Reply
 
Thread Tools Search this Thread
 
Old 07 July 2013, 07:06   #1
Member
 
keeno07's Avatar
 
Country: UK - England
Town: Woodbridge
Make: Dykemoor
Length: 4m +
Engine: Mariner 30hp
Join Date: Jun 2012
Posts: 38
Location of fuel tank

What are thoughts on location of fuel tank. Mine is located in rear of boat below the outboard. Had thought of moving it forward, but don't like the idea of the fuel line running along the boat.
__________________
keeno07 is offline   Reply With Quote
Old 07 July 2013, 09:19   #2
Member
 
Country: UK - Scotland
Make: Honwave t38
Length: 3m +
Engine: mariner 25 hp
Join Date: May 2013
Posts: 15
I keep mine at the outboard as well, I have changed the engine trim to compensate. I find that I rarely use this area so in essence gives me more overall room.
I did however buy fuel line to move it to under the front seat, I just did that after reading lots of posts of that being the preferred location.. Doh!!! , more money wasted...
some say the weight of a full tank helps lower the front of the boat if the weight is at the front, on my honwave I have Velcro at the side to hold the fuel line and keep it out of the way, at the end of the day it makes little difference IMO so is up to personal preference.
__________________
Hooks is offline   Reply With Quote
Old 07 July 2013, 09:30   #3
Member
 
Country: UK - England
Length: 3m +
Join Date: Sep 2008
Posts: 2,762
Hooks has probably summarised quite well.

Are these SIBs or RIBs? SIB is generally more susceptable to moving weight around although all boats will be to some extent.

How big a tank? Is it full? It wont stay full all day so even if it makes a difference at the start of the day it wont at the end.

How much other weight being carried. Is any of it more dynamic to move around? (i.e. people who can sit forward or back to help you plane.)

Finally, if its planing OK without moving the tank then I've only ever known people say it makes it easier to plane not get better economy or faster speeds once planing so if you are getting up there OK I'm not sure what you are expecting to achieve..
__________________
ShinyShoe is offline   Reply With Quote
Old 07 July 2013, 17:13   #4
Member
 
Peter_C's Avatar
 
Country: USA
Town: NorCal
Boat name: SHARKY
Make: AB
Length: 4m +
Engine: Honda BF75 & BF5
Join Date: Dec 2009
Posts: 1,910
My boat is tiller steering so the space on the port side is useless for anything other than storage, and fuel tank just happens to fit there perfectly, with my tool box on the high side. Scuba tanks go in the bow to keep it down

__________________
Peter_C is offline   Reply With Quote
Old 07 July 2013, 22:46   #5
Member
 
m chappelow's Avatar
 
Country: UK - England
Town: yorkshire
Boat name: little vicky
Make: avon ex RNLI
Length: 3m +
Engine: tohatsu
Join Date: Mar 2008
Posts: 2,310
Quote:
Originally Posted by Peter_C View Post
My boat is tiller steering so the space on the port side is useless for anything other than storage, and fuel tank just happens to fit there perfectly, with my tool box on the high side. Scuba tanks go in the bow to keep it down
You have a nice set up there Peter,
How about we start a ( Show us your console/pod thread )
__________________
m chappelow is offline   Reply With Quote
Old 08 July 2013, 19:31   #6
Member
 
Locozodiac's Avatar
 
Country: Other
Town: Lima-Peru
Boat name: Nautile
Make: Sea Rider 450 Rib
Length: 4m +
Engine: Tohatsu 5/18/30 HP
Join Date: Sep 2007
Posts: 1,998
Quote:
Originally Posted by keeno07 View Post
Had thought of moving it forward, but don't like the idea of the fuel line running along the boat.
Is it a 4 Mtr sib or rib with or without a bow locker ?

Happy Boating
__________________
Locozodiac is offline   Reply With Quote
Old 20 July 2013, 18:41   #7
Member
 
Evgeny's Avatar
 
Country: Russia
Town: Moscow Russia
Make: Zodiac
Length: 3m +
Engine: Mercury 15M
Join Date: Nov 2011
Posts: 8
Hi,
I mount fuel tank on my Cadet 340s in the front. It balanced my weight and it is a good place for anchor as it is seen on the photo. One disadvantage: keel valve is under the tank.
Best regards,
Evgeny
Attached Thumbnails
Click image for larger version

Name:	ancor s.jpg
Views:	798
Size:	43.1 KB
ID:	83068  
__________________
Evgeny is offline   Reply With Quote
Old 20 July 2013, 18:54   #8
Member
 
moore288's Avatar
 
Country: Denmark
Town: Copenhagen
Make: Ribeye
Length: 6m +
Engine: 115hp OB
Join Date: Jun 2013
Posts: 79
I had an Aerotec 380 and put I under the forward seat. Fuel line ran back under tube and was not a problem...
__________________
moore288 is offline   Reply With Quote
Old 21 July 2013, 16:20   #9
Member
 
Evgeny's Avatar
 
Country: Russia
Town: Moscow Russia
Make: Zodiac
Length: 3m +
Engine: Mercury 15M
Join Date: Nov 2011
Posts: 8
Quote:
Originally Posted by moore288 View Post
I had an Aerotec 380 and put I under the forward seat. Fuel line ran back under tube and was not a problem...
Hi moore228,
How are you fixed the fuel tank to inflatable floor?
Evgeny
__________________
Evgeny is offline   Reply With Quote
Old 21 July 2013, 16:27   #10
Member
 
moore288's Avatar
 
Country: Denmark
Town: Copenhagen
Make: Ribeye
Length: 6m +
Engine: 115hp OB
Join Date: Jun 2013
Posts: 79
Hi - I used a bungee wrapped once through the tank handle then round the fitting that the fuel pipe came out of. There are two two little ties on the Aerotec floor (glued on by manufacturer but if you don't have them on yours they could easily be retro fitted) for the bungee hooks. Richard
__________________
moore288 is offline   Reply With Quote
Old 21 July 2013, 19:19   #11
Member
 
Evgeny's Avatar
 
Country: Russia
Town: Moscow Russia
Make: Zodiac
Length: 3m +
Engine: Mercury 15M
Join Date: Nov 2011
Posts: 8
Quote:
Originally Posted by moore288 View Post
Hi - I used a bungee wrapped once through the tank handle then round the fitting that the fuel pipe came out of. There are two two little ties on the Aerotec floor (glued on by manufacturer but if you don't have them on yours they could easily be retro fitted) for the bungee hooks. Richard
Thanks Richard,
I will think about this possibility to mount he tank under keel valve this case, if I decide to buy second boat with inflatable flour for short time fishing, as it been done on my boat with plywood flour on photo above.
Best regards,
Evgeny
__________________
Evgeny is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 03:00.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.