Heatshrink size

[Gramas]

Back with another question, what size heatshrink is needed to easily go over 1.5mm 12v wire and it's protective outer ?
Also need size of heatshrink as above but ends have been crimped onto spade connectors
Regards
Graham

[Trimix]

Its supposed to shrink to about 50% of its original size, so check the diameter of the crimped connector bits and work back. You could just buy a pack of mixed sizes cheap on the bay of fleas and then your sorted.

[Ian M]

Use adhesive lined heat shrink for marine use.

[Gramas]

Yes defo Ian just need to work out size to order

[SimonCh]

Rolson Tools 61299 127pc Heat Shrink Wire Wrap Assortment by Rolson http://www.amazon.co.uk/dp/B001MJ0BI..._ClsVsb1230Z18

I bought this kit - you will probably only use 2 of the sizes, but always handy to have

[Pikey Dave]

Maplins sell 3,6,9,12mm adhesive lined by the metre & not very expensive, buy one of each, it's handy stuff to have around. Make sure it's the adhesive lined though, as they sell both sorts.

[Gramas]

Originally Posted by Pikey Dave

Maplins sell 3,6,9,12mm adhesive lined by the metre & not very expensive, buy one of each, it's handy stuff to have around. Make sure it's the adhesive lined though, as they sell both sorts.

Cheers there's one 10mins from me