Reply
 
Thread Tools Search this Thread
 
Old 16 April 2016, 19:20   #1
Member
 
Join Date: Jun 2010
Posts: 2,934
what ratchet straps for 6.8

hey folks,

looking at getting all new straps for the boat and wondering if 50mm/5000kg is enough?

i have some "lorry" straps but they don't fit well due to the ratchet ending up in a very awkward place to actually winch up.

thinking 50mm endless but those big enough?

or any links to decently priced 75mm would be good if those are needed (10,000kg)

cheers
__________________
Xk59D is offline   Reply With Quote
Old 16 April 2016, 19:34   #2
Member
 
Country: UK - Wales
Town: Southampton
Boat name: DynaMoHumm/ SRV/deja
Make: Avon8.4, 5.4 & 4.777
Length: 8m +
Engine: Cat3126 Yam 90 &70
MMSI: 42
Join Date: Dec 2003
Posts: 6,562
!s the 500kg WLL or breaking strain
__________________
Here it comes again, I don't stand a chance
Soul possession, Got me in a trance
Pullin' me back to you - Deja Voodoo
Rogue Wave is offline   Reply With Quote
Old 16 April 2016, 19:39   #3
Member
 
Join Date: Jun 2010
Posts: 2,934
it is 5000kg minimum break strain, not 500.
__________________
Xk59D is offline   Reply With Quote
Old 16 April 2016, 19:47   #4
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Get some stainless ones made to length
__________________
mick is offline   Reply With Quote
Old 16 April 2016, 19:52   #5
Member
 
Join Date: Jun 2010
Posts: 2,934
mick, if 5000kg minimum break is enough then they are only about 8 quid each.....how much are stainless and where from?

i need to know if 50mm/5000kg is enough though?
__________________
Xk59D is offline   Reply With Quote
Old 16 April 2016, 19:59   #6
Member
 
A1an's Avatar
 
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,896
RIBase
what ratchet straps for 6.8

5000kg enough?

Surely!

I use 800kg straps x3.

Our timber lorries use 4x 5000kg straps for tying down 25t of logs.
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
A1an is offline   Reply With Quote
Old 16 April 2016, 20:23   #7
Member
 
Join Date: Jun 2010
Posts: 2,934
i suspected they were enough but double checking.

I will crack on and order some now ...thanks all.
__________________
Xk59D is offline   Reply With Quote
Old 16 April 2016, 20:24   #8
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,681
My 2p

Get them big and wide - never mind the rating. Cut them to length after.

Spray them with a bit of lithium grease and don't worry about S/S - as long as they're rated.
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 16 April 2016, 20:48   #9
Member
 
Join Date: Jun 2010
Posts: 2,934
75mm is what lorrys use but they are circa 30 quid each and rated to 10,000kg.

50mm is about 9 quid for same thing but 5000kg
__________________
Xk59D is offline   Reply With Quote
Old 16 April 2016, 20:57   #10
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,681
Quote:
Originally Posted by Xk59D View Post
75mm is what lorrys use but they are circa 30 quid each and rated to 10,000kg.

50mm is about 9 quid for same thing but 5000kg
I use 50mm for the stern and bow tie down (blue?) and I have an orange one (75MM?) that I use as a run-on preventer. I like the big sizes as the friction is spread a bit and as they degrade with sun, age, chemicals and abrasion, they're still giving me the couple of tons I want.
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 16 April 2016, 21:32   #11
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Quote:
Originally Posted by Xk59D View Post
75mm is what lorrys use but they are circa 30 quid each and rated to 10,000kg.

50mm is about 9 quid for same thing but 5000kg

So why would you spend how ever many K on a Rib & engine and quibble over £40 to £60 on three decent straps can't understand some of you chaps penny-wise and pound - foolish
I've got 3 x 50 mm rated 5 tons each £45
__________________
mick is offline   Reply With Quote
Old 16 April 2016, 21:41   #12
Member
 
Join Date: Jun 2010
Posts: 2,934
Quote:
Originally Posted by mick View Post
So why would you spend how ever many K on a Rib & engine and quibble over £40 to £60 on three decent straps can't understand some of you chaps penny-wise and pound - foolish
I've got 3 x 50 mm rated 5 tons each £45
not sure what are you on about there?

i've just bought the exactly the same spec straps you use.....50mm and 5000kg x3 and a smaller 25mm 1500kg to stop engine bouncing.

i didn't buy stainless as i don't care for my app, boat is stored inside and for 40 quid all in happy to replace them now and again.
__________________
Xk59D is offline   Reply With Quote
Old 17 April 2016, 07:09   #13
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,681
Quote:
Originally Posted by mick View Post
penny-wise and pound - foolish
I've got 3 x 50 mm rated 5 tons each £45
Jeeze Mick - I didn't know you had it in you!

I have four tie downs, they're mild steel I guess, rated same as yours are. I give them a spray of grease each autumn. Reckon they cost me a total of €48 (less than one of yours) so I'm up €177 - not what I call pennies but then I do have a pint or two of tartan blood in me.

No sign of them failing yet (third season) but I will have to replace some over the next year or so as the webbing has frayed from friction on the trailer (my bad but to some extent unavoidable). I'll be saving again then!

BTW, I have a stainless ratchet strap hold my liferaft in place. I noticed yesterday that it is beginning to rust - must clean it and spray it now as I'm too tight to replace it with like....

__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 17 April 2016, 10:07   #14
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Quote:
Originally Posted by willk View Post
Jeeze Mick - I didn't know you had it in you!

I have four tie downs, they're mild steel I guess, rated same as yours are. I give them a spray of grease each autumn. Reckon they cost me a total of €48 (less than one of yours) so I'm up €177 - not what I call pennies but then I do have a pint or two of tartan blood in me.

No sign of them failing yet (third season) but I will have to replace some over the next year or so as the webbing has frayed from friction on the trailer (my bad but to some extent unavoidable). I'll be saving again then!

BTW, I have a stainless ratchet strap hold my liferaft in place. I noticed yesterday that it is beginning to rust - must clean it and spray it now as I'm too tight to replace it with like....


It's a Yorkshire thing 😜👌
__________________
mick is offline   Reply With Quote
Old 17 April 2016, 15:32   #15
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Quote:
Originally Posted by willk View Post
Jeeze Mick - I didn't know you had it in you!

I have four tie downs, they're mild steel I guess, rated same as yours are. I give them a spray of grease each autumn. Reckon they cost me a total of €48 (less than one of yours) so I'm up €177 - not what I call pennies but then I do have a pint or two of tartan blood in me.

No sign of them failing yet (third season) but I will have to replace some over the next year or so as the webbing has frayed from friction on the trailer (my bad but to some extent unavoidable). I'll be saving again then!

BTW, I have a stainless ratchet strap hold my liferaft in place. I noticed yesterday that it is beginning to rust - must clean it and spray it now as I'm too tight to replace it with like....


Mine where £45 for all 3 🙄
__________________
mick is offline   Reply With Quote
Old 17 April 2016, 15:47   #16
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,880
RIBase
Quote:
Originally Posted by mick View Post
Mine where £45 for all 3 🙄

Yup, same here.


Sh1t happens
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 17 April 2016, 17:21   #17
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by willk View Post
I use 50mm for the stern and bow tie down (blue?) and I have an orange one (75MM?) that I use as a run-on preventer.
I replaced some blue ones with orange ones (just because that was in the shop). I noticed they are much more visible and so less likely to be left on when launching - not that I would ever forget you realise ;-) They also make the whole boat/trailer seem more noticeable from behind/side which can't be a bad thing. Something to consider if there is little cost difference.
__________________
Poly is offline   Reply With Quote
Old 17 April 2016, 18:28   #18
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,681
Quote:
Originally Posted by Poly View Post
Something to consider if there is little cost difference.
Aye - they're certainly better - but I'd have to consider the implications of rocking up in Cushendall in front of four orange bands....
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 17 April 2016, 18:31   #19
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by willk View Post
Aye - they're certainly better - but I'd have to consider the implications of rocking up in Cushendall in front of four orange bands....

Ploughboy eh?
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 17 April 2016, 20:21   #20
Member
 
Country: UK - England
Town: Southampton
Boat name: SMH Rib / War Shot
Make: Ribtec / Scorpion
Length: 4m +
Engine: 100hp Yam/150hp opt
Join Date: Sep 2003
Posts: 2,069
RIBase
http://pages.ebay.com/link/?nav=item...d=360586997787
__________________
Searider is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Member's RIBs

SIB

Dibbles

SR6M

Gynner
Add your RIB


All times are GMT. The time now is 18:01.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.