Reply
 
Thread Tools Search this Thread
 
Old 09 January 2012, 04:40   #1
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Yamaha Beto V4 130 - Problem

My outboard has suddenly developed a nasty rattle! Was out yesterday on the Forth, brother was driving and we were doing around 38 knots, WOT, trimmed right out, he slowed down to a stop but never trimmed the engine back down, but it was still low enough to be pumping water, prop still under the water etc, trimmed it right back down, and it stalled, started up again right away but it sounded rough, with a strange rattle sound every few seconds. Motored back into the marina but with a definite drop in power. Engine was given a full service 5 months ago and given a clean bill of health then, has done around 30 hours since and never any problems. Has been left with the company who serviced it at the marina to have a look at it but I feel like I have a huge bill coming! Any ideas chaps?
__________________
Shog69 is offline   Reply With Quote
Old 09 January 2012, 08:03   #2
Member
 
Join Date: Jun 2010
Posts: 2,934
was it knocking out of gear?

any difference with more/less revs?

any smell of fuel when it cut?

if you still have the motor handy i'd check compression to start.

cheers
__________________
Xk59D is offline   Reply With Quote
Old 09 January 2012, 18:09   #3
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
was it knocking out of gear? - No

any difference with more/less revs? - Slightly more noise with higher revs

any smell of fuel when it cut? - No smell of fuel when it cut out.

if you still have the motor handy i'd check compression to start. - It's down at the marina but if they dont get round to looking at it in the next few days I'll pop down and check that myself.

cheers
__________________
Shog69 is offline   Reply With Quote
Old 09 January 2012, 18:39   #4
Member
 
Join Date: Jun 2010
Posts: 2,934
it might be a gearbox problem if it stops out of gear. go spin the prop/check for anything loose.

keep us updated.

cheers
__________________
Xk59D is offline   Reply With Quote
Old 12 January 2012, 06:48   #5
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Prop and gearbox are fine, sounds like it may be big end.
__________________
Shog69 is offline   Reply With Quote
Old 12 January 2012, 06:56   #6
Member
 
Join Date: Jun 2010
Posts: 2,934
ouch, you going to rebuild it?

cheers
__________________
Xk59D is offline   Reply With Quote
Old 12 January 2012, 16:03   #7
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Well, I should know for sure tomorrow, but all comes down to cost.
__________________
Shog69 is offline   Reply With Quote
Old 12 January 2012, 17:51   #8
Member
 
Country: UK - England
Town: Plymouth
Length: 6m +
Join Date: Mar 2011
Posts: 2,693
Keep us updated as I know of some part from a Submerged Yam 115 V4 which would fit. May get it back to life dependant on what's needed

Peter ~ Boatsandoutboards4sale ~ askboatsandoutboards4sale@sky.com ~ 07930 421007
__________________
Boats&Outboards is offline   Reply With Quote
Old 12 January 2012, 17:56   #9
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Excellent, will let you know hopefully sometime in the next few days!
__________________
Shog69 is offline   Reply With Quote
Old 13 January 2012, 17:10   #10
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Bad news today about my engine, it chucked a piston and the engine block is damaged beyond repair. So, kinda gutted! Thinking, new engine and sell the Yam for spares or repair, the rest of it is all good. What do you think I could get for it?
__________________
Shog69 is offline   Reply With Quote
Old 13 January 2012, 17:58   #11
Member
 
Jizm's Avatar
 
Country: UK - England
Town: Southampton
Boat name: Hissing Sid
Make: Ross Smith Cobra
Length: 6m +
Engine: 200HP Optimax
MMSI: 235038046
Join Date: Jun 2002
Posts: 3,804
Quote:
Originally Posted by Shog69
Bad news today about my engine, it chucked a piston and the engine block is damaged beyond repair. So, kinda gutted! Thinking, new engine and sell the Yam for spares or repair, the rest of it is all good. What do you think I could get for it?
Break it up into bits and sell it yourself. Best bet if you can.
Jizm is offline   Reply With Quote
Old 13 January 2012, 18:12   #12
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Got one of my customers wanting to look at it first as he's re-built a few outboards and engines in his time, and always says anything can be fixed. Will need a new engine block, piston etc. it got us back in from 3 miles out so it still runs
__________________
Shog69 is offline   Reply With Quote
Old 13 January 2012, 18:15   #13
Member
 
Country: UK - England
Town: Plymouth
Length: 6m +
Join Date: Mar 2011
Posts: 2,693
I agree break it for spares and you may get a good return towards it's replacement.

Peter ~ Boatsandoutboards4sale ~ askboatsandoutboards4sale@sky.com ~ 07930 421007
__________________
Boats&Outboards is offline   Reply With Quote
Old 15 January 2012, 17:43   #14
Member
 
Country: UK - Scotland
Town: Livingston
Boat name: Volante
Make: Osprey Eagle 5.6m
Length: 5m +
Engine: Mariner Optimax 125
Join Date: May 2010
Posts: 94
Not got the time or the skills to do this. Will sell the whole outboard for £500 if anybody wants it come and remove it from my rhib.
__________________
Shog69 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 23:53.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.