Go Back   RIBnet Forums > RIB talk > RIBs & ribbing
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 21 September 2004, 18:56   #1
Member
 
Country: Other
Make: Ribtec
Length: 7m +
Engine: Yamaha F225
Join Date: May 2002
Posts: 411
Comfort Zip - Horizontal or Vertical

Whilst putting on my Typhoon Alpha drysuit the other week, I tried to help one of the socks over my heel, only for a clutch of rubber to come away between my thumb and forefinger, thereby leaving a hole the size of an apple in the heel.

I phoned Typhoon today who informed that it was not covered under any warranty and the replacement cost would be £19 per sock. I figured I'd get them both done at the same time, in case the other sock was also about to perish.

I asked them to quote for fitting a comfort zip at the same time, for which they quoted £ 50, but asked if I wanted it to be vertical or horizontal. OK, leaving aside the Chinese gags, what is the advantage of having a horizontal zip ? Is it something to do with the size of the seals ?

Also, with delivery costs of £14 there and back, that brings the total cost to £ 102, which seems a bit steep. At this price, is it worth repairing; it is perfectly serviceable apart from the hole in the sock, if a little difficult to get in and out of. Is there anything else I should be looking at ?
__________________
Bittentobuggery is offline   Reply With Quote
Old 21 September 2004, 19:00   #2
Member
 
ashbypower's Avatar
 
Country: UK - England
Town: Salisbury
Boat name: Blue C
Make: XS 600
Length: 6m +
Engine: 125hp Opti
MMSI: 235082826/235909566
Join Date: Jan 2004
Posts: 1,439
Hi, If it's not covered by warranty, then I'd suggest that you take it along to a dive Shop. Most cover repairs and MoD's. Worth a try

Brian
__________________
Brian C
APS Marine Centre
ashbypower is offline   Reply With Quote
Old 21 September 2004, 19:13   #3
Administrator
 
John Kennett's Avatar
 
Country: UK - England
Town: Brighton
Length: 3m +
Join Date: May 2000
Posts: 7,106
Quote:
Originally Posted by Whiteshoes
I asked them to quote for fitting a comfort zip at the same time, for which they quoted £ 50, but asked if I wanted it to be vertical or horizontal. OK, leaving aside the Chinese gags, what is the advantage of having a horizontal zip ? Is it something to do with the size of the seals ?
I don't think I've ever seen a vertical one. Horizontal works fine. Don't know if it makes much difference either way . . .
Quote:
At this price, is it worth repairing; it is perfectly serviceable apart from the hole in the sock, if a little difficult to get in and out of. Is there anything else I should be looking at ?
Get boots instead of socks. In fact Typhoon still have a pair of my wellies I sent them about five years ago for a drysuit they never made me . . .

John
__________________
John Kennett is offline   Reply With Quote
Old 21 September 2004, 19:52   #4
Member
 
Country: UK - Wales
Town: Southampton
Boat name: DynaMoHumm/ SRV/deja
Make: Avon8.4, 5.4 & 4.777
Length: 8m +
Engine: Cat3126 Yam 90 &70
MMSI: 42
Join Date: Dec 2003
Posts: 6,562
I think you'll find the horizontal comfort zip is only normally fitted to the drysuits sent out to the Asian market
__________________
Here it comes again, I don't stand a chance
Soul possession, Got me in a trance
Pullin' me back to you - Deja Voodoo
Rogue Wave is offline   Reply With Quote
Old 21 September 2004, 19:57   #5
Member
 
ashbypower's Avatar
 
Country: UK - England
Town: Salisbury
Boat name: Blue C
Make: XS 600
Length: 6m +
Engine: 125hp Opti
MMSI: 235082826/235909566
Join Date: Jan 2004
Posts: 1,439
[QUOTE=Rogue Wave] I think you'll find the horizontal comfort zip is only normally fitted to the drysuits sent out to the Asian market [/QUOTE


__________________
Brian C
APS Marine Centre
ashbypower is offline   Reply With Quote
Old 21 September 2004, 21:01   #6
Member
 
Country: UK - England
Town: Nutbourne
Boat name: Renegade
Make: Porter
Length: 6m +
Engine: 140 Tohatsu
MMSI: 235022904
Join Date: Dec 2003
Posts: 1,195
Cap'n Shoes

Andark at Swanwick will do it for you. They resealed my Typhoon suit, neck, wrists, socks and all. £50 as far as I remember.
__________________
Mark H
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools" Douglas Adams
Mark Halliday is offline   Reply With Quote
Old 21 September 2004, 21:07   #7
Member
 
Nasher's Avatar
 
Country: Other
Town: Principalite d'Chaos
Boat name: The Nashers Revenge!
Make: Windsor Brothers
Length: 6m +
Engine: Optimax 225
MMSI: "Mmmmm SI" she said!
Join Date: Jan 2004
Posts: 4,828
If you slide down a banister with a horizontal zip it'll go

Blub Blub Blub Blub Blub all the way down.


The old jokes are always the best, Those that don't have a clue what I'm on about can PM me to find out.

Nasher
__________________
Nasher is offline   Reply With Quote
Old 22 September 2004, 07:07   #8
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
I think you will fined that sitting down with a vertical zip will be very uncomfortable, they do not flex terribly well!
The horizontal zip will just sit in the folds as you sit or bend over!
Nick
__________________
Nick Hearne is offline   Reply With Quote
Old 22 September 2004, 07:34   #9
Member
 
Country: UK - England
Town: nr Lymington
Boat name: JU-JU
Make: Halmatic PAC22
Length: 6m +
Engine: 140.5 Mermaid
Join Date: Sep 2003
Posts: 1,400
Why not diagonal or for that matter slightly to the right or left
des
__________________
Scary Des is offline   Reply With Quote
Old 22 September 2004, 07:35   #10
Member
 
Country: UK - England
Town: Saltash, Cornwall
Make: Rib less:-(
Length: no boat
Join Date: Sep 2002
Posts: 693
Go for the horizontal zip, might not the most comftable when using it for its intended purpose, BUT you will be able to sit down, dry zips are not the most flexable of structures.
If you notice the horizontal is standard on all (ones that I've seen) flight dry suits.
Also get the hard boots and make sure you spesify the right size to inclue thick socks as cold toes spoils the fun. Last time I checked they didn't make reinforced toes on the hard boots which is a pity, especially if you drop an anchor or race mark weights on your toes!!
Rgds
Jelly
__________________
Jelly is offline   Reply With Quote
Old 22 September 2004, 07:36   #11
TIM
Member
 
Country: Ireland
Town: Dublin
Boat name: WIZARD
Make: REDBAY 7.4
Length: 7m +
Engine: OPTI 225
Join Date: Aug 2002
Posts: 417
Quote:
Originally Posted by Rogue Wave
I think you'll find the horizontal comfort zip is only normally fitted to the drysuits sent out to the Asian market
PLEASE fill me in I am a bit Slow !!!!!!!!

I have a Ravenspring... boots and horizontal zip.... I dont think a vertical zip would work because it wouldnt bend properly.........

I am concidering getting my boots taken off for 2 reasions... 1. they mark the boat with black stripes.... 2. i cant water ski..... well learn how, at the moment .
__________________
NOT THE SHARPEST KNIFE IN THE DRAWER
TIM is offline   Reply With Quote
Old 22 September 2004, 07:40   #12
Member
 
Country: UK - Wales
Town: Southampton
Boat name: DynaMoHumm/ SRV/deja
Make: Avon8.4, 5.4 & 4.777
Length: 8m +
Engine: Cat3126 Yam 90 &70
MMSI: 42
Join Date: Dec 2003
Posts: 6,562
Quote:
Originally Posted by TIM
PLEASE fill me in I am a bit Slow !!!!!!!!

.
There no delicate way around putting so I'll PM you
__________________
Here it comes again, I don't stand a chance
Soul possession, Got me in a trance
Pullin' me back to you - Deja Voodoo
Rogue Wave is offline   Reply With Quote
Old 22 September 2004, 09:07   #13
Member
 
Country: Other
Make: Ribtec
Length: 7m +
Engine: Yamaha F225
Join Date: May 2002
Posts: 411
Quote:
Originally Posted by Nick Hearne
I think you will fined that sitting down with a vertical zip will be very uncomfortable, they do not flex terribly well!
Nick

Ah so deska.

Now I understand. Wouldn't want to antagonise the beast. Thanks all for your input
__________________
Bittentobuggery is offline   Reply With Quote
Old 22 September 2004, 09:53   #14
Member
 
Country: UK - England
Town: Whitstable
Boat name: Tango
Make: Avon and Narwhal2.4m
Length: 4m +
Engine: 60HP Yamaha
Join Date: Oct 2002
Posts: 966
Can a comfort zip be added to an existing dry suit, i have a cheapish HH dry suit and i wont wear it at the moment due to the fact that every time i get it on i need a pee, but its a pain to get off if i'm alone, so i tend not to wear it unless i know i'm going to get drenched or its freezing cold.
__________________
Bilge Rat is offline   Reply With Quote
Old 22 September 2004, 10:17   #15
Member
 
Country: UK - England
Town: Kent
Boat name: Cygnet
Make: Humber
Length: 5m +
Engine: Suzuki 70hp 4* outbo
Join Date: Apr 2004
Posts: 205
Quote:
Originally Posted by Bilge Rat
Can a comfort zip be added to an existing dry suit, i have a cheapish HH dry suit and i wont wear it at the moment due to the fact that every time i get it on i need a pee, but its a pain to get off if i'm alone, so i tend not to wear it unless i know i'm going to get drenched or its freezing cold.
I know where you are coming from !

Yes this is something that can be done to most drysuits but its not cheap, the zip alone will cost about £50 plus the cost of doing it. The other thing to consider is whether your suit has any bulky seams in the way, because this could restrict where the zip can go.
Hammond Drysuits did mine Link to Hammond Drysuits
__________________
Jackwabbit is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 10:47.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.