Reply
 
Thread Tools Search this Thread
 
Old 11 April 2012, 05:56   #1
Member
 
Country: UK - England
Town: hampshire
Length: 7m +
Join Date: Apr 2012
Posts: 353
What propeller for a Yamaha F115 on Avon 620

as above, anyone now which stainless or alloy prop to put on a Yamaha F115 fitted to Avon 620? Any idea where from and price. Any help appreciated
__________________
wellhouse is offline   Reply With Quote
Old 11 April 2012, 13:49   #2
Member
 
Dry Run's Avatar
 
Country: UK - England
Town: portsmouth
Boat name: Hullabaloo
Make: Humber
Length: 8m +
Engine: 225 Optimax
Join Date: Mar 2011
Posts: 945
RIBase
Hi,

We use these on the Dry Stack for Avon 620 + Yamaha 115 4-stroke.

Propellers - Marine Tech

Hope that helps.
__________________
Dry Run is offline   Reply With Quote
Old 11 April 2012, 15:50   #3
Member
 
Country: USA
Town: Oakland CA
Length: 3m +
Join Date: Feb 2005
Posts: 6,653
You really have to run the thing to know which prop to use.

Ideally, you'll rev to near the top of the suggested rpm range with a "normal" load (what you expect to run with usually) at WOT. You may need to balance the WOT rpm with hole shot depending on what you use the boat for.

I have an 18' aluminum hull RIB that's fairly beamy, and I'm running a Solas 4-blade SS prop spec'd at 13.75" (I think) x 15. I could probably stand to drop another inch in pitch, but that's not a standard size, and I haven't had the inclination to have the peop modified yet.

jky
__________________
jyasaki is offline   Reply With Quote
Old 11 April 2012, 16:34   #4
Member
 
Country: USA
Town: Seattle
Boat name: Water Dog
Make: Polaris
Length: 4m +
Engine: Yamaha 60hp
Join Date: Apr 2007
Posts: 1,152
On most of the other 20-ish foot RIBs listed listed in Yamaha's performance bulletins for the F115 they ran a 13x19 ali prop with a light load. Like this one:
http://www.yamahaoutboards.com/sites...an-f115txr.pdf

The avon is 330lbs lighter so I imagine would be a little faster. They used that prop on 18' Zodiacs with a max rpm of 6K too, so I don't think its will over-rev on your Avon. Based on these data I would start with a 13x19 ali 3 blade. The Yamaha props will have the same blade dimensions and area as those in the performance bulletin. Other brands 13x19 will vary in blade shape/area and you may overrev those. Since the Yam 13x19 operates at 6k on boats like yours I doubt using a different brand will result in under-reving.
__________________
captnjack is offline   Reply With Quote
Old 11 April 2012, 18:05   #5
Member
 
Country: UK - England
Town: hampshire
Length: 7m +
Join Date: Apr 2012
Posts: 353
prop

Quote:
Originally Posted by Dry Run View Post
Hi,

We use these on the Dry Stack for Avon 620 + Yamaha 115 4-stroke.

Propellers - Marine Tech

Hope that helps.
what sort of top speed/fuel economy are you getting? thanks
speed with revs i.e 2000rpm = 3000rpm = 4000rpm = etc
__________________
wellhouse is offline   Reply With Quote
Old 11 April 2012, 18:12   #6
Member
 
Country: UK - England
Town: hampshire
Length: 7m +
Join Date: Apr 2012
Posts: 353
prop

Quote:
Originally Posted by captnjack View Post
On most of the other 20-ish foot RIBs listed listed in Yamaha's performance bulletins for the F115 they ran a 13x19 ali prop with a light load. Like this one:
http://www.yamahaoutboards.com/sites...an-f115txr.pdf

The avon is 330lbs lighter so I imagine would be a little faster. They used that prop on 18' Zodiacs with a max rpm of 6K too, so I don't think its will over-rev on your Avon. Based on these data I would start with a 13x19 ali 3 blade. The Yamaha props will have the same blade dimensions and area as those in the performance bulletin. Other brands 13x19 will vary in blade shape/area and you may overrev those. Since the Yam 13x19 operates at 6k on boats like yours I doubt using a different brand will result in under-reving.
i'm using a yamaha 13 x 19 ali prop and it goes straight to 6000rpm and i feel it is under propped. you don't get much extra speed between 5000-6000rpm?
__________________
wellhouse is offline   Reply With Quote
Old 11 April 2012, 20:59   #7
Member
 
Country: USA
Town: Seattle
Boat name: Water Dog
Make: Polaris
Length: 4m +
Engine: Yamaha 60hp
Join Date: Apr 2007
Posts: 1,152
Quote:
Originally Posted by wellhouse View Post
i'm using a yamaha 13 x 19 ali prop and it goes straight to 6000rpm and i feel it is under propped. you don't get much extra speed between 5000-6000rpm?
Well you didn't say you had anything at all before...

Since you feel its underpropped why don't you try a 13x21"? Assuming the exact same load, that should drop you to 5600-5700rpm WOT. I would not expect much more speed with the 21", maybe 40kn. Once you have a starting point its all trial and error after that.
__________________
captnjack is offline   Reply With Quote
Old 12 April 2012, 05:15   #8
Member
 
Country: UK - England
Town: hampshire
Length: 7m +
Join Date: Apr 2012
Posts: 353
prop

Quote:
Originally Posted by captnjack View Post
Well you didn't say you had anything at all before...

Since you feel its underpropped why don't you try a 13x21"? Assuming the exact same load, that should drop you to 5600-5700rpm WOT. I would not expect much more speed with the 21", maybe 40kn. Once you have a starting point its all trial and error after that.
thanks, it could be the propellor has been re-profiled quite a few times since 2001 and just needs replacing like for like as maybe it's worn down? Getting about 41kn at the moment flat out, thanks for the suggestion and link.
__________________
wellhouse is offline   Reply With Quote
Old 12 April 2012, 21:08   #9
Member
 
Country: UK - England
Town: Nr Faversham, Kent
Boat name: C Rider
Make: Avon
Length: 5m +
Engine: Yam 80
Join Date: Jan 2005
Posts: 513
I run a 21" on an F80 when cruising. Normally get 35kn at about 5,300 rpm one up.
Given the engine is 13yr old I would rather under rev it.
__________________
Searider - The Best 5.4 x Far
Swifty is offline   Reply With Quote
Old 12 April 2012, 23:54   #10
Member
 
Country: USA
Town: Seattle
Boat name: Water Dog
Make: Polaris
Length: 4m +
Engine: Yamaha 60hp
Join Date: Apr 2007
Posts: 1,152
There are other F115s in Yamaha's performance bulletins but nothing matches quite as close as that Zodiac to your Avon.

At least over here people rarely fix ali props they just replace them. That said if the diameter is reduced via wear or repairs, that makes a huge difference on performance. As much as an inch+ of pitch IMHO.
__________________
captnjack is offline   Reply With Quote
Old 13 April 2012, 13:10   #11
Member
 
Country: USA
Town: Northport
Boat name: Zazu
Make: Nautica
Length: 7m +
Engine: outboard
Join Date: Apr 2012
Posts: 37
We had a 2002 Yamaha 115F on a Nautica 19' flushdeck for 6 seasons of use. The dimensions on the Nautica seem similar at 19' long , 8' 2" beam and about #1,800 as it was in use with all accesories aboard but no passengers.
Over the years we had used 3 different props with good results:
1. Yamaha al 19" pitch 3 blade - Good but slightly underpropped
2. Solas Amita al 21" 4 blade - Fast but overpropped a bit when skiing or loaded heavy (5,600 max rpm's with 6 aboard)
3. Solas Amita al 19" 4 blade - Best prop for all around use allowing us to reach full rpm (6,000) just about in any condition. Good for skiing, good cruise at lower rpm, less vibration and relatively cheap.

Hope this helps
__________________
smitty477 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




All times are GMT. The time now is 19:05.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.