Navman 7100 VHF Mic Clip.

Mollers · 04 May 2010, 19:42

Where's the best place to source one?

MikeCC · 05 May 2010, 15:41

Navimo / Plastimo might have some in the spares bin although it's not listed as a separate item.

Otherwise, the radio is known as the Northstar 710E.

Or eBay.

Downhilldai · 05 May 2010, 15:58

John at JGTech may be able to help you. He had a transducer in stock for an obsolete Navman Fishfinder when I was searching last year.

bedajim · 05 May 2010, 16:47

Quote:

Originally Posted by Downhilldai

John at JGTech may be able to help you. He had a transducer in stock for an obsolete Navman Fishfinder when I was searching last year.

So did that fit with the mic clip

Triggers new broom is going to be very smart

BruceB · 05 May 2010, 17:10

A mic clip as in the little stainless clip you have the mic on?
I may have an old Icom one, maybe. Any use if I can find it?

Mollers · 05 May 2010, 17:14

Quote:

Originally Posted by BruceB

A mic clip as in the little stainless clip you have the mic on?
I may have an old Icom one, maybe. Any use if I can find it?

Not sure if it was stainless or plastic. Cheers anyway.

willk · 05 May 2010, 17:18

Quote:

Originally Posted by Mollers

Not sure if it was stainless or plastic. Cheers anyway.

They're an odd little plastic fitting. I suspect they're specific to Navman.

Until you get sorted, might I suggest some sticky backed Velcro?

Mollers · 05 May 2010, 17:22

Quote:

Originally Posted by willk

They're an odd little plastic fitting. I suspect they're specific to Navman.

Until you get sorted, might I suggest some sticky backed Velcro?

Cheers Willk, it might come to that.

Downhilldai · 05 May 2010, 19:42

Quote:

Originally Posted by willk

Until you get sorted, might I suggest some sticky backed Velcro?

Bit posh for an SR4 there, willk

willk · 05 May 2010, 19:49

Quote:

Originally Posted by Downhilldai

Bit posh for an SR4 there, willk

Whaddaya mean? It's one of the Holey Trinity:

Duct Tape
Cable Ties
Velcro Strips

No SR4 should/could leave port without them

Downhilldai · 05 May 2010, 19:51

Quote:

Originally Posted by willk

Holey Trinity

Mollers · 05 May 2010, 20:40

Quote:

Originally Posted by Downhilldai

Bit posh for an SR4 there, willk

You think that's posh. My 'tame' fabricator has just quoted me £460 for the frame and £181 for the seat back.

He's very partial to a shant, I might drop him a case of Stella and ask him to try again an hour later.

willk · 05 May 2010, 21:15

Quote:

Originally Posted by Mollers

You think that's posh. My 'tame' fabricator has just quoted me £460 for the frame

That sounds rightish for s-s. You checked the price of steel lately?

Mollers · 05 May 2010, 21:20

Quote:

Originally Posted by willk

That sounds rightish for s-s.

Eh, this is a 'Celtic Oggy' economy, not 'Celtic Tiger'.

Downhilldai · 05 May 2010, 22:07

I've got an A-frame mid-fab at the moment as a little finishing touch for the SR4.7. I reckon it'll cost a lot less than that.

Give me the spec of the seat backrest and I'll make one up for you. I've got some 1" 316 tube by here.

Mollers · 06 May 2010, 06:55

Quote:

Originally Posted by Downhilldai

I've got an A-frame mid-fab at the moment as a little finishing touch for the SR4.7. I reckon it'll cost a lot less than that.

Give me the spec of the seat backrest and I'll make one up for you. I've got some 1" 316 tube by here.

He's apologised for hitting me with 'Docks' prices ( he's been doing a lot for Fal Docks recently) and said we could have a chat about it this am.