A frame question

[Mark A]

Hello All, please bear with me i'm new here! I have recently purchased my first RIB (in August), and have used it 5 or so times since in Southampton water, (the years of effort persuading the wife payed off) i have carried out one or 2 jobs, tidying the boat up replacing fixings, servicing the trailer etc. I would like to know if anyone can recomend somewhere to have an A frame made up. Also the collar needs some attention is there anywhere local to get this sorted?

[Louise]

Hi Mike and welcome. Your questions have been asked before so try doing a search.

Here's a couple to get you started:

Tube repairs: http://www.rib.net/forum/showthread....airs#post24615

A frame: http://www.rib.net/forum/showthread....me+manufacture

HTH and hope to see you on the water!

[Mark A]

Thanks Louise, will give those a try, do you know where drivers wharf is?

[Louise]

Drivers Wharf is right next to Northam Bridge. The contact details are here. Although these details are not those of Autoweld/Gordon Compton, you will probably be able to get hold of him through them.

[Mark A]

Thank you very much for your help i'll check it out