Reply
 
Thread Tools Search this Thread
 
Old 14 November 2014, 21:31   #1
Member
 
csjukes's Avatar
 
Join Date: Aug 2012
Posts: 86
Corsa gear crunching?

Right I know its for RIBs this app but Ive exhausted the internet and want to hear some opinions. Its a 2003 vauxhall corsa 1.0 which I bought 4 weeks ago, when starting and for first 10 mins it is very hard to get into first gear. After that its fine and slots in. I still wouldnt say all the gears slot in nicely but they are fine after first. So any ideas whats wrong? I reckon gear linkage, or maybe just lubricating??

Thanks


Sent from my iPhone using RIB Net
__________________
csjukes is offline   Reply With Quote
Old 14 November 2014, 21:36   #2
RIBnet supporter
 
bartiny's Avatar
 
Country: UK - England
Town: Accrington
Length: no boat
Join Date: Oct 2012
Posts: 451
Gearbox oil level?

Or have you power washed the engine/gearbox?

Any water ingress into the gearbox will knack the syncromesh's.
__________________
bartiny is offline   Reply With Quote
Old 14 November 2014, 21:59   #3
RIBnet supporter
 
bartiny's Avatar
 
Country: UK - England
Town: Accrington
Length: no boat
Join Date: Oct 2012
Posts: 451
Is your biting point on your clutch near the top?

A good test is to; start the car, engage 3rd gear, apply handbrake see if you can make the clutch slip at about 2,000 rpm.

If the handbrake is not much good you will have to 'heel and toe'

__________________
bartiny is offline   Reply With Quote
Old 15 November 2014, 06:14   #4
Member
 
spartacus's Avatar
 
Country: UK - Scotland
Town: Aberdeenshire
Boat name: Sula
Make: Ribcraft 4.8m
Length: 4m +
Engine: Tohatsu 70hp + aux
MMSI: 235087213
Join Date: Jun 2007
Posts: 4,534
RIBase
Changing the gear oil won't do any harm. Always pull the fill plug before the drain plug. Sometimes it needs a special adaptor tool.

Regards gear shift - not familiar with Vauxhall, but linkage can be adjusted on 5-speed VAG vehicles such as Audi, VW, etc. Link here:

As far as I can determine if you lift the gaiter on the gearshift and there will be a hole that aligns that you can lock. Then you can adjust any slack at transmission end. Look at post mid way down on this form chat: gear linkage setup
__________________
Is that with or without VAT?
spartacus is offline   Reply With Quote
Old 15 November 2014, 07:33   #5
Member
 
csjukes's Avatar
 
Join Date: Aug 2012
Posts: 86
Thanks for replies.

In response, clutch is fine and has loads of wear left. Simply it feels like when you try to engage 1st something is blocking it, but then if you slam it to left and forward it usually goes in......


Sent from my iPhone using RIB Net
__________________
csjukes is offline   Reply With Quote
Old 15 November 2014, 09:05   #6
Member
 
Country: UK - England
Town: southampton
Boat name: hydradrive
Make: yamaha
Length: no boat
Engine: sterndrives
Join Date: Sep 2012
Posts: 290
Common fault with linkage wear
__________________
yam man is offline   Reply With Quote
Old 15 November 2014, 12:06   #7
Member
 
csjukes's Avatar
 
Join Date: Aug 2012
Posts: 86
Thanks for replies.

In response, clutch is fine and has loads of wear left. Simply it feels like when you try to engage 1st something is blocking it, but then if you slam it to left and forward it usually goes in......


Sent from my iPhone using RIB Net
__________________
csjukes is offline   Reply With Quote
Old 15 November 2014, 12:15   #8
Member
 
Country: UK - England
Town: Portsmouth
Boat name: Not sure
Make: ABC/Priddy
Length: 10m +
Engine: 2 x 500 FPT
Join Date: Jul 2001
Posts: 928
It's the clutch binding. It's nothing to do with wear. It's a common problem. Changing the oil with a blended type will look like the problem is fixed but the problem will come back. Alan P
__________________
Alan Priddy is offline   Reply With Quote
Old 15 November 2014, 17:15   #9
Member
 
csjukes's Avatar
 
Join Date: Aug 2012
Posts: 86
Online most seem to think its gear linkage which will cost about £100. How much would replacing the clutch binding cost


Sent from my iPhone using RIB Net
__________________
csjukes is offline   Reply With Quote
Old 15 November 2014, 20:22   #10
Member
 
Country: UK - England
Town: Portsmouth
Boat name: Not sure
Make: ABC/Priddy
Length: 10m +
Engine: 2 x 500 FPT
Join Date: Jul 2001
Posts: 928
Now we have the Internet we don't need specilists !!!. Replace the clutch and maybe flywheel
__________________
Alan Priddy is offline   Reply With Quote
Old 15 November 2014, 20:34   #11
Member
 
Barrowboy's Avatar
 
Country: Ireland
Town: Galway
Boat name: Top Banana
Make: Scorpion 9m
Length: 9m +
Engine: Yamaha 421STI
MMSI: Yeah right!
Join Date: Jul 2013
Posts: 1,164
RIBase
Quote:
Originally Posted by Alan Priddy View Post
Now we have the Internet we don't need specilists !!!. Replace the clutch and maybe flywheel
....then change the car!
__________________
Barrowboy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 23:38.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.