Zodiac Grand Raid MK3

[Squid Boat]

Originally Posted by yiannis50

Does the inlatable killl has to be glue on the buttom, (what king of glue???? )
Thanks`

Yes, post # 36. same glue. Some glue in Mil spec Velcro pads, but I don't like sand lodging at the Velcro connection.

Cheers, Squid

[yiannis50]

Gr mk3 ic valve spring nut torgue pressure???

[yiannis50]

I change the spring valve and I like to know how to reset the Nut to the same height

[berat]

I know this is an old topic but I wonder any one knows How do i assemble the windshield to the MKIII grand raid. And do you recommend to use it.

[smokeyjoe47]

I just came across your old post about the zodiac windshield. We’re you ever to mount it properly? It would only work if you have the piece of fibreglass board under the bow-dodger.
Josef

[mirssant]

Hello, I need a keel for a zodiac mk3, how long is it?

[spartacus]

Can’t help on the size, but there’s a part number which is Z2134 for a MKIII GR. Zodiac know how to charge so you’re looking at £250 GBP + shipping. Try a Zodiac main dealer in Mexico to see if they can source.

They usually fail at the keel where the material is folded over and suffer abrasion under the aluminium floorboards with sand.