Reply
 
Thread Tools Search this Thread
 
Old 20 November 2014, 14:55   #1
Member
 
Country: UK - England
Town: Urmston
Length: 6m +
Engine: petrol
Join Date: Nov 2014
Posts: 7
Bilge Pump Recommendations

I currently have a rule-mate 500 GPH bilge pump which as packed up. This is the second time this pump has been replaced so am getting sick of replacing it. Does anyone have any recommendations as to a pump that is going to last?

P.S. hope this is in the right section
__________________
brennain1 is offline   Reply With Quote
Old 20 November 2014, 15:18   #2
Member
 
Country: USA
Town: Oakland CA
Length: 3m +
Join Date: Feb 2005
Posts: 6,653
A bilge pump can buy you time when things go bad aboard your boat.

Pump review results are in the links on the right side of the page.


Quote:
P.S. hope this is in the right section
Close enough, I'd say...


jky
__________________
jyasaki is offline   Reply With Quote
Old 20 November 2014, 15:40   #3
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
that review is not much good in my mind because it dose not say which one ill last longer than a season! which is about as long as I get out of a Rule 500 auto having said that the one in my ribeye is 8 years old and going Strong, maybe they don't make then like they used to
I have just bought one of these cheep as chips if it lasts more then a year I'm going to be happy compared to Rule prices!
AUTOMATIC 12V BILGE PUMP 750GPH WITH INTERNAL FLOAT SWITCH AUTO WATER BOAT | eBay
Biffer was advising the Johnson range the other day
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 20 November 2014, 17:45   #4
Member
 
Peter_C's Avatar
 
Country: USA
Town: NorCal
Boat name: SHARKY
Make: AB
Length: 4m +
Engine: Honda BF75 & BF5
Join Date: Dec 2009
Posts: 1,910
What part is failing so fast? I had two Rule 1100 GPH in my Nautique that lasted until I sold the boat. The separate water switch however did fail and was replaced with a solid state switch. Often it is just the switches that fail which is why I like them separate with a manual on switch too.

Maybe the wiring is not sealed well enough and they are getting water intrusion? Or was there debris causing it to lock up with power still applied, which will smoke the pump. I would take them apart and figure out what is failing. Rules tend to be decent pumps, and are probably the most commonly installed pump here in the USA.
__________________
Peter_C is offline   Reply With Quote
Old 20 November 2014, 20:18   #5
Member
 
Country: UK - Scotland
Town: wormit
Boat name: lots of them
Make: various
Length: no boat
Engine: all types
Join Date: Dec 2004
Posts: 618
I use Rule as a rule
__________________
Davie is offline   Reply With Quote
Old 20 November 2014, 20:37   #6
RIBnet Supporter
 
willk's Avatar
 
Country: Ireland
Length: 4m +
Join Date: Feb 2008
Posts: 14,682
Quote:
Originally Posted by Nick Hearne View Post
I have just bought one of these cheep as chips if it lasts more then a year I'm going to be happy compared to Rule prices!
AUTOMATIC 12V BILGE PUMP 750GPH WITH INTERNAL FLOAT SWITCH AUTO WATER BOAT | eBay
Identical moulding to the Attwood Sahara pumps - dunno if a knockoff or sister product... Sahara fitted as standard by Redbay Boats.
__________________
I'm sorry, but there IS no Mars Bar.
willk is offline   Reply With Quote
Old 21 November 2014, 08:15   #7
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Bilge pumps seem one of those things that we all have trouble with!
I have twin high volume Whale autos at the mo...whic RC changed to some time ago,and I must say.... so far so good!
(is that temping Fate or what!?).... I do carry a spare as well though!
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 21 November 2014, 08:55   #8
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Personally, I see little point in having a bilge pump on a O/B rib as there is no bilge, only a sealed floor. Unless you have a deep well to protect it, they just get booted constantly and then, it's only emptying the well.

Ribs are designed to be wet and a have a darn great 'drain' hole back aft.

The only time that I ever used one was to clear a bit of rain water if she'd been left on the water overnight. I never wear footwear that wont cope with an inch of fresh water.

It's an 'I must have a bilge pump' item, nah you don't.

I/B ribs are a different story.
__________________
Mollers is offline   Reply With Quote
Old 21 November 2014, 12:27   #9
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by Mollers View Post
Personally, I see little point in having a bilge pump on a O/B rib as there is no bilge, only a sealed floor. Unless you have a deep well to protect it, they just get booted constantly and then, it's only emptying the well.

Ribs are designed to be wet and a have a darn great 'drain' hole back aft.

The only time that I ever used one was to clear a bit of rain water if she'd been left on the water overnight. I never wear footwear that wont cope with an inch of fresh water.

It's an 'I must have a bilge pump' item, nah you don't.

I/B ribs are a different story.
I have Two Deep wells....with Pumps in my RIB and the floor stays nice and dry regardless,even in the roughest weather,which IMO is just a good design feature
Of course when it's really Knarley I put the TWO Elephant hose's down too!
Pikey Dave did a nice Mod with heavy duty Fibreglass grating over the top...which I unashamably Filched and it works well.
Bilges and pumps are also indespensible when it's on a Mooring for a few days or a week or two (as mine often is)..with auto bilges left on even Torential rain is no problem....even overnight.
It's very surprising how quickly a RIB will begin to fill when they fail....it happened to me on my old Boat!
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 21 November 2014, 13:06   #10
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by Maximus View Post
I have Two Deep wells....with Pumps in my RIB and the floor stays nice and dry regardless,even in the roughest weather!
If you have dry floors even in the roughest weather, you're on a trailer with the cover on. I'm awash, trunk down wearing white knuckles, in the roughest weather. A pump is as much use a straw when it's really coming in, that's why trunks are there.

Our SR lives on a swinging mooring for most of the summer, I wouldn't leave it for two weeks without using/visiting it.

Two weeks of heavy rain and pump on auto would eat into batteries big time. What a ballache, sorting flat batteries on a mooring? I'd rather bung it out with a bucket.
__________________
Mollers is offline   Reply With Quote
Old 21 November 2014, 13:12   #11
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by Maximus View Post
Pikey Dave ........which I unashamably Filched
Stroll on!! We know that you're mates 'an all that!
__________________
Mollers is offline   Reply With Quote
Old 21 November 2014, 13:28   #12
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by Mollers View Post
Stroll on!! We know that you're mates 'an all that!
Obviously "Different" connotations down your way!...like a lot of things eh
I know it's a thread about Bilges...
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 21 November 2014, 15:45   #13
Member
 
Maximus's Avatar
 
Country: UK - England
Town: Wild West
Boat name: No Boat
Make: No Boat
Length: under 3m
Join Date: Jan 2008
Posts: 5,305
Send a message via AIM to Maximus
Quote:
Originally Posted by Mollers View Post
If you have dry floors even in the roughest weather, you're on a trailer with the cover on. I'm awash, trunk down wearing white knuckles, in the roughest weather. A pump is as much use a straw when it's really coming in, that's why trunks are there.

Our SR lives on a swinging mooring for most of the summer, I wouldn't leave it for two weeks without using/visiting it.

Two weeks of heavy rain and pump on auto would eat into batteries big time. What a ballache, sorting flat batteries on a mooring? I'd rather bung it out with a bucket.
There's no problem...IF you USE your RIB....you charge the Batteries..remember?
Although I'm sure useing a Bucket must be ACE!..Great fun!
__________________
A clever Man learns by his mistakes..
A Wise Man learns by other people's!

The Road to HELL ..is Paved with "Good inventions!"
Maximus is offline   Reply With Quote
Old 21 November 2014, 15:59   #14
Member
 
Johnscubanut's Avatar
 
Country: UK - England
Town: Beds/South coast
Make: Ribcraft 585
Length: 6m +
Engine: Yam 115
Join Date: Jul 2010
Posts: 294
We have 2 Rule auto pumps situated in the splashwell. Work fine so far! When you are not under power & you have a couple of hairy-arsed soaking wet divers coming onboard you need to shift the water they bring with them fairly rapid! Of course we can also use the 2 big elephants trunks when underway, but not had to yet!
The boat sits fairly low due to the heavy Yam 115 four stroke, so these pumps seem do the job of reducing the extra weight of water.
__________________
Johnscubanut is offline   Reply With Quote
Old 21 November 2014, 16:06   #15
Member
 
Johnscubanut's Avatar
 
Country: UK - England
Town: Beds/South coast
Make: Ribcraft 585
Length: 6m +
Engine: Yam 115
Join Date: Jul 2010
Posts: 294
Best pump in the world is............. A frightened man & a bucket! Ha ha.
__________________
Johnscubanut is offline   Reply With Quote
Old 21 November 2014, 16:12   #16
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by Johnscubanut View Post
Best pump in the world is............. A frightened man & a bucket! Ha ha.
I managed to clout a hole in the Old Man's boat years ago when out fishing with some pals. 2 worried 15 year olds with tupperwear lunch boxes were surprisingly effective too.
__________________
Mollers is offline   Reply With Quote
Old 21 November 2014, 17:48   #17
Member
 
Pikey Dave's Avatar
 
Country: UK - England
Town: South Yorks
Boat name: Black Pig
Make: Ribcraft
Length: 5m +
Engine: DF140a
MMSI: 235111389
Join Date: Feb 2008
Posts: 11,883
RIBase
Quote:
Originally Posted by Mollers View Post
Stroll on!! We know that you're mates 'an all that!
I think that you're mixing your "E" 's with yer "I" 's.

Any back to the OP- I have a pair of aforesaid 500gph rule autos on BP & they are still going strong after 6 years, just make sure you clean the crud (dog hair) out of the strainer regularly. I use the pumps regularly, especially when fishing, I chuck a bucket of water down the boat to wash off the fish blood & flick the pumps on to empty the bilges wells so we aren't paddling about in manky water, otherwise we'd have to start her up, drop the bailers & move off our fishing marks, just to clear the crap.
__________________
Rule#2: Never argue with an idiot. He'll drag you down to his level & then beat you with experience.
Rule#3: Tha' can't educate pork.
Rule#4:Don't feed the troll
Pikey Dave is offline   Reply With Quote
Old 21 November 2014, 20:48   #18
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by Pikey Dave View Post
I think that you're mixing your "E" 's with yer "I" 's.

.
Ah, that'll be his funny accent.
__________________
Mollers is offline   Reply With Quote
Old 22 November 2014, 11:19   #19
Member
 
Nick Hearne's Avatar
 
Country: UK - England
Town: Bucks
Boat name: Blue & Ding Dong
Make: Ribeye,SR4 & Bombard
Length: 6m +
Engine: 115,50 & 15Hp Yams
Join Date: Feb 2004
Posts: 3,252
Quote:
Originally Posted by Mollers View Post
Personally, I see little point in having a bilge pump on a O/B rib as there is no bilge, only a sealed floor. Unless you have a deep well to protect it, they just get booted constantly and then, it's only emptying the well.

Ribs are designed to be wet and a have a darn great 'drain' hole back aft.

The only time that I ever used one was to clear a bit of rain water if she'd been left on the water overnight. I never wear footwear that wont cope with an inch of fresh water.

It's an 'I must have a bilge pump' item, nah you don't.

I/B ribs are a different story.
I use mine when the boat is left on mooring for some time this happens with both my Ribeye and SR4!
Never had a problem with them draining the battery and for me it is a long way out past the speed limit to get up the speed necessary to clear the water with the trunk!
It amazes me how quickly the they can fill up with water and if I’m 200 + miles away I cannot just pop down to bail them out!
__________________
Member of the Ribeye supporters club!!!
Member of Bombard 380 Aerotec club
Member of SR4 club
Nick Hearne is offline   Reply With Quote
Old 22 November 2014, 11:28   #20
Member
 
Country: UK - England
Town: Mighty Penryn
Boat name: Little Joe.
Make: Avon Searider
Length: 4m +
Engine: Honda BF50
Join Date: Aug 2005
Posts: 8,872
Quote:
Originally Posted by Nick Hearne View Post
I use mine when the boat is left on mooring for some time this happens with both my Ribeye and SR4!

Never had a problem with them draining the battery and for me it is a long way out past the speed limit to get up the speed necessary to clear the water with the trunk!

It amazes me how quickly the they can fill up with water and if I’m 200 + miles away I cannot just pop down to bail them out!

Right on. A BP is good for you then? ;-) I did state the no BP was my personal preference. :-)
__________________
Mollers is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 18:21.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.