Yamaha 225HP 2003

[Kevin Redbond]

Does anyone have a S/H prop for a 2003 Yamaha 225 (Fitted to a Ribeye 785S) S/Steel or Aluminium by any chance ?

[C2 RIBS]

Kev, I have two Yam ali props which I think are 225 /250 sizes, can you get me the sizes you need and I will check in garage tomorrow evening , still in their boxes and no damage etc

[C2 RIBS]

Kevin the Yam props I have are both black Ali types, three bladed and are

13 3/8 X 25 M no damage but with black paint come off on some areas.
14 1/2 X 17 M unmarked

[Kevin Redbond]

Originally Posted by C2 RIBS

Kevin the Yam props I have are both black Ali types, three bladed and are

13 3/8 X 25 M no damage but with black paint come off on some areas.
14 1/2 X 17 M unmarked

Hi Matey

Ribeye tell me that it should have a 23 inch x 13 3/8 3 blade prop' so I couldn't quite make out your 25 M .... ? I've related that to metric and it bears no relation to 23" (would be 580 mm.

Any thoughts ? K

[Trailer Bloke]

Originally Posted by Kevin Redbond

Hi Matey

Ribeye tell me that it should have a 23 inch x 13 3/8 3 blade prop' so I couldn't quite make out your 25 M .... ? I've related that to metric and it bears no relation to 23" (would be 580 mm.

Any thoughts ? K

Kevin

IMO this will work although it way be a little slow onto the plane

[PBAY]

Originally Posted by Kevin Redbond

Hi Matey

Ribeye tell me that it should have a 23 inch x 13 3/8 3 blade prop' so I couldn't quite make out your 25 M .... ? I've related that to metric and it bears no relation to 23" (would be 580 mm.

Any thoughts ? K

I believe that is the pitch Kevin. Would make for a pretty hefty prop otherwise! It is basically the third dimension :-) / distance traveled through the water in one rotation if the water were solid etc.

What I found interesting about all these apparently significantly different size and pitch props is the range of sizes and pitches available for the different type of jobs the engines must apparently do.

CFN

P

[outboardtech]

Hi, i have a 13 3/4 x 19 SST M2 Prop if you keen. It will get your revs up on that rig but you may loose abit on top end. good for skiing though this prop. its second hand and could do with a touch up.CHEERS

[C2 RIBS]

Kevin, all these figure are doing my head in. You are welcome to try the units and let me know. I believe the 25 was on my 785 and I also bought the opther one to trial also.

The 785 is due to run into Dartmouth very shortly for inspection like an MOT I guess so I might find out more as I intend to discuss the prop on the 250hp.

If all else fails ask the main man at Yamaha.

[Kevin Redbond]

Originally Posted by C2 RIBS

Kevin, all these figure are doing my head in. You are welcome to try the units and let me know. I believe the 25 was on my 785 and I also bought the opther one to trial also.

The 785 is due to run into Dartmouth very shortly for inspection like an MOT I guess so I might find out more as I intend to discuss the prop on the 250hp.

If all else fails ask the main man at Yamaha.

What-Ho

This one is not directly for me, so wont take you up on the "try" offer (but thanks !)

Would ask the "main man" if he weren't in Dusseldorf .... !

What do you want for the 25 and I can offer it for you ?

Best K :-)

[Kevin Redbond]

Originally Posted by outboardtech

Hi, i have a 13 3/4 x 19 SST M2 Prop if you keen. It will get your revs up on that rig but you may loose abit on top end. good for skiing though this prop. its second hand and could do with a touch up.CHEERS

Inclined to agree re the 'top-end'

Also explained to C2 this is for an industry 'friend' not myself. Care to name a price and I will offer it on for you ? You can PM me if that suits better.

K