Reply
 
Thread Tools Search this Thread
 
Old 13 August 2006, 17:18   #1
Member
 
Country: USA
Town: Fernandina Beach
Length: 5m +
Engine: Diesel
Join Date: Aug 2006
Posts: 3
Need Help Identifying RIB

Hello,

I'm new to the board and need some help identifying a RIB my agency is acquiring from the USCG. I could not find a hull plate or any other manufacturers markings. The boat is approximately five meters in length and has a Yanmar Diesel engine with the water jet drive. Any information would be appreciated.

Jim
Attached Thumbnails
Click image for larger version

Name:	RIB.jpg
Views:	454
Size:	175.4 KB
ID:	21530  
__________________
jimn119 is offline   Reply With Quote
Old 13 August 2006, 19:29   #2
Member
 
Country: USA
Town: Fairfield
Boat name: Sunrider
Make: Zodiac
Length: 7.3
Engine: MerCruiser (bio)diesel 180hp I/O
Join Date: Jun 2002
Posts: 313
I believe that is an AMBAR, but not sure of the model...you can find info here:
http://www.silverships.com/products.asp?CatagoryID=4
__________________
sunrider is offline   Reply With Quote
Old 14 August 2006, 00:31   #3
Member
 
Country: USA
Town: Fernandina Beach
Length: 5m +
Engine: Diesel
Join Date: Aug 2006
Posts: 3
Great! Thanks for the info.

Jim
__________________
jimn119 is offline   Reply With Quote
Old 30 October 2006, 13:50   #4
Member
 
Country: USA
Town: boston
Boat name: Miss bad 61
Make: Crapko, AKA Mako
Length: 5m +
Engine: OMC Mod50
Join Date: Apr 2006
Posts: 398
could be an APEX
__________________
fast fred is offline   Reply With Quote
Old 30 October 2006, 13:56   #5
Member
 
Country: USA
Town: boston
Boat name: Miss bad 61
Make: Crapko, AKA Mako
Length: 5m +
Engine: OMC Mod50
Join Date: Apr 2006
Posts: 398
look up under all deck hatches with a mirror, should find id number, first three didgets will tell who made it
__________________
fast fred is offline   Reply With Quote
Old 30 October 2006, 16:18   #6
Member
 
Country: Other
Town: San Carlos, Mexico
Boat name: INDE
Make: LOMAC 730
Length: 7m +
Engine: 200 Merc.
MMSI: Please press 1
Join Date: May 2006
Posts: 1,688
Send a message via Skype™ to Limey Linda
Quote:
Originally Posted by jimn119 View Post
Hello,

I'm new to the board and need some help identifying a RIB my agency is acquiring from the USCG. I could not find a hull plate or any other manufacturers markings. The boat is approximately five meters in length and has a Yanmar Diesel engine with the water jet drive. Any information would be appreciated.

Jim
It is an Ambar. Used to be carried by USCG cutters. Good boat but very slow. There was one on Ebay recently.
__________________
Running around like a head with it's chicken cut off.
Limey Linda is offline   Reply With Quote
Old 30 October 2006, 17:48   #7
Member
 
Country: Other
Town: Christiansted.V.I.
Boat name: Froggy
Make: Avon SeaRider
Length: 4m +
Engine: Johnson 50
Join Date: Oct 2006
Posts: 312
Quote:
Originally Posted by Limey Linda View Post
It is an Ambar. Used to be carried by USCG cutters. Good boat but very slow. There was one on Ebay recently.
Ain't you the desert girl expert! I believe your limey roots given your knowlege of such. Are you shipwrecked out there or in the Maricopia County Jail?


Tomas
__________________
Tomas is offline   Reply With Quote
Old 30 October 2006, 23:24   #8
Member
 
Country: Other
Town: San Carlos, Mexico
Boat name: INDE
Make: LOMAC 730
Length: 7m +
Engine: 200 Merc.
MMSI: Please press 1
Join Date: May 2006
Posts: 1,688
Send a message via Skype™ to Limey Linda
Quote:
Originally Posted by Tomas View Post
Ain't you the desert girl expert! I believe your limey roots given your knowlege of such. Are you shipwrecked out there or in the Maricopia County Jail?


Tomas
Thanks, Tomas for your "polite" comments. Do you have manners in that "other" country
__________________
Running around like a head with it's chicken cut off.
Limey Linda is offline   Reply With Quote
Old 31 October 2006, 00:28   #9
Member
 
Country: USA
Town: Fernandina Beach
Length: 5m +
Engine: Diesel
Join Date: Aug 2006
Posts: 3
Thanks guys. How slow is slow?-Jim
__________________
jimn119 is offline   Reply With Quote
Old 31 October 2006, 01:04   #10
Member
 
Country: Other
Town: San Carlos, Mexico
Boat name: INDE
Make: LOMAC 730
Length: 7m +
Engine: 200 Merc.
MMSI: Please press 1
Join Date: May 2006
Posts: 1,688
Send a message via Skype™ to Limey Linda
Quote:
Originally Posted by jimn119 View Post
Thanks guys. How slow is slow?-Jim
I nearly purchased this specific boat a few months ago from the guy that bought it at a military surplus auction. Had quite a few E.Mail chats. Max. speed is no more than 25knts. light loaded. However, it does appear to be in quite good condition. Would make a good harbour patrol/ tug boat.
__________________
Running around like a head with it's chicken cut off.
Limey Linda is offline   Reply With Quote
Old 31 October 2006, 10:38   #11
Member
 
Country: USA
Town: boston
Boat name: Miss bad 61
Make: Crapko, AKA Mako
Length: 5m +
Engine: OMC Mod50
Join Date: Apr 2006
Posts: 398
lookin vary beamy from hear, with the jet setup bet she can float in just about anyware.
__________________
fast fred is offline   Reply With Quote
Old 31 October 2006, 11:35   #12
Member
 
Country: Other
Town: Christiansted.V.I.
Boat name: Froggy
Make: Avon SeaRider
Length: 4m +
Engine: Johnson 50
Join Date: Oct 2006
Posts: 312
Quote:
Originally Posted by Limey Linda View Post
Thanks, Tomas for your "polite" comments. Do you have manners in that "other" country
Sorry Linda...I was actually impressed and curious about your "desert" location. If my humor is too dry for a Brit. possibly I belong in the desert.....

T
__________________
Tomas is offline   Reply With Quote
Old 31 October 2006, 11:50   #13
Member
 
Country: Other
Town: San Carlos, Mexico
Boat name: INDE
Make: LOMAC 730
Length: 7m +
Engine: 200 Merc.
MMSI: Please press 1
Join Date: May 2006
Posts: 1,688
Send a message via Skype™ to Limey Linda
Quote:
Originally Posted by Tomas View Post
Sorry Linda...I was actually impressed and curious about your "desert" location. If my humor is too dry for a Brit. possibly I belong in the desert.....

T
Thats Ok Tomas. We have been boat owners for 30 years. We use the huge AZ lakes ( Mead, Powell, Pleasant etc.) and trailer to the Sea of Cotez , Mexico. 4 hours drive. Last time a checked there were more boats per capita in AZ than any other state. Surprising is it not.
__________________
Running around like a head with it's chicken cut off.
Limey Linda is offline   Reply With Quote
Old 31 October 2006, 16:28   #14
Member
 
Country: Other
Town: Christiansted.V.I.
Boat name: Froggy
Make: Avon SeaRider
Length: 4m +
Engine: Johnson 50
Join Date: Oct 2006
Posts: 312
The boat numbers in Az are a surprise to me as well as you being able to find ocean within four hours! Still....it's a good call on the Ambar from the desert SW! I used to do a lot of offshore work fishing with a guy name Pete and we'd see a big salty just breaking the horizon and I'd go, "Container Vessel...Panamax". Pete would reply, "Nope....VLCC", and would always be correct. He could spot a Coast Guard Frigate before it broke the horizon but I won't go into any of that.....

Anyway, keep the cactus spines out of your hypalon and I'll try to clean up my compliments!

The photo should make you feel at home. This is in the Goat Hills East End St. Croix. Twenty-Two miles West you're in a rain forest.

Tomas
Attached Thumbnails
Click image for larger version

Name:	IMG_0092_1.JPG
Views:	192
Size:	121.0 KB
ID:	22926  
__________________
Tomas is offline   Reply With Quote
Old 12 November 2006, 16:49   #15
Member
 
Country: USA
Town: Grand Island
Boat name: MU1
Make: Zodiac
Length: 5m +
Engine: Outboard
Join Date: Apr 2005
Posts: 5
I may be your new best friend...

The boat you are looking at in the picture is an AMBAR 550.
The length overall in 17'.
It's powerplant is a Yanmar Diesel with a Jet Dive.
These were used as deck boats on the USCG 87' Cutters.
The boat will fly alond at about 20-25 mph with one or two people on in. If you put 3 or more on it, it slows waaay down.

My Department aquired one last year, and I have been spending the last year tracking down information on this boat. Our boat was on a USCG Cutter out of Cape May New Jersey.

We were having some problems with it overheating, and we were able to solve the problems by AGGRESIVELY flushing the cooling system and switching coolants. If you are having trouble with overheating, let me know before you spend any money, and I will send you some information and links that you should find helpful.

I was able to track down the waterjet manufacturer. we needed a new skeg, and were able to buy the parts and service manual for twenty bucks.

Feel free to contact me if you need any further info.

Stephen
__________________
GIFCo147 is offline   Reply With Quote
Old 14 November 2006, 00:39   #16
Member
 
Country: USA
Town: Punta gorda Fl.
Boat name: War Machine
Make: Falcon U.S.A.
Length: 9m +
Engine: twin 250 Yamaha
Join Date: Jan 2006
Posts: 936
Quote:
Originally Posted by Tomas View Post
The boat numbers in Az are a surprise to me as well as you being able to find ocean within four hours! Still....it's a good call on the Ambar from the desert SW! I used to do a lot of offshore work fishing with a guy name Pete and we'd see a big salty just breaking the horizon and I'd go, "Container Vessel...Panamax". Pete would reply, "Nope....VLCC", and would always be correct. He could spot a Coast Guard Frigate before it broke the horizon but I won't go into any of that.....

Anyway, keep the cactus spines out of your hypalon and I'll try to clean up my compliments!

The photo should make you feel at home. This is in the Goat Hills East End St. Croix. Twenty-Two miles West you're in a rain forest.

Tomas
Tomas, from the picture, it appears you have it... dare I say it? KNOCKED! I would practically kill for a little sunshine and warm days....
__________________
pathalla is offline   Reply With Quote
Old 14 November 2006, 01:41   #17
Member
 
Country: Other
Town: San Carlos, Mexico
Boat name: INDE
Make: LOMAC 730
Length: 7m +
Engine: 200 Merc.
MMSI: Please press 1
Join Date: May 2006
Posts: 1,688
Send a message via Skype™ to Limey Linda
Today in Phoenix, AZ, low night temp. 60 deg. F. Daytime 85 deg. F.
Eat your heart out !!!! Still wearing shorts and T shirt and have the A/C just ticking over. If anyone want's to tell me to P off that's OK.
__________________
Running around like a head with it's chicken cut off.
Limey Linda is offline   Reply With Quote
Old 14 November 2006, 13:24   #18
Member
 
Country: Other
Town: Christiansted.V.I.
Boat name: Froggy
Make: Avon SeaRider
Length: 4m +
Engine: Johnson 50
Join Date: Oct 2006
Posts: 312
Pathalla....

There is a price to be paid for everything but I ain't complaining. You know I don't mind the cold it's the gray and wet days that cause me to stay way down here.

"Everything's broken and nobody speaks english"

Tomas
__________________
Tomas is offline   Reply With Quote
Old 14 November 2006, 15:01   #19
Member
 
Country: Canada
Town: Tobermory, Canada eh
Boat name: Verius
Make: Zodiac Hurricane 590
Length: 5m +
Engine: Yamaha F150
Join Date: Oct 2006
Posts: 1,366
Send a message via MSN to Stoo
Quote:
Originally Posted by Limey Linda View Post
If anyone want's to tell me to P off that's OK.
P Off!

It's freezing rain here.. about 1 deg. C... and likely to stay this way all week...
__________________
Pump it up and RIDE!

www.wetspotimages.com
Stoo is offline   Reply With Quote
Old 14 November 2006, 17:01   #20
Member
 
Country: Other
Town: Christiansted.V.I.
Boat name: Froggy
Make: Avon SeaRider
Length: 4m +
Engine: Johnson 50
Join Date: Oct 2006
Posts: 312
Quote:
Originally Posted by Stoo View Post
P Off!

It's freezing rain here.. about 1 deg. C... and likely to stay this way all week...

Ouch Stoo...thats a tough report. Throw another log on the fire!
__________________
Tomas is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 22:14.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.