Reply
 
Thread Tools Search this Thread
 
Old 17 December 2013, 21:38   #1
Member
 
lukewhiting's Avatar
 
Country: UK - England
Town: swanage
Make: Thundercat
Length: 4m +
Engine: Tohatsu 50
Join Date: Apr 2012
Posts: 968
Towbars

Getting a towbar fitted to my car so I can finally tow the boat myself! The cheapest quote I have so far is from dolphin trailers in poole (£185) I've tried most of the mobile services and local garages but most are over £200.

Does anybody know of anywhere else in poole that might be cheaper?
__________________
lukewhiting is offline   Reply With Quote
Old 17 December 2013, 21:42   #2
Member
 
simon23's Avatar
 
Country: UK - England
Town: liverpool
Make: tohatsu6.1 one desig
Length: 6m +
Engine: mariner 125hp
Join Date: Jan 2012
Posts: 357
Thats not a bad price if it incudes the electrics
__________________
simon23 is offline   Reply With Quote
Old 17 December 2013, 22:58   #3
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by simon23 View Post
Thats not a bad price if it includes the electrics
Yip, I doubt you'll get significantly cheaper I've had 4 fitted over the years on a range of cars and I don't remember any being much less than that, and most a bit more. You can DIY it, but I've always concluded it wasn't worth it for the hassle / confidence in it factor.
__________________
Poly is offline   Reply With Quote
Old 17 December 2013, 23:25   #4
RIBnet admin team
 
Nos4r2's Avatar
 
Country: UK - England
Town: The wilds of Wiltshire
Boat name: Dominator
Make: SR5.4
Length: 7m +
Engine: Yam 85
MMSI: 235055163
Join Date: Jul 2005
Posts: 13,054
RIBase
Tried Ambrow in Christchurch?
__________________
Need spares,consoles,consumables,hire,training or even a new boat?

Please click HERE and HERE and support our Trade Members.

Join up as a Trade member or Supporter HERE
Nos4r2 is offline   Reply With Quote
Old 18 December 2013, 07:06   #5
Member
 
Country: UK - England
Town: Sussex
Make: RIBTEC 655
Length: 6m +
Engine: Yam 150
Join Date: Oct 2007
Posts: 1,160
I'd go reputable rather than cheap, what you save now you could spend later on sorting out hashed electrics.
__________________
thomas is offline   Reply With Quote
Old 18 December 2013, 07:30   #6
Member
 
Trimix's Avatar
 
Country: UK - England
Boat name: Hysucat
Make: Hysucat
Length: 8m +
Engine: Twin Suzuki 175's
MMSI: 235102645
Join Date: Jun 2013
Posts: 861
RIBase
I fitted my own, which is not rocket science - but it takes time and you will pay for labour. If you get a cheap quote they will have to cut corners somewhere and end up doing a rushed / shoddy job.

The electrics are fiddly, you can save time by using poor connectors which will fail soon after you have paid for the job.

I paid about £200+ so your quote is pretty cheap. Just ask them how they do the electrics and watch them do it.
__________________
Trimix is offline   Reply With Quote
Old 18 December 2013, 07:52   #7
Member
 
Country: UK - England
Town: Plymouth
Length: 10m +
Join Date: Nov 2007
Posts: 367
I would echo the comments above. I don't think you will get it done for much less than that unless you do it yourself. I have fitted several towbars in the past. Bolting them on is relatively straightforward, but the electrics on modern vehicles are becoming a complete nightmare. My current towbar I had professionally fitted for just over £200.
__________________
South West Boat Transport
Professional Boat Transport across England, Wales, Scotland, Europe & Scandinavia. Any boat up to 50ft.
https://www.boat-transportation.co.uk
SW Boat Transport is offline   Reply With Quote
Old 18 December 2013, 07:54   #8
Member
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,408
Luke, what car are you fitting the towbar to, makes a difference to the advice? for instance, if it's a landrover, buy the kit and fit it yourself, but if it's something with cambus wiring and no connection to plu straight into, then pay for the fitting but as previously stated, watch what they do and make sure they use proper connections and not them horrible quick connectors
__________________
Chris Caton is offline   Reply With Quote
Old 18 December 2013, 09:32   #9
Member
 
steco1958's Avatar
 
Country: UK - England
Town: West Bromwich
Boat name: Ellie V
Make: Excel Voyager 520
Length: 5m +
Engine: Evinrude 75 HP
MMSI: 235 908 287
Join Date: May 2012
Posts: 689
Quote:
Originally Posted by Chris Caton View Post
Luke, what car are you fitting the towbar to, makes a difference to the advice? for instance, if it's a landrover, buy the kit and fit it yourself, but if it's something with cambus wiring and no connection to plu straight into, then pay for the fitting but as previously stated, watch what they do and make sure they use proper connections and not them horrible quick connectors
Absolutely, +1


I paid over £300 to have mine installed, I have fitted loads myself but at the time, I had none (time that is), so I sat back and allowed someone else to do it.

No regrets on spending the money
__________________
steco1958 is offline   Reply With Quote
Old 18 December 2013, 10:03   #10
Member
 
Trimix's Avatar
 
Country: UK - England
Boat name: Hysucat
Make: Hysucat
Length: 8m +
Engine: Twin Suzuki 175's
MMSI: 235102645
Join Date: Jun 2013
Posts: 861
RIBase
There are some jobs that are simple, but turn out to be a right pain to do.

Towbars easily fall into that category.

I fitted my towbar, but crawling about under the van in the dark, getting mud and grit in my eyes. Then taking the bumper off and breaking the daft plastic clips that hold the trim on, then finding the wiring harness plug in was for the wrong year and having to re-order it, then finding the fog light blinked instead of the indicators.

So, sometimes its just easier to pay someone.
__________________
Trimix is offline   Reply With Quote
Old 18 December 2013, 10:43   #11
Member
 
Barrowboy's Avatar
 
Country: Ireland
Town: Galway
Boat name: Top Banana
Make: Scorpion 9m
Length: 9m +
Engine: Yamaha 421STI
MMSI: Yeah right!
Join Date: Jul 2013
Posts: 1,164
RIBase
Pay someone to do it!

Believe me, there is nothing worse than reversing your pride and joy round a corner and down a slipway with the high-pitched reverse gear parking-aid sensor siren going off constantly because you've been unable to work out how to disable it when the trailer's hitched up!
__________________
Barrowboy is offline   Reply With Quote
Old 18 December 2013, 11:12   #12
Member
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,408
Quote:
Originally Posted by Barrowboy View Post
Pay someone to do it!

Believe me, there is nothing worse than reversing your pride and joy round a corner and down a slipway with the high-pitched reverse gear parking-aid sensor siren going off constantly because you've been unable to work out how to disable it when the trailer's hitched up!
read the instructions Tony, you know it makes sense
__________________
Chris Caton is offline   Reply With Quote
Old 18 December 2013, 12:17   #13
Member
 
Country: UK - Scotland
Town: Argyll
Boat name: Helena
Make: Birchwood
Length: 5m +
Engine: Inboard Diesel 250hp
Join Date: Jun 2011
Posts: 116
I agree with all of the above comments. Not worth the hassle and don't get it done on the cheap. Especially now that towbars and wiring are now part of an MOT. Could end up with a fail and then have to pay plenty to get it fixed in time for a retest.
__________________
peterwhite is offline   Reply With Quote
Old 18 December 2013, 13:18   #14
Member
 
Barrowboy's Avatar
 
Country: Ireland
Town: Galway
Boat name: Top Banana
Make: Scorpion 9m
Length: 9m +
Engine: Yamaha 421STI
MMSI: Yeah right!
Join Date: Jul 2013
Posts: 1,164
RIBase
Quote:
Originally Posted by Chris Caton View Post
read the instructions Tony, you know it makes sense
Funny that. Exactly what the Leader of the Opposition said so there was absolutely NO CHANCE of that happening........until I was alone in the man cave a couple of days later!
__________________
Barrowboy is offline   Reply With Quote
Old 18 December 2013, 13:35   #15
Member
 
Chris Caton's Avatar
 
Country: UK - England
Town: Wirral & Caernarfon
Boat name: That's Enuff
Make: Revenger & Avon SR4
Length: 7m +
Engine: Honda 150HP & 50HP
Join Date: Jul 2011
Posts: 4,408
Quote:
Originally Posted by Barrowboy View Post
Funny that. Exactly what the Leader of the Opposition said so there was absolutely NO CHANCE of that happening........until I was alone in the man cave a couple of days later!
good stuff
__________________
Chris Caton is offline   Reply With Quote
Old 20 December 2013, 22:39   #16
Member
 
Country: UK - England
Town: bedford
Make: tornado
Length: 5m +
Engine: outboard 60hp merc
Join Date: Oct 2007
Posts: 328
Quote:
Originally Posted by lukewhiting View Post
Getting a towbar fitted to my car so I can finally tow the boat myself! The cheapest quote I have so far is from dolphin trailers in poole (£185) I've tried most of the mobile services and local garages but most are over £200.

Does anybody know of anywhere else in poole that might be cheaper?
Another take is buy the bits from towsure, fit the metal work yourself which maybe very simple and then have a local motor factor do the electrics for you. It maybe significantly cheaper but you need to price it up. My neighbour did just this recently and saved a fair bit of cash, he also painted up the metal work and made sure it was well protected against rusting.

Just a thought
Dave j
__________________
davej is offline   Reply With Quote
Old 20 December 2013, 23:18   #17
Member
 
A1an's Avatar
 
Country: UK - Scotland
Town: Fort William
Make: Ribcraft 585
Length: 5m +
Engine: Yamaha F115
Join Date: Mar 2012
Posts: 2,896
RIBase
Quote:
Originally Posted by lukewhiting View Post
Getting a towbar fitted to my car so I can finally tow the boat myself! The cheapest quote I have so far is from dolphin trailers in poole (£185) I've tried most of the mobile services and local garages but most are over £200.

Does anybody know of anywhere else in poole that might be cheaper?
£185 fitted?

Bargain!

I just paid £200 for the metalwork alone.
__________________
There is a place on this planet for all of Gods creatures.........right next to my tatties and gravy.
A1an is offline   Reply With Quote
Old 20 December 2013, 23:44   #18
Member
 
lukewhiting's Avatar
 
Country: UK - England
Town: swanage
Make: Thundercat
Length: 4m +
Engine: Tohatsu 50
Join Date: Apr 2012
Posts: 968
Booked it in with dolphin trailers tommorow morning! Had a chat with the guy and he seemed pretty good.

They've got a great shop in there filled with snipe trailers & all parts plus loads more! Worth a look for anyone on here id say
__________________
lukewhiting is offline   Reply With Quote
Old 21 December 2013, 09:03   #19
RIBnet admin team
 
Poly's Avatar
 
Country: UK - Scotland
Boat name: imposter
Make: FunYak
Length: 3m +
Engine: Tohatsu 30HP
MMSI: 235089819
Join Date: Sep 2005
Posts: 11,622
Quote:
Originally Posted by davej View Post
Another take is buy the bits from towsure, fit the metal work yourself which maybe very simple and then have a local motor factor do the electrics for you. It maybe significantly cheaper but you need to price it up. My neighbour did just this recently and saved a fair bit of cash, he also painted up the metal work and made sure it was well protected against rusting.

Just a thought
Dave j
The electrics aren't necessarily the worst bit (although to do it right young luke might need tools he doesn't have). As someone said above the instructions assume you know what you are doing and will say "remove bumper" - which to the uninitiated involves snapping bits off so it never goes back on properly! Many installations also involve cutting a whole in the bumper which is a PITA and not necessarily a job for the beginner.
__________________
Poly is offline   Reply With Quote
Old 21 December 2013, 09:18   #20
Member
 
Country: UK - England
Town: Dorset & Hants
Boat name: Streaker/Orange
Make: Avon/Ribcraft
Length: 4m +
Engine: 50Yam/25 Mariner
Join Date: Apr 2007
Posts: 5,551
Quote:
Originally Posted by lukewhiting View Post
Booked it in with dolphin trailers tommorow morning! Had a chat with the guy and he seemed pretty good.

They've got a great shop in there filled with snipe trailers & all parts plus loads more! Worth a look for anyone on here id say
Excellent news! No excuse not to tow to lymington and go to yarmouth for nachos on 5th Jan! :-)
__________________
PeterM is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 15:59.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.