Originally Posted by Bodge
Wondering how much material I need to complete the following.
Reattach the transom on the C5 using hypalon as suggested. How much CMS is needed to make up all the new bits? Glue will be Z7098
Reattach the floor on the C5 but not sure what glue to use for this task. PVC Z7096 or CMS Z7098.
Redo thrust board on the GR MK11, have hypalon in gray but need glue.
Any suggestions on glue and material size would be appreciated.
Z7098= elastomer glue (csm, neo)
Z7096= plastomer glue (pvc, pu)
Use PVC glue and MEK for the floor. Sand the CSM part. Make sure you remove all of the old glue.
For the transom, you'd probably need about 1 square meter of material. Use Z7098 for everything. Toluene for cleaning and reactivation if required.