image for larger version

Name:	20190530_165841.jpg
Views:	95
Size:	156.9 KB
ID:	129561   Click image for larger version

Name:	20190530_165846.jpg
Views:	96
Size:	212.0 KB
ID:	129562   Click image for larger version

Name:	20190530_171902.jpg
Views:	93
Size:	204.9 KB
ID:	129563  
__________________
Stresspill is offline   Reply With Quote
Old 31 May 2019, 12:49   #67
Member
 
Country: Finland
Town: Helsinki
Boat name: Harmaakarhu
Make: Avon SR6
Length: 6m +
Engine: Yamaha F150
Join Date: Feb 2009
Posts: 75
And off it came

The plug came off quite easily, so now it's time to plan how the rest of it looks
Attached Thumbnails
Click image for larger version

Name:	20190531_185823.jpg
Views:	90
Size:	105.0 KB
ID:	129574   Click image for larger version

Name:	20190531_185821.jpg
Views:	86
Size:	185.0 KB
ID:	129575   Click image for larger version

Name:	20190531_191005.jpg
Views:	90
Size:	197.0 KB
ID:	129576   Click image for larger version

Name:	20190531_191017.jpg
Views:	89
Size:	189.7 KB
ID:	129577   Click image for larger version

Name:	20190531_191045.jpg
Views:	92
Size:	148.2 KB
ID:	129578  

__________________
Stresspill is offline   Reply With Quote
Old 31 May 2019, 15:04   #68
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Mercury
Length: 3m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 5,323
SP great so far I'm just wondering how are you going to prevent rub on the tubes are you planning to set it aft a little to give a gap between tube and locker?
__________________
jeffstevens763@g is offline   Reply With Quote
Old 01 June 2019, 01:39   #69
Member
 
Country: Finland
Town: Helsinki
Boat name: Harmaakarhu
Make: Avon SR6
Length: 6m +
Engine: Yamaha F150
Join Date: Feb 2009
Posts: 75
Don't see a problem with chafing, it's a snug fit and therefore the pressure should be equal on all surfaces. It will be easy to take off and will keep an eye to it. If I'll see some spots wearing I can just glue on a wearing patch.
__________________
Stresspill is offline   Reply With Quote
Old 01 June 2019, 03:28   #70
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Mercury
Length: 3m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 5,323
It will chafe for sure the tubes move independantly from the hull some neoprene glued on will help though
__________________

__________________
jeffstevens763@g is offline   Reply With Quote
Reply

Tags
build, refurbish, searider, sr6

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 08:58.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.