Reply
 
Thread Tools Search this Thread
 
Old 05 October 2014, 15:31   #11
Member
 
Country: UK - England
Town: cannock
Boat name: Harpoon
Make: Zodiac futura
Length: 3m +
Engine: 30 hp
Join Date: Jul 2014
Posts: 42
Thanks , I will lift it up and fill it up mark the drips. . I will get the two pack glue I believe the boat is pvc . I will repair the prop as they are expensive to replace . If the boat has to be reglued do those joints have to be opened up or just tickled over the top with glue .
Regards chris
__________________

__________________
harpo is offline   Reply With Quote
Old 05 October 2014, 16:44   #12
Member
 
Peter_C's Avatar
 
Country: USA
Boat name: Uh...a kayak?
Length: 4m +
Join Date: Dec 2009
Posts: 1,485
If the glue is failing it will require complete disassembly from the bow to the transom. The actual tubes are thermo welded and won't generally fail. It is all the black parts that require repair. FWIW it is a huge job that takes around 40 hours. Not worth it to pay some one, but a handy person with only a few items can do it. Heat gun, some scotch brite scuffy pads, acetone, MEK, disposable paint brushes, a container to measure and mix the glue, along with a few other minor items is all it takes. To be clear it is a BIG project.

As to filling it that should work, but I would recommend taking the floor out and floating it for confirmation of the repairs.
__________________

__________________
Peter_C is offline   Reply With Quote
Old 05 October 2014, 16:47   #13
Member
 
Landlockedpirate's Avatar
 
Country: UK - England
Town: St Helens
Boat name: Wine Down
Make: Maxum
Length: 8m +
Engine: Inboard
Join Date: Apr 2012
Posts: 934
Quote:
Originally Posted by Peter_C View Post
Landlocked beat me to it. Landlocked how do you get the water out from under the floor boards? Did you drill a hole? Or is the pump connected to the one of the scupper holes outside?
I have fitted a smaller (1/2") pipe and I can just about get the pipe between the air floor and the outer skin in the corner between the transom, tube and floor. I then route the pipe down to the lowest point under the floor.
__________________

__________________
Landlockedpirate is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 16:03.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.