twist lock nozzle

[ukprometheus]

well i now have my quicksilver 310 but appear to be missing the twist lock nozzle for the pump, where is the best place place to get a replacement.??

I would also like to find some kind of pressure gauge, i understand quicksilver supply these with new boats also but i may be wrong on that

[willk]

Seeing as you need two bits, I'd suggest ordering a new Quicksilver pump, c/w a gauge and all the bits. They're about £20 all in.

[ukprometheus]

Originally Posted by willk

Seeing as you need two bits, I'd suggest ordering a new Quicksilver pump, c/w a gauge and all the bits. They're about £20 all in.

supplier who does evryone buy there bits from on here

[Max...]

Barnet Marine are very helpful for SIB and RIB bits.

[lockieboi]

Do you mean one of these?

eBay - The UK's Online Marketplace

[ukprometheus]

Originally Posted by lockieboi

Do you mean one of these?

eBay - The UK's Online Marketplace

i did see that in my searching but i suspect the spacers are going to forever be falling off and i will get annoyed with it

[willk]

Originally Posted by ukprometheus

i did see that in my searching but i suspect the spacers are going to forever be falling off and i will get annoyed with it

This is why I didn't buy one. My seller has added £4 to his price since September. So no linky for him - sorry Niall,

[ukprometheus]

Originally Posted by willk

This is why I didn't buy one. My seller has added £4 to his price since September. So no linky for him - sorry Niall,

Any suggestion on where to buy one willk, i have a pump just no nozzle

Im in no hurry cos im going nowhere in this weather, i just want to make sure i have evrything i need for when the weather warms up

[willk]

Pacermarine have the full pump assembly on Ebay. The gauge is included, as are a broad range of fittings. I think it's better value than mucking around with DIY fittings and gauges. I hope you have some kind of fast air delivery, aside from the pump. If you don't, you're gonna hate filling that boat...

[ukprometheus]

Originally Posted by willk

Pacermarine have the full pump assembly on Ebay. The gauge is included, as are a broad range of fittings. I think it's better value than mucking around with DIY fittings and gauges. I hope you have some kind of fast air delivery, aside from the pump. If you don't, you're gonna hate filling that boat...

i already have that very same pump dude just no nozzle, i been reading up on here about electric pumps, just got to make my mind up on that.
i have a 12v ancillary feed in the boot of my astra estate so gonna plug in there for the bulk of the inflation.
my other issue is life jackets and im a fairly well built fella and i dont want to constricted by the life jacket, the search goes on.
ok ok i can hear you say it "fat git"