Reply
 
Thread Tools Search this Thread
 
Old 30 September 2013, 17:11   #1
Member
 
Join Date: Sep 2013
Posts: 19
4 or 2 stroke.

I'm new to this forum and I am sure this has been asked before, but what do you all recommend. Currently I have an XPro 3.8m sib, with a 9.9hp mariner long shaft engine 4 stroke. Very nice engine but a long shaft, so looking at changing to a short shaft 15 or 20 hp next year, but should I steer away from 2 stroke and stick with 4.
__________________
Roadie is offline   Reply With Quote
Old 30 September 2013, 17:23   #2
Member
 
Country: UK - Scotland
Boat name: Wildheart
Make: Humber/Delta Seasafe
Length: 5m +
Engine: Merc 60 Clamshell
MMSI: 235068449
Join Date: Apr 2007
Posts: 4,667
Wlcome to Ribnet!

High level summary:

2- stroke = lighter weight to lug around
4- stroke = quieter, less smelly & if you do a lot of low speed stuff - more fuel efficient.

These of coures are big generalisations, and if you love the smell of a cold 2- stroke in the morning then it's a done deal!


Humour aside, one thing to watch is that the definition of "long" changes somewhere in the HP teens. I assume from your comment that you have found that out already, but thought it best you hear it twice than find your prop doesn't reach the water or you have an extra 5" draught that wasn't there before!


As to the "steer clear of 2- stroke" - This is a good polariser on theis forum, but unless you are on a trailer, all I'll say having had the dubious pleasure of lugging 28Kgs worth of 1972 Johnson 20Hp down to the beach (with 2 of us to carry it) that every Kg (or lack therof) helps! It may "only" be X kg, but outboards are remarkably awkward things to pick up. and if it's a 4- stroke will also likely be fussy as to how you can carry / lay it down.
__________________
9D280 is offline   Reply With Quote
Old 30 September 2013, 20:01   #3
Member
 
Peter_C's Avatar
 
Country: USA
Town: NorCal
Boat name: SHARKY
Make: AB
Length: 4m +
Engine: Honda BF75 & BF5
Join Date: Dec 2009
Posts: 1,895
Owning a two stroke, and having played in a four stroke yesterday that was a 9.9hp I am all for the cleaning running 4 strokes.
__________________
Peter_C is offline   Reply With Quote
Old 30 September 2013, 21:41   #4
Member
 
Join Date: Sep 2013
Posts: 21
Wow... Is my engine too big then? Got a 3.8m rib with a tohatsu 30hp 2 stroke on it...
__________________
CelticNate is offline   Reply With Quote
Old 30 September 2013, 21:58   #5
Member
 
Country: Other
Town: Porto - Portugal
Boat name: XPTO III
Make: Valiant
Length: 5m +
Engine: Suzuki DF90
Join Date: Jul 2013
Posts: 8
I had a 3.5 m RIB with a 25 HP 2 ST Mariner. Very fast and fun to ride. Light and not so hungry on fuel.
I moved to a larger RIB (4.5 m RIB with a 40 HP 2 ST Mariner). Not so fast but still fun to ride. Heavier and hungrier.
Now I own a larger RIB (5.2 m RIB with a 90 HP 4 ST Suzuki). Faster than the previous ones and fun to ride but much heavier and needing less fuel.
Just a final comment: since I normally use the RIB in a lake, the usage of a 4 ST is almost a must.
__________________
Amcarrapatoso is offline   Reply With Quote
Old 30 September 2013, 22:19   #6
Member
 
lockieboi's Avatar
 
Country: UK - England
Town: kent
Boat name: SIBotage
Make: Prowave
Length: 3m +
Engine: 15hp Johnson 2 smoke
Join Date: Sep 2010
Posts: 435
Quote:
Originally Posted by Roadie View Post
I'm new to this forum and I am sure this has been asked before, but what do you all recommend. Currently I have an XPro 3.8m sib, with a 9.9hp mariner long shaft engine 4 stroke. Very nice engine but a long shaft, so looking at changing to a short shaft 15 or 20 hp next year, but should I steer away from 2 stroke and stick with 4.
The weight is the deciding factor for us SIBers.
I assemble and dissemble my SIB everytime and have used a 15hp 2 stroke and now have a 25hp 2 stroke. The 15 weighs about 36kgs and the 25 about 50.
If you're looking at getting a 15hp 4 stroke I think they weigh roughly the same as my 25!
So for no extra weight you get 10 more horses.
Long live the 2 smoke!
Obviously if your trailering then my input is irrelevant.
__________________
lockieboi is offline   Reply With Quote
Old 01 October 2013, 02:37   #7
Member
 
Join Date: Sep 2013
Posts: 19
My 9.9 weighs 50 kg, so is just about manageable on my own as I too assemble each time.
__________________
Roadie is offline   Reply With Quote
Old 01 October 2013, 04:19   #8
Member
 
Projectile's Avatar
 
Country: Canada
Boat name: WB465
Make: Zodiac
Length: 4m +
Engine: 2013 ETEC 30
Join Date: Dec 2012
Posts: 256
New or used?

If you're in the market for a new engine, get a new ETEC 2- stroke. I love my ETEC 30: quiet, no smoke, no smell, powerful, clean, efficient, lovely. Very little maintenance too, and no break-in required.

If you're in the market for an older engine, then, unfortunately, the older 2-strokes don't come close to the new ETECs. I'd get an older 4-stroke if the weight was ok.
__________________
Projectile is offline   Reply With Quote
Old 01 October 2013, 06:59   #9
Member
 
azzurro's Avatar
 
Country: Other
Town: Madrid-Almeria
Boat name: SEPIA
Make: honwave
Length: 3m +
Engine: Honda BF20
Join Date: Feb 2010
Posts: 197
I understand that banning small 2strokes is stupid (they may be dirty but because of being small they are not so much as big ones); and small engines need to be as light as possible (personally I do not care about a 50hp engine being heavier since I will not move with my arms) so I think small 2 strokes should be allowed.

But when 2stroke vs. 4stroke evaluating, consider this:

1.- 2 strokes are banned in inner waters in most european countries.
Also in most european countries you will not be able to register a old 2stroke in a new boat (in Spain, since 2010). Thus you will not be able to get assurance, etc. So you will be ot of the law.
However boats older than 2010 can still use their old 2 stroke engines (but cannot replace them with other 2 strokes).

I do not know UK and USA laws but I believe they might be getting the same restrictions. Also, I do not now whether in UK and USA illegal boat owners are allowed because of relaxed law culture. Here in Spain, if you are lucky enough you may never get one, but...
boat bills have three zeros!

2.- 2 strokes are getting older since they are no longer manufactured. As a result of this and because of the demand, second hand 2 strokes are getting too much expensive.



On any other discussion such as maintenance, toughness, weight, etc. I think small 2 strokes are far better than small 4 strokes (yes, 4 stroke may be more fuel saving engines, but we are talking about small engines!).
__________________
azzurro is offline   Reply With Quote
Old 01 October 2013, 07:27   #10
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,865
RIBase
Quote:
Originally Posted by azzurro View Post
1.- 2 strokes are banned in inner waters in most european countries.
2.- 2 strokes are getting older since they are no longer manufactured.
Hmmm, not so sure about that
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 01 October 2013, 07:44   #11
Member
 
azzurro's Avatar
 
Country: Other
Town: Madrid-Almeria
Boat name: SEPIA
Make: honwave
Length: 3m +
Engine: Honda BF20
Join Date: Feb 2010
Posts: 197
Quote:
Originally Posted by Pikey Dave View Post
You are right, Evinrude E-tec are not banned. They are the only one manufacturer which is not banned because of low emmissions.

But E-Tec small outboards (i.e. 15hp) do not have any advantage vs. 4 strokes.
- Much heavier than 4strokes (!!!!!)
- Not as tough as old 2strokes.

OK, you may lay them in the floor on both sides. But quoting E-Tec engines in this thread is absurd.
__________________
azzurro is offline   Reply With Quote
Old 01 October 2013, 09:06   #12
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,865
RIBase
Just to clarify

Quote:
Originally Posted by azzurro View Post
You are right, Evinrude E-tec are not banned. They are the only one manufacturer which is not banned because of low emmissions. I'm glad we cleared that up then

But E-Tec small outboards (i.e. 15hp) do not have any advantage vs. 4 strokes.Smallest Etec is actually 25hp so is probably just outside the scope of this discussion
- Much heavier than 4strokes (!!!!!) Eh! The lightest 25hp Etec is 66kg, the lightest 4s Yammy is 76KG
- Not as tough as old 2strokes. Says who, I'll fight you for it

OK, you may lay them in the floor on both sides. But quoting E-Tec engines in this thread is absurd Absurd is a bit strong, slightly irrelevant maybe, but so is saying that 2strokes are banned on inland waters & production has ceased. .
We wouldn't want to cause any confusion, would we?
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 01 October 2013, 09:41   #13
Member
 
lockieboi's Avatar
 
Country: UK - England
Town: kent
Boat name: SIBotage
Make: Prowave
Length: 3m +
Engine: 15hp Johnson 2 smoke
Join Date: Sep 2010
Posts: 435
Quote:
Originally Posted by Roadie View Post
My 9.9 weighs 50 kg, so is just about manageable on my own as I too assemble each time.
So get yourself a nice 25hp 2 stroke and you'll be handling the same weight but have an extra 15hp to play with.
__________________
lockieboi is offline   Reply With Quote
Old 10 October 2013, 12:14   #14
Member
 
sparky666's Avatar
 
Country: UK - England
Town: Looe/Fowey
Make: Honwave 4.0
Length: 4m +
Engine: mariner 20 4 stroke
Join Date: Oct 2013
Posts: 46
my mariner 20 4 stroke only weighs 50kg not much more than a two stroke,its quiet,no expensive two stroke oil,consumes less fuel than an equivalent two stroke,and burns clean.
Dare i say four strokes are less complicated than a modern injected two stroke
servicing a four stroke has a few additional items,oil and filter and a new easily changed cam belt every three or four years with the addition of valve clearance adjustments if ever needed.
this is easy to do and parts can be obtained cheaply.
But overall cruising up a river quietly with no smoke wins it every time for me
__________________
sparky666 is offline   Reply With Quote
Old 10 October 2013, 12:37   #15
Member
 
Country: UK - England
Town: macclessfield
Boat name: Reach Out
Make: Quicksilver
Length: 4m +
Engine: 30hp Tohatsu EFI
Join Date: Aug 2010
Posts: 301
I loved the lower weight and power (torque in midrange) and simplicity of my previous 2 smokes.... Great for racing....

But the noise after a while!!!! My 4 stroke is so smooth and quiet.....

For performance all round, stick to 2 stroke.. for refinement buy 4 stroke...

we are talking about small outboards, not large modern air scavenging 2 strokes
__________________
simsy is offline   Reply With Quote
Old 10 October 2013, 13:10   #16
Member
 
sparky666's Avatar
 
Country: UK - England
Town: Looe/Fowey
Make: Honwave 4.0
Length: 4m +
Engine: mariner 20 4 stroke
Join Date: Oct 2013
Posts: 46
perfectly put, a four stroke is a day in day out allrounder
__________________
sparky666 is offline   Reply With Quote
Old 10 October 2013, 14:43   #17
Member
 
Country: UK - Scotland
Town: Glasgow
Boat name: snagglepuss
Make: Shetland
Length: 6m +
Engine: 90 hp Outboard
Join Date: Nov 2011
Posts: 562
and the honda 20hp short shaft is only 47kg.

they also attended the UK's largest boat show as did suzi, yamaha, mercury/ mariner, Tohatsu etc but amazingly Evinrude were the only manufacture that didnt and have a UK office for marine staff like most other manufactures apart from Evinrude!

back to OP question. 2 stroke if you are looking for max power to weight ratio and have a limited budget as they are cheaper 2nd hand than 4 strokes. yes they are older but they also dont cost silly money 2nd hand.
__________________
clydeoutboards is offline   Reply With Quote
Old 10 October 2013, 18:29   #18
Member
 
chipko's Avatar
 
Country: UK - England
Town: Up North and right a bit
Make: XS500/Merc340/Bic245
Length: 5m +
Engine: Mar 60/20/3.5/Hon2.3
Join Date: Sep 2013
Posts: 1,055
Love the idea of 2 stroke power to weight ratio but preferred the benefits to buy a new, so channelled down the 4 stroke route. Finally decided on a Suzuki DF20A short shaft, fuel injected, at 44kg not a massive weight penalty over 2 strokes, and just manageable to lug around single handed - boat left inflated but engine removed after use. Early days but not regretting it so far - quiet, powerful, economical and under warranty.
__________________
chipko is offline   Reply With Quote
Old 10 October 2013, 21:18   #19
Member
 
sparky666's Avatar
 
Country: UK - England
Town: Looe/Fowey
Make: Honwave 4.0
Length: 4m +
Engine: mariner 20 4 stroke
Join Date: Oct 2013
Posts: 46
That is a light engine and fuel injected ,good one!
__________________
sparky666 is offline   Reply With Quote
Old 11 October 2013, 04:34   #20
Member
 
Country: USA
Town: Pooler, Georgia
Boat name: not applicable
Make: Avon
Length: 3m +
Engine: Outboard
Join Date: Aug 2011
Posts: 156
Check out this video. They compare 15 HP Yamahas.

Seamedia - Fisherman & Boatowner - Independent Boating Information from Australias' Leading Boating Magazine
__________________
frankc is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 16:58.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.