Go Back   RIBnet Forums > RIB talk > Trailers & towing
Click Here to Login

Reply
 
Thread Tools Search this Thread
 
Old 09 April 2013, 19:58   #1
Member
 
ppenman's Avatar
 
Country: UK - England
Town: Wickford, Essex
Boat name: Wanderer
Make: Ribeye, Zodiac FR
Length: 7m +
Engine: Yamaha F300, 25 2S
MMSI: 235095667
Join Date: Aug 2010
Posts: 219
TYRE PUNCTURE SEALANT for trailer tyres

Hi,

I just wondered if anybody has had any experience of using TYRE PUNCTURE SEALANT on their boat trailer tyres. I thought it might prevent the worry of getting a puncture at speed on the motorway. The adds for TYRE MAGIC PUNCTURE SEALANT states that it can be used for caravan's so presumably boats should be ok.
__________________
ppenman is offline   Reply With Quote
Old 09 April 2013, 21:06   #2
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Don't think I would bother I think would rather now i had a puncture
__________________
mick is offline   Reply With Quote
Old 09 April 2013, 21:12   #3
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
This stuff is brilliant,
Genuine Ultraseal GB, Ultraseal UK, puncture, punctures, prevention, tyres, tyre, motorbike, tyre sealant, Ultraseal, Ultra Seal GB, Ultraseal USA - Tyre Conditioner.

Used it on motorcycles, horse and boat trailers.

Buy the correct amount, lower tyre pressure and load into tyre through inflation tube and then pump back up, when all done drive for 10 mins to get fluid/gel around tyre and leave for good. Tyre pressures hold, dont deflate on punctures and meant to be brilliant of blow outs.

http://www.ultrasealgb.co.uk/site/in...page&PAGE_id=5
__________________
C2 RIBS is offline   Reply With Quote
Old 09 April 2013, 21:13   #4
Member
 
A1an's Avatar
 
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,896
RIBase
Will you put it in your car tyres too?
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
A1an is offline   Reply With Quote
Old 09 April 2013, 21:18   #5
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
Quote:
Originally Posted by A1an View Post
Will you put it in your car tyres too?
Maybe on a low profile, I was sold the stuff years ago when it was a purple colour for motorcycling. One of the shows was amazing, prevents a tyre blow out. So then kept buying it for trailers and horse trailers as I did not want blow out with horses aboard. Kept using it. Think all mine have had it for ten years or more and never suffered a tyre failure. ( I have on a low profile on sports car without it)
__________________
C2 RIBS is offline   Reply With Quote
Old 09 April 2013, 21:24   #6
Member
 
A1an's Avatar
 
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,896
RIBase
Quote:
Originally Posted by C2 RIBS View Post

Maybe on a low profile, I was sold the stuff years ago when it was a purple colour for motorcycling. One of the shows was amazing, prevents a tyre blow out. So then kept buying it for trailers and horse trailers as I did not want blow out with horses aboard. Kept using it. Think all mine have had it for ten years or more and never suffered a tyre failure. ( I have on a low profile on sports car without it)
To me that's the only way to do it, no point just doing the trailer if the rest of the tyres haven't got it too.
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
A1an is offline   Reply With Quote
Old 09 April 2013, 21:26   #7
Member
 
mick's Avatar
 
Country: UK - England
Town: Wakefield
Boat name: Bouncer
Make: Redbay Stormforce
Length: 6m +
Engine: 2x Honda 100 Hp
MMSI: 235025718
Join Date: Jun 2009
Posts: 4,175
Another option is the tyron bands
__________________
mick is offline   Reply With Quote
Old 10 April 2013, 09:07   #8
Member
 
nugent's Avatar
 
Country: UK - England
Town: Bromsgrove
Boat name: Kick-Ass !
Make: PAC/Artic 22
Length: 6m +
Engine: 250hp Yamaha
Join Date: Nov 2003
Posts: 3,572
Put some in my ace quad once


Kin ell talk about bad wheel balance shoke like nothing else on earth, ruined the ride big time, soon was removed
I would imagine a tailer would do the same
__________________
˜™
MY BIGGEST WORRY IS THAT MY WIFE(WHEN I"M DEAD)WILL SELL MY TOY'S FOR WHAT I SAID I PAID FOR THEM.
nugent is offline   Reply With Quote
Old 10 April 2013, 11:53   #9
Member
 
Country: UK - England
Town: Chesterfield
Boat name: Sea Quell
Make: Picton Cobra
Length: 5m +
Engine: Mercury 150 4 Stroke
MMSI: 235038298
Join Date: Sep 2003
Posts: 1,095
Quote:
Originally Posted by C2 RIBS View Post
This stuff is brilliant,
Genuine Ultraseal GB, Ultraseal UK, puncture, punctures, prevention, tyres, tyre, motorbike, tyre sealant, Ultraseal, Ultra Seal GB, Ultraseal USA - Tyre Conditioner.

Used it on motorcycles, horse and boat trailers.

Buy the correct amount, lower tyre pressure and load into tyre through inflation tube and then pump back up, when all done drive for 10 mins to get fluid/gel around tyre and leave for good. Tyre pressures hold, dont deflate on punctures and meant to be brilliant of blow outs.

Video - Genuine Ultraseal GB, Ultraseal UK, puncture, punctures, prevention, tyres, tyre, motorbike, tyre sealant, Ultraseal, Ultra Seal GB, Ultraseal USA - Tyre Conditioner.
Done and used the same on mine for years. Just seems a sensible precaution on a single axle trailer with a very precious load !
Jeff
__________________
Jeff is offline   Reply With Quote
Old 10 April 2013, 12:06   #10
Member
 
Country: UK - England
Town: Hamble
Length: 9m +
Join Date: Dec 2002
Posts: 2,317
The problem with sealents is finding someone to repair the tyre afterwards. Most places won't touch it once it's had sealent in it.
__________________
It is better to remain silent and be thought a fool, than to speak and remove all doubt!
Dirk Diggler is offline   Reply With Quote
Old 10 April 2013, 13:42   #11
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
Quote:
Originally Posted by Dirk Diggler View Post
The problem with sealents is finding someone to repair the tyre afterwards. Most places won't touch it once it's had sealent in it.
Interesting as over fifteen years I have never experienced a problem and have had numerous tyre changes on m/cycles. Also with the stuff I used, no repairs should be needed just replace when worn out has been my experiences
__________________
C2 RIBS is offline   Reply With Quote
Old 10 April 2013, 14:25   #12
Member
 
Country: UK - England
Town: Chesterfield
Boat name: Sea Quell
Make: Picton Cobra
Length: 5m +
Engine: Mercury 150 4 Stroke
MMSI: 235038298
Join Date: Sep 2003
Posts: 1,095
Quote:
Originally Posted by Dirk Diggler View Post
The problem with sealents is finding someone to repair the tyre afterwards. Most places won't touch it once it's had sealent in it.
Apparently / allegedly the use of Utraseal does not affect repairs if they are needed.
All I know is - warn the tyre fitter the wheel has it in when changing tyres because it goes everywhere when they break the bead seal
Blue/green gunge
__________________
Jeff is offline   Reply With Quote
Old 11 April 2013, 20:24   #13
Member
 
ppenman's Avatar
 
Country: UK - England
Town: Wickford, Essex
Boat name: Wanderer
Make: Ribeye, Zodiac FR
Length: 7m +
Engine: Yamaha F300, 25 2S
MMSI: 235095667
Join Date: Aug 2010
Posts: 219
Well, it looks like most replies are positive so I guess I'll be getting some. Thanks for all your replies.


Peter.
__________________
ppenman is offline   Reply With Quote
Old 12 April 2013, 10:05   #14
Member
 
Adamn's Avatar
 
Country: UK - England
Town: Helston
Boat name: Myrtle
Make: Zodiac pro 500
Length: 4m +
Engine: Outboard 60hp
Join Date: Sep 2012
Posts: 259
This sealant sounds good. I cannot find out on the website how much it is? Any idea. I have some cracking on my trailer tyres due to UV light and the fact the tyres are 5 years old.
Would it be better to renew the tyre instead? A new tyre for a 10inch rim costs between £35-40! A new wheel and tyre £58
Any thoughts greatly received.
__________________
Adamn is offline   Reply With Quote
Old 12 April 2013, 10:20   #15
Member
 
kerny's Avatar
 
Country: UK - England
Town: Ashton-under-Lyne Lancs
Boat name: IMOGEN
Make: Air-Craft 5.4
Length: 5m +
Engine: Suzuki df70a
MMSI: 235087492
Join Date: May 2010
Posts: 7,078
RIBase
Send a message via Skype™ to kerny
The cracks on the tyres are not a good sign, I would definitely replace the tyres also if your rims are rusty and well used for the extra 18 quid or so I would get the new wheels with tyres.
__________________
Member of S.A.B.S. (Lancashire Division)
kerny is offline   Reply With Quote
Old 12 April 2013, 12:12   #16
Member
 
Country: UK - England
Town: Chesterfield
Boat name: Sea Quell
Make: Picton Cobra
Length: 5m +
Engine: Mercury 150 4 Stroke
MMSI: 235038298
Join Date: Sep 2003
Posts: 1,095
Quote:
Originally Posted by Adamn View Post
This sealant sounds good. I cannot find out on the website how much it is? Any idea. I have some cracking on my trailer tyres due to UV light and the fact the tyres are 5 years old.
Would it be better to renew the tyre instead? A new tyre for a 10inch rim costs between £35-40! A new wheel and tyre £58
Any thoughts greatly received.
Definitely replace the tyres - and agree with Kerny, the rims too if corroded.

Here are a couple of linky's for 'ultraseal'

Puncturesafe ultraseal puncture prevention | eBay

Ultraseal Tyre Repair Tire seal Puncturesafe Sealant Puncture safe Fix Guarantee | eBay

Jeff
__________________
Jeff is offline   Reply With Quote
Old 12 April 2013, 14:29   #17
Member
 
Country: UK - England
Town: Surrey
Boat name: Fugly & Rokraider 1
Make: Pac 22 & Porter 6.5
Length: 6m +
Engine: Ford 250 & jet,DT140
Join Date: Jun 2008
Posts: 681
I am with Nugent on this. I had some in the tyres on my tricked up Defender on test. Whilst going round the right hand bend going South on the A3, where it meets the A27, I was in the middle lane doing 80ish. Halfway round the bend the steering suddenly went nuts and I actually thought I had had a blow out. Turns out it was the sealant in the tyres. It stays liquid and sloshes round the inside of the tyre. Whilst cornering, it had accumulated in one spot on the side wall and travelled round the tyre as a mass, throwing the balance out big time! Luckily there were no other cars around me as I needed all 3 lanes whilst desperately scrubbing some speed off.
I think it works well if the vehicle is doing low speeds, up to 50? Beyond that it becomes a bit of a gamble.
The other potential issue is when the rims and tyres on the trailer are in crumbly condition, where the salt has got at them, the sealant will continue sealing the cracks when the construction is failing, resulting in a structual failure, rather than just a blowout.
__________________
Rokraider is offline   Reply With Quote
Old 12 April 2013, 14:39   #18
Member
 
kerny's Avatar
 
Country: UK - England
Town: Ashton-under-Lyne Lancs
Boat name: IMOGEN
Make: Air-Craft 5.4
Length: 5m +
Engine: Suzuki df70a
MMSI: 235087492
Join Date: May 2010
Posts: 7,078
RIBase
Send a message via Skype™ to kerny
Perhaps the best option would be to fit steel radial tyres, at least it gives some sort protection rather than putting gunk inside the tyres.
__________________
Member of S.A.B.S. (Lancashire Division)
kerny is offline   Reply With Quote
Old 12 April 2013, 14:47   #19
RIBnet supporter
 
C2 RIBS's Avatar
 
Country: UK - England
Town: Hants
Length: 8m +
Engine: 300hp plus
Join Date: Sep 2007
Posts: 3,072
Quote:
Originally Posted by kerny View Post
Perhaps the best option would be to fit steel radial tyres, at least it gives some sort protection rather than putting gunk inside the tyres.
The tyres that are cracking I would defo replace, but I would still put the gear into the tyre, saves so much time and problems. We have seen blow outs where tyre held to run down when the tyre normally would have thrown trailer. Also on Mbike a no brainer as it stops blow outs and therefore saves my life for £20. I really trust this gear, gunk or not and never had atyre fitter with a problem with it ( but as said before I warned them)
__________________
C2 RIBS is offline   Reply With Quote
Old 12 April 2013, 14:57   #20
Member
 
kerny's Avatar
 
Country: UK - England
Town: Ashton-under-Lyne Lancs
Boat name: IMOGEN
Make: Air-Craft 5.4
Length: 5m +
Engine: Suzuki df70a
MMSI: 235087492
Join Date: May 2010
Posts: 7,078
RIBase
Send a message via Skype™ to kerny
Quote:
Originally Posted by C2 RIBS View Post
The tyres that are cracking I would defo replace, but I would still put the gear into the tyre, saves so much time and problems. We have seen blow outs where tyre held to run down when the tyre normally would have thrown trailer. Also on Mbike a no brainer as it stops blow outs and therefore saves my life for £20. I really trust this gear, gunk or not and never had atyre fitter with a problem with it ( but as said before I warned them)
Sorry!! I didn't mean to discredit the product by using the word gunk, I just came out as I was typing
__________________
Member of S.A.B.S. (Lancashire Division)
kerny is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 10:39.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.