Hi folks been awhile since an update and don't have all the photos (will try and get some more at the weekend)!
1.) Fuel tank fixed to the floor and also plumbed into the console via Fill and vent point
2.) Engine gearbox cavitation plate welded up, new impeller fitted and also painted
3.) Wiring in console now wired up including switch panel, battery isolator switch
4.) Trunking now located under the floor and wiring fed through from console to transom
5.) Sonar sounder fitted to hull
6.) Hydraulic steering fitted and bled
7.) Console screwed and glassed into place
8.) Oil tank secured to floor under drivers seat
Next up jobs
1.) Finish polishing A frame, do wiring and fit to transom
2.) Finish rigging at the engine end
3.) Fit seats
4.) Fit windshield
5.) Fit 2nd winch to trailer (1 winch for recovery and 1 for launch)
Now have a date in mind to get the boat on the water for some testing!!