Reply
 
Thread Tools Search this Thread
 
Old 17 August 2019, 08:19   #1
Member
 
Country: UK - England
Town: South East
Make: Cobra
Length: 7m +
Join Date: Sep 2018
Posts: 10
‘Dockline’ - to splice or not to splice...

...that is the question!

Looking to replace the lines on our 7.5 for general mooring (bow/ stern and springs).

Thinking 12mm dockline and like the look of the braided stuff, feels nice to work with. It seems to be available all over the place with a pre spliced loop on one end.

Question - what is really best/ what are people’s thoughts? Is it better without?

Originally I’d always thought a loop would be practical and safe for use on fitted cleats, however on a recent sailing trip the skipper was dead against that idea and insisted on a bowline straight through the cleat!?

Thoughts/ recommendations gratefully received!
__________________
Hamble Don is offline   Reply With Quote
Old 17 August 2019, 08:45   #2
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,861
RIBase
Mine have a soft loop spliced in one end & free at the other. The spliced loop goes through the cleat on my A frame.
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 17 August 2019, 09:32   #3
Member
 
Country: UK - England
Town: Plymouth
Boat name: HAPPY NOW
Make: Cobra
Length: 8m +
Engine: Mercury 350
Join Date: May 2014
Posts: 204
Why would you not have both?
__________________
Sutty is offline   Reply With Quote
Old 17 August 2019, 09:43   #4
Member
 
lakelandterrier's Avatar
 
Country: UK - England
Town: Gloucester
Boat name: Lunasea
Make: Ribcraft
Length: 5m +
Engine: Suzi 140
MMSI: 232005050
Join Date: Sep 2007
Posts: 1,976
I put an eye-splice in one end of my mooring lines and open the other.

Only benefit I can think of in tying a bowline through a cleat v. looping through an eye-splice is that technically putting an eye-splice in a line reduces its breaking strength. However mooring lines should be way strong enough.

Quicker to the pass line through eye-splice and not reliant on some bod not tying the bowline properly!

I think your wafi skipper is either rather anal or had had some bad experience.
__________________
Member of the Macmillan Round the Isle of Wight Club
lakelandterrier is offline   Reply With Quote
Old 17 August 2019, 11:52   #5
Member
 
Country: UK - England
Length: 3m +
Join Date: Sep 2008
Posts: 2,757
Was he tieing the bow line through the cleat? Or using it the same way?

Pretty sure a bowline also reduces rope strength.

But! A bowline moves. So you move areas of friction.

If you are going to tie... Why not just cleat it?
__________________
ShinyShoe is offline   Reply With Quote
Old 17 August 2019, 19:08   #6
Member
 
Country: Other
Town: Stanley, Falkland Is
Boat name: Seawolf
Make: Osprey Vipermax 5.8
Length: 5m +
Engine: Etec 150
Join Date: Mar 2006
Posts: 3,726
I make up my own 3 strand lines from bulk rope and I usually have 1 end with a spliced eye and 1 end with a bowline eye so I can take it out if I need to.


The commercial workboats here mainly have specified moorings and made-to-length docklines which are spliced through the cleats bolted on the pontoons. Apart from reducing the chances of it coming adrift accidentally, it also reduces the chances of some little prick nicking them or flicking them off as a laugh...
__________________
A Boat is a hole in the water, surrounded by fibreglass, into which you throw money...

Sent from my Computer, using a keyboard and mouse
BogMonster is offline   Reply With Quote
Old 17 August 2019, 19:19   #7
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Excel 435
Length: 4m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 7,441
RIBase
[Pretty sure a bowline also reduces rope strength.] dont climbers use bowline.
if its spliced its semi fixed if knotted can be use quickly for other purposes if required
__________________
jeffstevens763@g is offline   Reply With Quote
Old 17 August 2019, 19:44   #8
Member
 
Highland Haggis's Avatar
 
Country: UK - Scotland
Town: Edinburgh
Boat name: Excel Chalanger
Make: Highfield 380 Excel
Length: 4m +
Engine: 25 Yamaha 25Suzuki
MMSI: 235919522
Join Date: Oct 2014
Posts: 601
I have both spliced and crown knot back splice it all depends on what you want and the ease of use to ur Application go with what feels better with you.
__________________
Highland Haggis is offline   Reply With Quote
Old 17 August 2019, 20:21   #9
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by jeffstevens763@g View Post
[Pretty sure a bowline also reduces rope strength.] dont climbers use bowline.

They do, but every knot is weaker than the rope itself. A bowline is pretty strong but only about 65% of the rope itself. Theoretically I think a splice can be very close to 100%. Climbers don’t generally use splices because they aren’t as adaptable - very rarely is gear or rope failure the cause of a climbing accident.
__________________
Poly is offline   Reply With Quote
Old 18 August 2019, 11:01   #10
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Excel 435
Length: 4m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 7,441
RIBase
Quote:
Originally Posted by Poly View Post
They do, but every knot is weaker than the rope itself. A bowline is pretty strong but only about 65% of the rope itself. Theoretically I think a splice can be very close to 100%. Climbers don’t generally use splices because they aren’t as adaptable - very rarely is gear or rope failure the cause of a climbing accident.
yep your right 20-40% loss some knots 65%, splices can attain 100%, climbing ropes are dynamic stretching with shock load i use it on my boat we throw it away even if not used at work, i think every 5 years less if used heavily but its load rating is a lot more that needed, 5 times i think not sure if tieing use stronger rope P for plenty IMO
__________________
jeffstevens763@g is offline   Reply With Quote
Old 20 August 2019, 21:47   #11
Member
 
Country: UK - Scotland
Length: 6m +
Join Date: Mar 2019
Posts: 59
Quote:
Originally Posted by jeffstevens763@g View Post
dont climbers use bowline.
Only the ones who climb in tweeds and boots with tricouni nails.

Rethreaded figure 8 is the modern standard. Easier to tie and to check on your partner.
__________________
Frar is offline   Reply With Quote
Old 21 August 2019, 07:52   #12
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by Frar View Post



Rethreaded figure 8 is the modern standard. Easier to tie and to check on your partner.


It is for tying to a harness, but I would still use a bowline for tying off anchors on static objects like big trees. I may be out of date* but have seen plenty of others doing likewise and never seen someone climb in tweed!

*almost certainly as my newest harness is probably due for retirement.
__________________
Poly is offline   Reply With Quote
Old 21 August 2019, 08:33   #13
Member
 
Country: UK - England
Town: Retford
Boat name: Spy-sea-one
Make: Excel 435
Length: 4m +
Engine: Suzuki Outboard/25/4
Join Date: Oct 2011
Posts: 7,441
RIBase
at 65 it was tweed in my day i'll leave dangling off a piece of string to spiders now days
__________________
jeffstevens763@g is offline   Reply With Quote
Old 21 August 2019, 10:06   #14
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,053
RIBase
Realistically, how many of you have snapped a dockline with a knot in it on something as light as a rib?

I know technically you reduce the strength, but you'll be damaging the boat way before that knot breaks unless you're silly enough to be using blue polyprop.
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 21 August 2019, 21:36   #15
Member
 
lakelandterrier's Avatar
 
Country: UK - England
Town: Gloucester
Boat name: Lunasea
Make: Ribcraft
Length: 5m +
Engine: Suzi 140
MMSI: 232005050
Join Date: Sep 2007
Posts: 1,976
I'd be inclined to focus on size - for me min 14mm- line and qulity than whether to tie at both ends or splice one end. For my boat lines with eye splice round the Aframe + the painter workshort term. Springs, simple line tied / cleated at each end
__________________
Member of the Macmillan Round the Isle of Wight Club
lakelandterrier is offline   Reply With Quote
Old 21 August 2019, 21:42   #16
Member
 
Country: UK - Scotland
Length: 6m +
Join Date: Mar 2019
Posts: 59
Quote:
Originally Posted by Poly View Post
It is for tying to a harness, but I would still use a bowline for tying off anchors on static objects like big trees.
Good point Pays to know a good few knots or have plenty of slings and crabs...

As for on the boat. All my lines except the painter have a spliced loop in one end. I do like splicing...
__________________
Frar is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 09:54.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.