Reply
 
Thread Tools Search this Thread
 
Old 22 June 2010, 12:30   #1
Member
 
Country: UK - England
Town: Bridgwater
Make: Yamaha
Length: under 3m
Engine: Mercury 5hp
Join Date: Jun 2010
Posts: 4
Total newbie - Advice on pressures etc

I have just bought myself a used Yamaha 265S with a mercury 5hp but have been unable to find info regarding correct pressures.

I have found similar models which state around 0.25 bar / 3 psi for the side chambers but found no info on the front chamber or the inflatable keel.

Any help much appreciated.

My greatest fear is overinflating so have probably been running it far too soft.
__________________
koenigswoof is offline   Reply With Quote
Old 22 June 2010, 18:26   #2
Member
 
Country: UK - England
Town: Bury
Boat name: O' ALCHEMY
Make: Honwave 3.8 IE
Length: 3m +
Engine: Honda 15hp 4 stroke
MMSI: 235905781
Join Date: Jul 2009
Posts: 134
Hi there and welcome to ribnet, I'm sure you'll get a lot of help and advice on here. I know I have.

Regarding your Yamaha and pressures etc i'm not sure that this helps but I have a honwave and the tubes are inflated to .25 Bar and the 2 floor chambers to .8 bar so I would expect yours to be something similar.

Jake
__________________
jake 4589 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 01:45.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.