733 Zodiac Hurricane

HurricaneZodiac · 23 December 2015, 15:49

Looking for a tube that will fit on a 1999 733 Hurricane. My tube is not in bad shape just worn under the cones. Anyone have a suggestion? No one seems to want to tackle the repair.

office888 · 23 December 2015, 17:51

Quote:

Originally Posted by HurricaneZodiac

Looking for a tube that will fit on a 1999 733 Hurricane. My tube is not in bad shape just worn under the cones. Anyone have a suggestion? No one seems to want to tackle the repair.

How badly blown out is it?

FYI, stern transverse seam damage is caused by underinflation. It is vital to maintain the factory recommended pressure of 3.48 psi / 240 mb.

HurricaneZodiac · 23 December 2015, 18:35

This is the worst side. It was previously repaired.

office888 · 23 December 2015, 18:37

Ouch, material delamination... You could gluetex and patch over it, but really, if this problem is systemic, I would consider a new tube.

cgoing · 24 December 2015, 12:11

Just something to keep in mind. Not all 733 tubes are interchangeable. I have had a few customers find that out the hard way after purchasing a tube.

HurricaneZodiac · 24 December 2015, 13:13

Thanks I have read that. Do you know if there is any way to verify a match? Was it year of boat mfg like say 98 to 05 or did they make different ones in the same year. I have had a replacement tube from CPI for a Almar I have and a friend did Wing. Both came out good. I was just hoping to find a decent used set but as you have pointed out this may be pretty risky. Any info you can give me would be greatly appreciated.
Thank You

jyasaki · 25 December 2015, 19:15

Quote:

Originally Posted by office888

Ouch, material delamination... You could gluetex and patch over it, but really, if this problem is systemic, I would consider a new tube.

Wasn't that what he was doing At the outset?

jky

cgoing · 27 December 2015, 01:06

I think the only ones who know for sure is the Hurricane factory. I am not aware of a specific production range or any other easy way to tell. For sure the pointed bow tubes do not fit a flat bow tubed hull.

tiverton_tom · 29 December 2015, 22:41

If you need a replacement built, try Silvio (fort lauderdale, FL)

https://www.facebook.com/Inflatable-...r_rs&pnref=lhc