Anchor Locker Hatch

[akis]

Hi Guys,

Im looking to add flexiteek to my bow locker to match my deck.

Does anyone know of a flush anchor locker hatch that I can fit where there is an infill/recess to add the same flexiteek material so that only the latches and hatch border is visible.

Trying to get the hatch to blend in with the rest of the deck.

Thanks
Akis

[gtflash]

I have seen some American sites that sell ski lockers, complete with flush hatches. But a drop in module is most likely a small fortune.

You could Make one with some ply and glassed each side. A small surround inside to make the ledge the hatch would sit on. Not hard but fidely

[akis]

Need a hatch similar to this that can be a flush fit and have even less white plastic showing - looking to teek the bow as per in the photo but have a flush hatch with as much of the hatch covered with the deck material.