Reply
 
Thread Tools Search this Thread
 
Old 14 April 2005, 17:11   #1
Member
 
Country: UK - England
Town: Fleet
Boat name: Mollie J
Make: Humber
Length: 6m +
Engine: 115HP Suzuki
MMSI: 235021476
Join Date: Apr 2005
Posts: 29
Security of Equipment

As a new Rib owner, I've spent a tidy sum on Navman kit (DSC radio, GPS, Fishfinder, Fuel flow meter & the like) all installed & working well.

With the exception of the radio which is flush mounted, the kit is all mounted on brackets & I remove it & take it away when the boat is off the water.

But I was wondering what you guys do when you're moored up, whilst say you pop to the pub for a bit of lunch, or go for a quick tour of the chandlery.

Do you unplug it all and hide it away? Or trust to luck? Or a console cover? Or is there a device like I have with my laptop (a Kensington lock it's called) which allows you to chain the kit to something solid whilst unattended. It's not foolproof, some decent boltcutters would get through it, but it's a deterrent.

Any thoughts or info. much appreciated

Russell
__________________
RussellH is offline   Reply With Quote
Old 14 April 2005, 17:57   #2
Member
 
Country: UK - England
Town: sunny south coast
Boat name: Pride of Bilboa
Length: 10m +
MMSI: 4
Join Date: Aug 2004
Posts: 521
If your thinking about a cable to thread through the toys, (like the things available for a pc), towsure do an alarmed cable. Ideal if anyone is with-in earshot..
__________________
tony
tcwozere is offline   Reply With Quote
Old 14 April 2005, 18:11   #3
TIM
Member
 
Country: Ireland
Town: Dublin
Boat name: WIZARD
Make: REDBAY 7.4
Length: 7m +
Engine: OPTI 225
Join Date: Aug 2002
Posts: 417
I have just ordered A DURASAFE marine lock for our Raymarine C120 , it simply replaces the mounting knobs with ones with a lock on them ...... so the equipment cant be removed easly...... they are only new , and mailspeed dont even stock them .. I had to order from the US , as The UK importer dosent stock the RAymarine fittings
__________________
NOT THE SHARPEST KNIFE IN THE DRAWER
TIM is offline   Reply With Quote
Old 14 April 2005, 18:23   #4
Member
 
Country: UK - England
Town: Penzance
Boat name: Dark Angel
Make: Ribcraft
Length: 5.85
Engine: Mariner 90HP Four Stroke
Join Date: Oct 2003
Posts: 116
Hi Tim,

Sounds good, can you post a link?
Cheers
Mark
__________________
marknj is offline   Reply With Quote
Old 14 April 2005, 22:07   #5
Member
 
Hightower's Avatar
 
Country: UK - England
Town: Fareham
Length: 6m +
Join Date: Sep 2003
Posts: 7,866
I installed all my goodys in a removable sled dash that I made myself. It's off in a jiffy.

If I'm with other RIBs I tend to leave it all on, as there's always someone close by. If I'm in Cowes shopping or something !! I can remove everything in seconds and either put in a rucksack or lock in my deck storage.

Here's some pics
Attached Thumbnails
Click image for larger version

Name:	c5.jpg
Views:	245
Size:	170.7 KB
ID:	11348   Click image for larger version

Name:	c1.jpg
Views:	209
Size:	115.6 KB
ID:	11349   Click image for larger version

Name:	c2.jpg
Views:	268
Size:	117.6 KB
ID:	11350   Click image for larger version

Name:	c3.jpg
Views:	234
Size:	169.3 KB
ID:	11351  
__________________
Hightower is offline   Reply With Quote
Old 15 April 2005, 05:13   #6
Member
 
Country: USA
Town: Fairbanks
Boat name: Medved
Make: Solar
Length: 4m +
Engine: 50 Tohatsu
MMSI: 007
Join Date: Jun 2003
Posts: 124
clever

Hightower: Very clever, and it looks good, too. You oughta patent the thing. j
__________________
Life is a grizzly experience.
Jklingel is offline   Reply With Quote
Old 15 April 2005, 09:16   #7
Member
 
Country: UK - England
Town: nr Lymington
Boat name: JU-JU
Make: Halmatic PAC22
Length: 6m +
Engine: 140.5 Mermaid
Join Date: Sep 2003
Posts: 1,400
I’m not sure about these locks, my reasoning is that if someone wanted to steal your electronics they would only need to pull the whole unit off with the fixing bracket and if it anything like the Garmin ones I have they could do that with out any tools I think I would go for Hightowers excellent solution or something along the lines of computer cables with stick on pads Des
__________________
Scary Des is offline   Reply With Quote
Old 15 April 2005, 10:05   #8
TIM
Member
 
Country: Ireland
Town: Dublin
Boat name: WIZARD
Make: REDBAY 7.4
Length: 7m +
Engine: OPTI 225
Join Date: Aug 2002
Posts: 417
Removal is the best soulution , But with our Navman stuff the plugs started to wear and become loose , and corroded etc , form constant use ......The fact of the matter is if some scumbag is going to nick your Boat or Gear , its going to happen , and thats what insurance is for..... All youre trying to acheive is to make difficult and hope that they will slect and softer target , and not you ...

SAD BUT TRUE

Here is the link http://www.durasafe-usa.com/gps.htm
__________________
NOT THE SHARPEST KNIFE IN THE DRAWER
TIM is offline   Reply With Quote
Old 16 April 2005, 12:05   #9
Member
 
Country: Canada
Town: Newfoundland
Length: no boat
Join Date: May 2000
Posts: 2,100
On the principle that out of sight is out of mind, a cheapish option is to get a cover made up that goes over you console and electronics. That way when you make a lunchstop somewhere all you have to do is whip the cover out of a locker and fit it over the console and Bob's your uncle! Its not going to stop a determined thief but it does give them one more thing to do and it hides what you've got.
__________________
Out of the fog......
Alan is offline   Reply With Quote
Old 17 April 2005, 00:08   #10
Member
 
Country: UK - Scotland
Make: HumberOceanOffshore
Length: 8m +
Engine: Volvo KAD300/DPX
Join Date: Oct 2002
Posts: 5,596
Surface mount everything and have a loud alarm on the access area.
__________________
JW.
jwalker is offline   Reply With Quote
Old 17 April 2005, 12:32   #11
Member
 
Country: UK - Wales
Town: Southampton
Boat name: DynaMoHumm/ SRV/deja
Make: Avon8.4, 5.4 & 4.777
Length: 8m +
Engine: Cat3126 Yam 90 &70
MMSI: 42
Join Date: Dec 2003
Posts: 6,562
Hints and Tips

Quote:
Originally Posted by TIM
Removal is the best soulution , But with our Navman stuff the plugs started to wear and become loose , and corroded etc , form constant use ......

Here is the link http://www.durasafe-usa.com/gps.htm
I recently saw a boat that the owner had removed the Electronics and the three cables were inserted in 3 of the fingers of a Mechanics latex glove. Good Idea I thought!
__________________
Here it comes again, I don't stand a chance
Soul possession, Got me in a trance
Pullin' me back to you - Deja Voodoo
Rogue Wave is offline   Reply With Quote
Old 17 April 2005, 12:35   #12
Member
 
Country: UK - England
Town: Swinton Manchester
Length: 5m +
Join Date: Jul 2003
Posts: 179
Send a message via AIM to Graham H
I have a double quilt cover that goes over the whole console, not very stylish but it keeps unwanted eyes off.
Graham
__________________
Graham H is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 07:32.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.