Reply
 
Thread Tools Search this Thread
 
Old 05 July 2008, 02:44   #1
Member
 
Country: UK - England
Town: wakefield
Boat name: senor grumpy
Make: quicksilver 3.10m
Length: 3m +
Engine: mariner 9.9
Join Date: Jun 2008
Posts: 33
inflation 2

hi, when inflating my new boat would you pump it up to psi (3.6) it says around the valve , i mention this because the tubes seem hard with only 2.6 or abouts in them,should the tubes be really hard when blown up, instructions seem a bit vague,, thanks
__________________

__________________
fruitbat is offline   Reply With Quote
Old 05 July 2008, 04:53   #2
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,242
Pump them up to the recommended 3.6 psi & remember if you pump up in the hot sun & then put it in the water sun goes in & it starts raining you will drop in pressure & may need topping up! Odiously this works the other way!
__________________
Nick Hearne is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 04:26.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.