Reply
 
Thread Tools Search this Thread
 
Old 19 June 2019, 07:16   #1
Member
 
Country: UK - England
Town: Waterlooville
Boat name: Tickler
Make: Halmatic P22
Length: 6m +
Engine: Inboard Diesel 140HP
MMSI: 235115642
Join Date: Sep 2015
Posts: 576
RIBase
Wet Exhaust Sealant

On my diesel inboard the exhaust outlet is underwater.

The outlet is an aluminium tube with a flange on it that bolts through the transom. There is about 300mm of tube on the inside of the transom.

I'm going to use a couple of Mikalor clamps to seal the exhaust hose to the outlet but does anyone put sealant in the joint and if so, what do they use?
__________________

__________________
GuyC is offline   Reply With Quote
Old 20 June 2019, 14:55   #2
Member
 
Country: UK - Scotland
Town: Nairn
Boat name: Futuristic
Make: Chameleon Craft 10
Length: 10m +
Engine: Yanmar 315 diesel
Join Date: Dec 2012
Posts: 27
Dirko Sealant

Hi
You might want to look at the soec of this sealant if you need some

https://www.ebay.co.uk/itm/Elring-Di...EAAOSwzgBY2kHL

Regards EW
__________________
drumblair is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 02:14.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.