Reply
 
Thread Tools Search this Thread
 
Old 18 August 2003, 09:51   #11
Member
 
Country: Denmark
Town: Copenhagen
Boat name: Nemesis
Make: CAPE 79
Length: 8m +
Engine: Suzuki 250 4 stroke
Join Date: Dec 2001
Posts: 252
Send a message via AIM to Rene Send a message via MSN to Rene
Hi

Where did I see a prop like that before ?? Ohh on my boat. Damn

I was out last Sunday to rescue a 39 foot sail boat that was stranded on 2 feet of water. The guy on board was so nervous that he gave the wrong GPS position on my way out there. So after a bit of poking around in the wrong places we finally got the right position. Sadly I wrote this on top of an existing wreck position, where I normally go diving. The sail boat came of the ground and got home without any other problems.

Then I wanted to go diving and forgot about last weeks mix-up in positions. The distance from port to wreck was the same as port to ground. So just before I expected to find the wreck on my fishfinder I found 1 foot of water at 20 knots.

Well I don't think the navy had anything better to do than come and tow us back to port.

They where very help full but my prop looks a bit like yours.

So the 50 i got from towing the sailboat of the ground is now going to buy a very large cake and some drinks to the navy crew. (I didn't ask anything from the sailboat. I don't think you should, we should be able to help out without asking for money, but it is nice to get some )

Rene
__________________

__________________
Rene is offline   Reply With Quote
Old 18 August 2003, 11:15   #12
Member
 
Country: UK - England
Town: Helston, Cornwall
Boat name: Silver Fern
Make: Rayglass Protector
Length: 8m +
Engine: 2 x 250hp Verado
MMSI: 235024092
Join Date: Apr 2003
Posts: 811
Send a message via AIM to gingercoastie Send a message via MSN to gingercoastie
Well had the rough quote today for about 1800, as the prop shaft is bent and I need a whole new lower leg assembly.

Thank god for insurance.
__________________

__________________


Its all got to go - make me an offer...............

Skype - alexgreig
gingercoastie is offline   Reply With Quote
Old 18 August 2003, 11:15   #13
Member
 
Pete7's Avatar
 
Country: UK - England
Town: Gosport
Boat name: April Lass
Make: Moody 31
Length: 9m +
Join Date: Aug 2001
Posts: 4,850
I not sure there is any money in selling ribs but mending props, deffinately. Took a couple of inches off a prop on a dory in Church Bay, Rathlin Island a few years ago.

Learnt lots of lessons very quickly from that, like how to use an echo sounder, read a chart and carry a spare.

Your engine looks very shiny, ouch.



Pete
__________________
Pete7 is offline   Reply With Quote
Old 18 August 2003, 11:17   #14
Member
 
Country: UK - England
Town: Helston, Cornwall
Boat name: Silver Fern
Make: Rayglass Protector
Length: 8m +
Engine: 2 x 250hp Verado
MMSI: 235024092
Join Date: Apr 2003
Posts: 811
Send a message via AIM to gingercoastie Send a message via MSN to gingercoastie
The spare engine is a very good idea, but all the charts and echo sounders in the world do not help with flotsam.
__________________


Its all got to go - make me an offer...............

Skype - alexgreig
gingercoastie is offline   Reply With Quote
Old 18 August 2003, 11:21   #15
Member
 
Pete7's Avatar
 
Country: UK - England
Town: Gosport
Boat name: April Lass
Make: Moody 31
Length: 9m +
Join Date: Aug 2001
Posts: 4,850
I was thinking of spare prop but if you have bent the shaft that wouldn't help, well possibly as a get you home measure. Just as well its insured.

Agreed flotsum is bad news, watched a fridge go past one evening whilst diving, they float really well but hate to hit one. Plastic bags in the solent are a problem at the moment.


Pete
__________________
Pete7 is offline   Reply With Quote
Old 16 September 2003, 14:12   #16
Member
 
Country: UK - England
Town: Helston, Cornwall
Boat name: Silver Fern
Make: Rayglass Protector
Length: 8m +
Engine: 2 x 250hp Verado
MMSI: 235024092
Join Date: Apr 2003
Posts: 811
Send a message via AIM to gingercoastie Send a message via MSN to gingercoastie
A word of warning to all Suzuki owners with "Ultra Long" shafts.

Apparently there are none available. If you need a new one Suzuki will add you to the list until they have about 30 then they will run off a batch. I have been given an estimate of approx 3 months. I have already been boatless for 6 weeks.

Luckily the Suzuki dealer in Falmouth has found away around the problem (don't know how, don't care as long as I get my boat back).

So do not go bending those shafts.
__________________


Its all got to go - make me an offer...............

Skype - alexgreig
gingercoastie is offline   Reply With Quote
Old 16 September 2003, 15:25   #17
Member
 
Country: UK - Wales
Town: Milford Haven
Boat name: Various
Make: Commercial
Length: 10m +
Engine: Screw / Voith / Jets
Join Date: Sep 2002
Posts: 791
Send a message via MSN to Alex Brown
How much are they on their own? - maybe I should get my order in now just incase and carry it onboard as a spare

That sounds an absolute nightmare - waiting months for a part.... can't Suzuki whip one off another 115 engine that they have in storage or something for you?

I just sent my stainless prop back to steel developments cos it was vibrating above 4000revs.... just hope that it hasn't damaged the lower half of the engine in the mean time

Good luck with the fix....

-Alex
__________________
Flickr Photos
Youtube Videos
Alex Brown is offline   Reply With Quote
Old 16 September 2003, 16:13   #18
Member
 
Country: UK - Wales
Town: Aberystwyth
Boat name: Undecided
Make: Undecided
Length: Undecided
Engine: Undecided
Join Date: Apr 2002
Posts: 605
Ouch, not good news then. Sounds a bit off that they don't bother stocking parts for these engines, bloody stupid that you're being told you have to wait 3 months before you can even get the thing fixed.

Let's hope the cunning plan of the Falmouth dealer works out then!

Matt
__________________
narked is offline   Reply With Quote
Old 24 September 2003, 11:27   #19
Member
 
Country: UK - England
Town: Helston, Cornwall
Boat name: Silver Fern
Make: Rayglass Protector
Length: 8m +
Engine: 2 x 250hp Verado
MMSI: 235024092
Join Date: Apr 2003
Posts: 811
Send a message via AIM to gingercoastie Send a message via MSN to gingercoastie


Well it's finally fixed.

Call me cynical but I wonder if it had anything to do with my complaint to Suzuki at the boat show.

With regards to the spares problem, apparently there is no need to panic, as if the item is out of stock they will air freight one from japan and it usually only takes 10 days, and every 3 months there is a regular shipment via ship (funnily enough) with the regular items.

So alls well that ends well.

__________________

__________________


Its all got to go - make me an offer...............

Skype - alexgreig
gingercoastie is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 01:28.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.