Reply
 
Thread Tools Search this Thread
 
Old 18 August 2009, 08:36   #1
Member
 
Country: Belgium
Town: Ghent Belgium
Boat name: Quickflash
Make: Scorpion 9,75 m
Length: 9m +
Engine: Volvo D6 370Hp
MMSI: 20519774700
Join Date: Sep 2007
Posts: 70
Dry-Suit

Hi,

I would appreciate some advice on dry-suits. I am planning a few cross-channel trips and do not have a dry suit. What are good manufacturers & types , where could I buy it at a reasonable price and what do you wear underneath the dry-suit ?

I hear that Musto & HH are good, but also pretty pricy.

Thanks
__________________
Quickflash is offline   Reply With Quote
Old 18 August 2009, 10:32   #2
Member
 
Leapy's Avatar
 
Country: UK - England
Town: Sheepy Parva
Boat name: Sadly Sold
Length: no boat
Join Date: Sep 2008
Posts: 1,731
Quote:
Originally Posted by Quickflash View Post
Hi,

I would appreciate some advice on dry-suits. I am planning a few cross-channel trips and do not have a dry suit. What are good manufacturers & types , where could I buy it at a reasonable price and what do you wear underneath the dry-suit ?

I hear that Musto & HH are good, but also pretty pricy.

Thanks
We bought Crewsaver from WetSuitOutlet...good suits and good service. It took a couple of attempts to find the right sizes.

You'll get all sorts of advice on front and rear zips...best bet is try on both and make your own mind up. There are pros and cons for both.

Underneath, weather dependant, it's either summer casuals if it's mild - shorts and tee shirt - or 'wooly bear' fleece when it's cold
__________________
Leapy is offline   Reply With Quote
Old 18 August 2009, 11:40   #3
Member
 
Country: UK - England
Town: birmingham
Boat name: dawnraid
Make: ribcraft
Length: 6m +
Engine: ob 200hp
Join Date: Jan 2008
Posts: 107
dry suits

go on to the webb & insert diver mag there are dozens of manufactures . but some well known ones are northan diver, beaver,allso try www.beepbluedive.com they all sell undersuits
having been a diver for 30 years & with ribs for longer i would go for memdrain type dont forget to tell the supplyers you dont wont valves & therefor should be cheaper
you may prefer to have internal bracers
dont forget the talcumpowder & washing up liquid for seals
__________________
paul holder is offline   Reply With Quote
Old 18 August 2009, 12:43   #4
Member
 
Country: UK - England
Town: North Lincolnshire
Boat name: Mary Olwen
Make: Humber
Length: 6m +
Engine: OB, Petrol, 140HP
Join Date: Mar 2007
Posts: 150
We've bought a few Crewsaver suits too, no problems so far.
Light, breathable, neoprene collar/cuffs, front zip. IIRC they were about £175 each which included the 'wooly bear' undersuit. You'll need boots though as they only come with latex socks.
I'd echo leapy's comments about fit - I'm 6'2" and built like a racing snake and the medium suit fits me best. The XXL (which is recommended for over 6') is heeooouuuge on me. Best to try some on to find the right size for you.
__________________
Dry_Doc is offline   Reply With Quote
Old 18 August 2009, 12:52   #5
Member
 
Country: Belgium
Town: Ghent Belgium
Boat name: Quickflash
Make: Scorpion 9,75 m
Length: 9m +
Engine: Volvo D6 370Hp
MMSI: 20519774700
Join Date: Sep 2007
Posts: 70
Thanks for the tips, I looked at the internet and saw that they offered drysuits with either latex or neoprene cuffs. What's the difference ?
__________________
Quickflash is offline   Reply With Quote
Old 18 August 2009, 12:55   #6
SPR
Member
 
SPR's Avatar
 
Country: UK - Scotland
Town: Central Belt of Scotland
Boat name: Puddleduck III
Make: Bombard
Length: 5m +
Engine: 50 HP
Join Date: Mar 2009
Posts: 2,066
I bought a made to measure suit from http://www.hammond-drysuits.co.uk/

Very good, made to my specs and sizes and very good service. I had short lead time because i needed it quickly. They also do off the shelf products, unlike a few made to measures I believe all there suits are hand made in UK unlike a few other companies who bu in half completed suits then put legs and artms cuffs.

I also got a Bear Suit, made to measure too, am 6 foot 1 and 24 Stone, hence the custom made route!

S.
__________________
SPR is offline   Reply With Quote
Old 18 August 2009, 12:57   #7
SPR
Member
 
SPR's Avatar
 
Country: UK - Scotland
Town: Central Belt of Scotland
Boat name: Puddleduck III
Make: Bombard
Length: 5m +
Engine: 50 HP
Join Date: Mar 2009
Posts: 2,066
Quote:
Originally Posted by Quickflash View Post
Thanks for the tips, I looked at the internet and saw that they offered drysuits with either latex or neoprene cuffs. What's the difference ?
I went for neoprine neckseal and cuffs, alot more confortable than latex but usally more expensive.

Think down side is you really need them to fit! The latex you can usally cut with sharp knife to size.

S.
__________________
SPR is offline   Reply With Quote
Old 18 August 2009, 13:08   #8
Member
 
Country: UK - England
Town: West Sussex
Length: no boat
Join Date: Oct 2002
Posts: 3,872
have a look at

http://www.typhoon-int.co.uk/

I find the Typhoon WOSS a very good dry suit
__________________
Andre
Andre is offline   Reply With Quote
Old 18 August 2009, 14:02   #9
Member
 
Leapy's Avatar
 
Country: UK - England
Town: Sheepy Parva
Boat name: Sadly Sold
Length: no boat
Join Date: Sep 2008
Posts: 1,731
Quote:
Originally Posted by Quickflash View Post
Thanks for the tips, I looked at the internet and saw that they offered drysuits with either latex or neoprene cuffs. What's the difference ?
My experience is that latex is thin and very flexible but degrades with exposure to UV, although can buy 'sun cream for latex' from drysuit sellers. Latex can be easily trimmed with a pair of scissors to suit your own size, but equally, the socks can be relatively easily holed if you walk about on the rough stuff: so don't walk about on the rough stuff! They can be replaced.

Neoprene is more resilient and my sense is that it's replacing latex in the market.

Cue others now to talk about suits with integral boots. I have no experience of these.

If you go for seperate boots, again watch your sizes. I take a size 11 shoe but a size 14 Crewsaver boot The consolation is that if the outboard fails I can flipper home
__________________
Leapy is offline   Reply With Quote
Old 18 August 2009, 14:13   #10
SPR
Member
 
SPR's Avatar
 
Country: UK - Scotland
Town: Central Belt of Scotland
Boat name: Puddleduck III
Make: Bombard
Length: 5m +
Engine: 50 HP
Join Date: Mar 2009
Posts: 2,066
Latex socks + Boots over them i was not success full withthem, maybe i should used trainers instead of cut down wellies.....

I got moulded boots on my suit and its so easy to slide in to and out....no talc or anything, use full if i just want waidders depth, slips on in seconds.

RNLI used moulded boots on ther ILB suits that happen to be typhoon.

My first dry suit was a Henry Llyod, with rubber socks and and seals.

Now waits on debate - Back seal or front seal.......i now got back seal with comfort zip on front! Easier to put on, but needs second person to pull shut....

S.
__________________
SPR is offline   Reply With Quote
Old 18 August 2009, 14:32   #11
Member
 
Country: UK - Wales
Town: Southampton
Boat name: DynaMoHumm/ SRV/deja
Make: Avon8.4, 5.4 & 4.777
Length: 8m +
Engine: Cat3126 Yam 90 &70
MMSI: 42
Join Date: Dec 2003
Posts: 6,562
Don't overlook products by Mullion and fladden. I use a fladden suit and it;s tough warm watrproof and has a seamans price tag as opposed to a yachties price tag
__________________
Here it comes again, I don't stand a chance
Soul possession, Got me in a trance
Pullin' me back to you - Deja Voodoo
Rogue Wave is offline   Reply With Quote
Old 18 August 2009, 21:30   #12
Member
 
Country: UK - England
Town: N. Devon
Boat name: (Not Another) Nutkin
Make: Highfield
Length: 6m +
Engine: Outboard, Honda 135
MMSI: 232036183
Join Date: Dec 2008
Posts: 2,015
RIBase
I use a Polar Bear dry suit www.polarbears.co.uk

My boat suit has built in boots and latex seals. When the need replacing I'll be putting neo ones on as they are more comfertable when worn for long periods and not totally submerged.
__________________
Andy

Bude Dive Club - www.budediveclub.co.uk
GAFIRS - www.gafirs.org.uk
treerat is offline   Reply With Quote
Old 19 August 2009, 13:59   #13
Member
 
Country: Belgium
Town: Ghent Belgium
Boat name: Quickflash
Make: Scorpion 9,75 m
Length: 9m +
Engine: Volvo D6 370Hp
MMSI: 20519774700
Join Date: Sep 2007
Posts: 70
What about Musto or HH ? Are they worth the extra money ? What is so great about them that they ask double the price of "regular" dry-suits ?

Most of the dry-suits that I see are specifically for diving; which dry-suit is perfect for on a RIB?, where the whole idea is not to go diving but where you can get seriously wet.
__________________
Quickflash is offline   Reply With Quote
Old 19 August 2009, 14:29   #14
Member
 
Country: UK - Wales
Town: Southampton
Boat name: DynaMoHumm/ SRV/deja
Make: Avon8.4, 5.4 & 4.777
Length: 8m +
Engine: Cat3126 Yam 90 &70
MMSI: 42
Join Date: Dec 2003
Posts: 6,562
You get more respect fromyour peers when you where a musto or HH drysuit.

when working offshore we have to wear these. http://www.typhoon-int.co.uk/product...racer_ezeedon/

Any other work I wear this http://www.cheaplifejackets.co.uk/on...-pr-16165.html cos it's fabber

whatever you get make sure it'sgotta comfort zip or front opening
__________________
Here it comes again, I don't stand a chance
Soul possession, Got me in a trance
Pullin' me back to you - Deja Voodoo
Rogue Wave is offline   Reply With Quote
Old 19 August 2009, 19:04   #15
SPR
Member
 
SPR's Avatar
 
Country: UK - Scotland
Town: Central Belt of Scotland
Boat name: Puddleduck III
Make: Bombard
Length: 5m +
Engine: 50 HP
Join Date: Mar 2009
Posts: 2,066
If you got back zip on drysuit;

get somebody to open the back zip and pass a bottle down for you to pee in.......

S.
__________________
SPR is offline   Reply With Quote
Old 19 August 2009, 19:31   #16
Member
 
Leapy's Avatar
 
Country: UK - England
Town: Sheepy Parva
Boat name: Sadly Sold
Length: no boat
Join Date: Sep 2008
Posts: 1,731
Quote:
Originally Posted by SPR View Post
If you got back zip on drysuit...
...have a couple of, er, 'dry' runs It's not as difficult as some might have you believe. You just need to work out a process

My experience is that it's far, far easier than needing a pee in a traffic jam on the A30 in Cornwall last weekend. Eventually, a few girls just lost the will to hang on to their dignity. The blokes just stood there talking and laughing and peeing up the wheels of their cars
__________________
Leapy is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 16:29.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.